Strange behavior since commit 5fef0e5c
In testing kernel version 2.6.28-rc4 on my server that was running kernel 2.6.27, an external IDE disk system connected via a PCCard interface failed to start because module ide_disk would not load. The console output is as follows:
finger@sonylap:~> sudo modprobe -v ide-disk
WARNING: module 'ide_gd_mod' is unsupported
FATAL: Module ide_disk not found.
I did not bisect this problem, but I believe that the following commit introduced this change:
commit 5fef0e5c0283949f95a7891c9424a9f84448116b
Author: Bartlomiej Zolnierkiewicz <[email protected]> Date: Fri Oct 17 18:09:12 2008 +0200
My work-around has been to change 'modprobe ide-disk' to 'modprobe ide-gd_mod' in my startup. Please note that one of the underscores is changed to a hyphen.
Thanks,
Larry
Quoted 7 lines · Larry Finger
In testing kernel version 2.6.28-rc4 on my server that was running kernel 2.6.27, an external IDE disk system connected via a PCCard interface failed to start because module
ide_diskwould not load. The console output is as follows:finger@sonylap:~> sudo modprobe -v ide-disk
WARNING: module 'ide_gd_mod' is unsupported
FATAL: Moduleide_disknot found.
Please verify that your system uses a recent module-init-tools version and then repeat 'make modules' + 'make modules_install' (it could be that something went wrong previously during installing modules) as it works just fine for me with 2.6.28-rc3 and module-init-tools 3.4.
Thanks,
Bart
Quoted 5 lines · Bartlomiej Zolnierkiewicz
Quoted 4 lines · Larry Finger
In testing kernel version 2.6.28-rc4 on my server that was running kernel 2.6.27, an external IDE disk system connected via a PCCard interface failed to start because module
ide_diskwould not load. The console output is as follows:
Quoted 8 lines
Quoted 3 lines
finger@sonylap:~> sudo modprobe -v ide-disk
WARNING: module 'ide_gd_mod' is unsupported
FATAL: Moduleide_disknot found.Please verify that your system uses a recent module-init-tools version and then repeat 'make modules' + 'make
modules_install' (it could be that something went wrong previously during installing modules) as it works just fine for me with 2.6.28-rc3 and module-init-tools 3.4.
That was the problem. I had 3.3 pre11, which was installed by openSUSE 10.3. Updating to version 3.4 fixed the problem. Thanks.
Should the requirement in Documentation/Changes be modified, or is that info no longer used?
Larry
Quoted 15 lines · On Fri, 14 Nov 2008 15:26:17 -0600 Larry Finger wrote:
Quoted 5 lines · Bartlomiej Zolnierkiewicz
Quoted 4 lines · Larry Finger
In testing kernel version 2.6.28-rc4 on my server that was running kernel 2.6.27, an external IDE disk system connected via a PCCard interface failed to start because module
ide_diskwould not load. The console output is as follows:Quoted 8 lines
Quoted 3 lines
finger@sonylap:~> sudo modprobe -v ide-disk
WARNING: module 'ide_gd_mod' is unsupported
FATAL: Moduleide_disknot found.Please verify that your system uses a recent module-init-tools version and then repeat 'make modules' + 'make
modules_install' (it could be that something went wrong previously during installing modules) as it works just fine for me with 2.6.28-rc3 and module-init-tools 3.4.
Quoted 5 lines
That was the problem. I had 3.3 pre11, which was installed by openSUSE 10.3. Updating to version 3.4 fixed the problem. Thanks.
Should the requirement in
Documentation/Changesbe modified, or is that info no longer used?
IMO it should be updated (or deleted if it's really useless).
---
~Randy