Uboot Ethernet driver for Broadcom BCM5481 PHY
Hi,
I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?
Regards
Matheos
Hi Matheos,
Quoted 5 lines · Matheos Worku
Hi,
I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?
What are you connecting it to?
regards,
Ben
Quoted 5 lines · Ben Warren
Hi Matheos,
Matheos Worku wrote:
Quoted 10 lines
Quoted 7 lines
Hi,
I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?
What are you connecting it to?
Ben,
The CPU I would be using is Freescale MPC85XX family (with built in GIANFAR MAC). RJ45 on the networking side.
Regards
Matheos
Quoted 8 lines
regards,
Ben
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Quoted 16 lines · Matheos Worku
Quoted 5 lines · Ben Warren
Hi Matheos,
Matheos Worku wrote:
Quoted 9 lines
Quoted 6 lines
Hi,
I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?
What are you connecting it to?
Quoted 6 lines
Ben,
The CPU I would be using is Freescale MPC85XX family (with built in GIANFAR MAC). RJ45 on the networking side.
Regards
Matheos
There's in-tree support for the BCM5461 and BCM5464 in drivers/net/tsec.c (which is the gianfar driver), and support for the BMC5481 on the UEC driver (drivers/qe/uec.c). Between the two you should be able to get this working pretty easily. There's slow ongoing work on unifying the PHY drivers, but it's not there yet.
regards,
Ben
Quoted 23 lines · Ben Warren
Quoted 16 lines · Matheos Worku
Quoted 5 lines · Ben Warren
Hi Matheos,
Matheos Worku wrote:
Quoted 9 lines
Quoted 6 lines
Hi,
I was wondering if a uboot ethernet PHY driver for Broadcom BCM5481 PHY exists?
What are you connecting it to?
Quoted 6 lines
Ben,
The CPU I would be using is Freescale MPC85XX family (with built in GIANFAR MAC). RJ45 on the networking side.
Regards
Matheos
Quoted 8 lines
There's in-tree support for the BCM5461 and BCM5464 in
drivers/net/tsec.c(which is the gianfar driver), and support for the BMC5481 on the UEC driver (drivers/qe/uec.c). Between the two you should be able to get this working pretty easily. There's slow ongoing work on unifying the PHY drivers, but it's not there yet.regards,
Ben
Ben,
Thanks a lot for the info.
Regards
Matheos