Skip to contentSkip to conversation

Uboot Ethernet driver for Broadcom BCM5481 PHY

U-Boot Matheos Worku 2 participants 5 messages Nov 11, 2008

lore
Share & tools
lore
#0 lore raw

Hi,

I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?

Regards
Matheos

#1 lore raw

Hi Matheos,

Quoted 5 lines · Matheos Worku

Hi,

I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?

What are you connecting it to?

regards,
Ben

#2 lore raw
Quoted 5 lines · Ben Warren

Hi Matheos,

Matheos Worku wrote:

Quoted 10 lines
Quoted 7 lines

Hi,

I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?

What are you connecting it to?

Ben,

The CPU I would be using is Freescale MPC85XX family (with built in GIANFAR MAC). RJ45 on the networking side.
Regards
Matheos

Quoted 8 lines

regards,
Ben
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

#3 lore raw
Quoted 16 lines · Matheos Worku
Quoted 5 lines · Ben Warren

Hi Matheos,

Matheos Worku wrote:

Quoted 9 lines
Quoted 6 lines

Hi,

I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?

What are you connecting it to?

Quoted 6 lines

Ben,

The CPU I would be using is Freescale MPC85XX family (with built in GIANFAR MAC). RJ45 on the networking side.
Regards
Matheos

There's in-tree support for the BCM5461 and BCM5464 in drivers/net/tsec.c (which is the gianfar driver), and support for the BMC5481 on the UEC driver (drivers/qe/uec.c). Between the two you should be able to get this working pretty easily. There's slow ongoing work on unifying the PHY drivers, but it's not there yet.

regards,
Ben

#4 lore raw
Quoted 23 lines · Ben Warren
Quoted 16 lines · Matheos Worku
Quoted 5 lines · Ben Warren

Hi Matheos,

Matheos Worku wrote:

Quoted 9 lines
Quoted 6 lines

Hi,

I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?

What are you connecting it to?

Quoted 6 lines

Ben,

The CPU I would be using is Freescale MPC85XX family (with built in GIANFAR MAC). RJ45 on the networking side.
Regards
Matheos

Quoted 8 lines

There's in-tree support for the BCM5461 and BCM5464 in drivers/net/tsec.c (which is the gianfar driver), and support for the BMC5481 on the UEC driver (drivers/qe/uec.c). Between the two you should be able to get this working pretty easily. There's slow ongoing work on unifying the PHY drivers, but it's not there yet.

regards,
Ben

Ben,

Thanks a lot for the info.
Regards
Matheos