powerpc, keymile boards: extract identical config options
PATCH 5/5 powerpc, keymile boards: extract identical config options
This patch extracts the identical config options for the keymile boards mgcoge, mgsuvd and kmeter1 in a new common config file keymile-common.h.
Signed-off-by Heiko Schocher <[email protected]>
--- include/configs/keymile-common.h | 113 ++++++++++++++++++++++++++++++++++++++ include/configs/kmeter1.h | 82 +-------------------------- include/configs/mgcoge.h | 62 +-------------------- include/configs/mgsuvd.h | 82 +--------------------------- 4 files changed, 120 insertions(+), 219 deletions(-) create mode 100644 include/configs/keymile-common.h
include/configs/keymile-common.h new file +113 -0
@@ -0,0 +1,113 @@ +/* +* (C) Copyright 2008 +* Heiko Schocher, DENX Software Engineering, hs at denx.de. +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __CONFIG_KEYMILE_H +#define __CONFIG_KEYMILE_H + +/* Do boardspecific init for all boards */ +#define CONFIG_BOARD_EARLY_INIT_R 1 + +#if defined(CONFIG_MGCOGE ) || defined(CONFIG_MGSUVD ) +#define CONFIG_BOOTCOUNT_LIMIT +#endif + +/* +* Command line configuration. +*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_IMMAP +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING + +/* should go away, if kmeter I2C support is enabled */ +#if defined(CONFIG_MGCOGE ) || defined(CONFIG_MGSUVD ) +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#endif + +#undef CONFIG_WATCHDOG/* disable platform specific watchdog */ + +#define CONFIG_BOOTCOMMAND "run net_nfs" +#define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */ +#undef CONFIG_BOOTARGS/* the boot command will set bootargs */ + +/* +* Miscellaneous configurable options +*/ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> "/* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB ) +#define CONFIG_SYS_CBSIZE 1024/* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)/* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16/* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_CMDLINE_EDITING 1/* add command line history */ + +/* should go away, if kmeter I2C support is enabled */ +#if defined(CONFIG_MGCOGE ) || defined(CONFIG_MGSUVD ) +#define CONFIG_HUSH_INIT_VAR 1 +#endif + +#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */ +#define CONFIG_SYS_MEMTEST_START 0x00100000/* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000/* 1 ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000/* default load address */ + +#define CONFIG_SYS_HZ 1000/* decrementer freq: 1 ms ticks */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_LOADS_ECHO 1/* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1/* allow baudrate change */ + +/* +* How to get access to the slot ID. Put this here to make it easy +* to modify in a centralized location. This is used in the HDLC +* driver to set the MAC. +*/ +#define CONFIG_CHECK_ETHERNET_PRESENT 1 +#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_PIGGY_BASE +#define CONFIG_SYS_SLOT_ID_OFF (0x07)/* register offset */ +#define CONFIG_SYS_SLOT_ID_MASK (0x3f)/* mask for slot ID bits */ + +/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +#endif /* __CONFIG_KEYMILE_H */
include/configs/kmeter1.h +3 -79
140 lines not on this page · raw message
include/configs/mgcoge.h +2 -60
84 lines not on this page · raw message
include/configs/mgsuvd.h +2 -80
119 lines not on this page · raw message
Signature · 5 lines
1.5.6.1 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany