Add support for TQM-specific chip select logic to UPM-FSL
Subsystems (2)
PATCH 3/4 Add support for TQM-specific chip select logic to UPM-FSL
For the NAND chips on the TQM8548 modules, a special chip-select logic is used. It uses dedicated address lines to be controlled via UPM machine address register (mar). This patch adds corresponding support to the FSL-UPM driver.
Signed-off-by Wolfgang Grandegger <[email protected]>
--- drivers/mtd/nand/fsl_upm.c | 5 ++++- include/linux/mtd/fsl_upm.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)
drivers/mtd/nand/fsl_upm.c +4 -1
@@ -90,8 +90,11 @@ static void fun_cmd_ctrl(struct mtd_info mar = cmd << (32 - fun->width); io_addr = fun->upm.io_addr;#if NAND_MAX_CHIPS >1 -if (fun->chip_nr >0 ) +if (fun->chip_nr >0 ) { io_addr += fun->chip_offset * fun->chip_nr; +if (fun->upm_mar_chip_offset) + mar |= fun->upm_mar_chip_offset * fun->chip_nr; + }#endif fsl_upm_run_pattern (&fun->upm, fun->width, io_addr, mar);
include/linux/mtd/fsl_upm.h +1 -0
@@ -28,6 +28,7 @@ struct fsl_upm_nand {int width;int upm_cmd_offset;int upm_addr_offset; +int upm_mar_chip_offset;int wait_pattern;int (*dev_ready)(int chip_nr);int chip_delay;