muas3001: activate WDT for the muas3001 board.
[POWERPC] muas3001: activate WDT for the muas3001 board.
Signed-off-by Heiko Schocher <[email protected]>
--- include/configs/muas3001.h | 20 +++++++++++++++++--- 1 files changed, 17 insertions(+), 3 deletions(-)
include/configs/muas3001.h +17 -3
@@ -38,6 +38,9 @@/* Do boardspecific init */ #define CONFIG_BOARD_EARLY_INIT_R 1 +/* enable Watchdog */ +#define CONFIG_WATCHDOG 1 +/* * Select serial console configuration *
@@ -181,8 +184,6 @@#define CONFIG_BOOTCOMMAND "run net_nfs"#define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */ -#undef CONFIG_WATCHDOG/* disable platform specific watchdog */ -/* * Miscellaneous configurable options */
@@ -277,11 +278,24 @@#define CFG_HID2 0#define CFG_SIUMCR 0x00200000 -#define CFG_SYPCR 0xFFFFFFC3#define CFG_BCR 0x004c0000#define CFG_SCCR 0x0/*----------------------------------------------------------------------- +* SYPCR - System Protection Control 4-35 +* SYPCR can only be written once after reset! +*----------------------------------------------------------------------- +* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable +*/ +#if defined(CONFIG_WATCHDOG ) +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) +#else +#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ + SYPCR_SWRI|SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +/*----------------------------------------------------------------------- * RMR - Reset Mode Register 5-5 *----------------------------------------------------------------------- * turn on Checkstop Reset Enable
Signature · 5 lines
1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedDear Heiko Schocher,
Quoted 6 lines · In message <[email protected]> you wrote:
[POWERPC] muas3001: activate WDT for the muas3001 board.
Signed-off-by Heiko Schocher <[email protected]>--- include/configs/muas3001.h | 20 +++++++++++++++++--- 1 files changed, 17 insertions(+), 3 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Obviously, a major malfunction has occurred."
-- Steve Nesbitt, voice of Mission Control, January 28,
1986, as the shuttle Challenger exploded within view
of the grandstands.