powerpc: 83xx: add support for the kmeter1 board

PATCH New Heiko Schocher 3 participants 4 messages Nov 20, 2008 – Jan 23, 2009 Kbuild

lore

Share & tools

lore

Heiko Schocher

author

2008-11-20 08:57 UTC #0 lore raw

PATCH v3 2/4 powerpc: 83xx: add support for the kmeter1 board

This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU.

- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700

Signed-off-by Heiko Schocher <[email protected]>

---

changes since v2:

added comments from Kim Philips
added doc/README.kmeter1

 MAINTAINERS                     |    1 +
 MAKEALL                         |    1 +
 Makefile                        |    3 +
 board/keymile/kmeter1/Makefile  |   51 ++++
 board/keymile/kmeter1/config.mk |   24 ++
 board/keymile/kmeter1/kmeter1.c |  153 ++++++++++++
 doc/README.kmeter1              |   91 +++++++
 include/configs/kmeter1.h       |  523 +++++++++++++++++++++++++++++++++++++++
 8 files changed, 847 insertions(+), 0 deletions(-)
 create mode 100644 board/keymile/kmeter1/Makefile
 create mode 100644 board/keymile/kmeter1/config.mk
 create mode 100644 board/keymile/kmeter1/kmeter1.c
 create mode 100644 doc/README.kmeter1
 create mode 100644 include/configs/kmeter1.h

MAINTAINERS +1 -0

index 127604b..4086831 100644
@@ -374,6 +374,7 @@ Heiko Schocher <[email protected]>
 
 	ids8247		MPC8247
 	jupiter		MPC5200
+	kmeter1		MPC8360
 	mgcoge		MPC8247
 	mgsuvd		MPC852
 	mucmc52		MPC5200

MAKEALL +1 -0

index dbed268..a4e38ce 100755
@@ -326,6 +326,7 @@ LIST_8260="		\
 #########################################################################
 
 LIST_83xx="		\
+	kmeter1		\
 	MPC8313ERDB_33	\
 	MPC8313ERDB_NAND_66	\
 	MPC8315ERDB	\

Makefile +3 -0

index fd521b6..1fe8f70 100644
@@ -2175,6 +2175,9 @@ TASREG_config :		unconfig
 ## MPC83xx Systems
 #########################################################################
 
+kmeter1_config: unconfig
+	@$(MKCONFIG) kmeter1 ppc mpc83xx kmeter1 keymile
+
 MPC8313ERDB_33_config \
 MPC8313ERDB_66_config \
 MPC8313ERDB_NAND_33_config \

board/keymile/kmeter1/Makefile new file +51 -0

51 lines not on this page · raw message

board/keymile/kmeter1/config.mk new file +24 -0

new file mode 100644
index 0000000..20f298b
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2008
+# Heiko Schocher, DENX Software Engineering, hs at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xF0000000

board/keymile/kmeter1/kmeter1.c new file +153 -0

153 lines not on this page · raw message

doc/README.kmeter1 new file +91 -0

91 lines not on this page · raw message

include/configs/kmeter1.h new file +523 -0

523 lines not on this page · raw message

Signature · 5 lines

1.5.6.1

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

Wolfgang Denk

Applied

2009-01-23 23:36 UTC #1 lore raw

PATCH v3 2/4 powerpc: 83xx: add support for the kmeter1 board

Dear Heiko Schocher,

Quoted 17 lines · In message <[email protected]> you wrote:

This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU.
- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700
Signed-off-by Heiko Schocher <[email protected]>
---
changes since v2:
added comments from Kim Philips
added doc/README.kmeter1

Quoted 14 lines

 MAINTAINERS                     |    1 +
 MAKEALL                         |    1 +
 Makefile                        |    3 +
 board/keymile/kmeter1/Makefile  |   51 ++++
 board/keymile/kmeter1/config.mk |   24 ++
 board/keymile/kmeter1/kmeter1.c |  153 ++++++++++++
 doc/README.kmeter1              |   91 +++++++
 include/configs/kmeter1.h       |  523 +++++++++++++++++++++++++++++++++++++++
 8 files changed, 847 insertions(+), 0 deletions(-)
 create mode 100644 board/keymile/kmeter1/Makefile
 create mode 100644 board/keymile/kmeter1/config.mk
 create mode 100644 board/keymile/kmeter1/kmeter1.c
 create mode 100644 doc/README.kmeter1
 create mode 100644 include/configs/kmeter1.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
News is what a chap who doesn't care much  about  anything  wants  to
read. And it's only news until he's read it. After that it's dead.
                           - Evelyn Waugh _Scoop_ (1938) bk. 1, ch. 5

Kim Phillips

2009-01-23 23:52 UTC #2 lore raw

PATCH v3 2/4 powerpc: 83xx: add support for the kmeter1 board

Quoted 35 lines · On Sat, 24 Jan 2009 00:36:34 +0100 Wolfgang Denk <[email protected]> wrote:

Dear Heiko Schocher,
Quoted 17 lines · In message <[email protected]> you wrote:
This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU.
- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700
Signed-off-by Heiko Schocher <[email protected]>
---
changes since v2:
added comments from Kim Philips
added doc/README.kmeter1
Quoted 14 lines
 MAINTAINERS                     |    1 +
 MAKEALL                         |    1 +
 Makefile                        |    3 +
 board/keymile/kmeter1/Makefile  |   51 ++++
 board/keymile/kmeter1/config.mk |   24 ++
 board/keymile/kmeter1/kmeter1.c |  153 ++++++++++++
 doc/README.kmeter1              |   91 +++++++
 include/configs/kmeter1.h       |  523 +++++++++++++++++++++++++++++++++++++++
 8 files changed, 847 insertions(+), 0 deletions(-)
 create mode 100644 board/keymile/kmeter1/Makefile
 create mode 100644 board/keymile/kmeter1/config.mk
 create mode 100644 board/keymile/kmeter1/kmeter1.c
 create mode 100644 doc/README.kmeter1
 create mode 100644 include/configs/kmeter1.h

Quoted 1 line

Applied, thanks.

eh? this is sitting in u-boot-mpc83xx.git next - I was going to ask you to pull soon.

Kim

Wolfgang Denk

2009-01-23 23:38 UTC #3 lore raw

PATCH v3 2/4 powerpc: 83xx: add support for the kmeter1 board

In reply to Heiko Schocher

Dear Kim,

Quoted 10 lines · In message <[email protected]> you wrote:

This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU.
- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700
Signed-off-by Heiko Schocher <[email protected]>

Oops. I applied this by accident as I misread the MPC8360 as a MPC8260 which would have been my job. Sorry. Hope you don't mind...

Best regards,

Wolfgang Denk

Signature · 6 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Roses are red
Violets are blue
Some poems rhyme