Skip to contentSkip to conversation

muas3001: activate WDT for the muas3001 board.

U-Boot Applied Heiko Schocher 2 participants 2 messages Sep 8, 2008 – Sep 10, 2008

lore
Share & tools
lore
#0 lore raw

[POWERPC] muas3001: activate WDT for the muas3001 board.

---
 include/configs/muas3001.h |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)
include/configs/muas3001.h +17 -3
index 5d157b6..55f7b1e 100644
@@ -38,6 +38,9 @@
 /* Do boardspecific init */
 #define CONFIG_BOARD_EARLY_INIT_R       1
 
+/* enable Watchdog */
+#define CONFIG_WATCHDOG		1
+
 /*
  * Select serial console configuration
  *
@@ -181,8 +184,6 @@
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
-#undef	CONFIG_WATCHDOG			/* disable platform specific watchdog */
-
 /*
  * Miscellaneous configurable options
  */
@@ -277,11 +278,24 @@
 #define CFG_HID2		0
 
 #define CFG_SIUMCR		0x00200000
-#define CFG_SYPCR		0xFFFFFFC3
 #define CFG_BCR			0x004c0000
 #define CFG_SCCR		0x0
 
 /*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control                             4-35
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
+#else
+#define CFG_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
+			 SYPCR_SWRI|SYPCR_SWP)
+#endif /* CONFIG_WATCHDOG */
+
+/*-----------------------------------------------------------------------
  * RMR - Reset Mode Register                                     5-5
  *-----------------------------------------------------------------------
  * turn on Checkstop Reset Enable
Signature · 5 lines
1.5.6.1

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw

Dear Heiko Schocher,

Quoted 6 lines · In message <[email protected]> you wrote:

[POWERPC] muas3001: activate WDT for the muas3001 board.

---
 include/configs/muas3001.h |   20 +++++++++++++++++---
 1 files changed, 17 insertions(+), 3 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 7 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Obviously, a major malfunction has occurred."
              -- Steve Nesbitt, voice of Mission Control, January 28,
                 1986, as the shuttle Challenger exploded within view
                 of the grandstands.