mpc83xx, i2c: add mux support for fsl_i2c
PATCH 17/31 mpc83xx, i2c: add mux support for fsl_i2c
Signed-off-by Heiko Schocher <[email protected]>
--- drivers/i2c/fsl_i2c.c | 24 +++++++++++++++++++++++- 1 files changed, 23 insertions(+), 1 deletions(-)
drivers/i2c/fsl_i2c.c +23 -1
@@ -42,6 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;#define CONFIG_SYS_SPD_BUS_NUM 0#endif static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM; +static unsigned int i2c_bus_num_mux __attribute__ ((section ("data"))) = 0;static unsigned int i2c_bus_speed[2 ] = {CONFIG_SYS_I2C_SPEED ,CONFIG_SYS_I2C_SPEED };
@@ -369,6 +370,23 @@ i2c_probe(uchar chip)int i2c_set_bus_num (unsigned int bus) { +#if defined(CONFIG_I2C_MUX) + if (bus < CONFIG_SYS_MAX_I2C_BUS) { + i2c_bus_num = bus; + } else { + int ret; + + ret = i2x_mux_select_mux(bus); + if (ret == 0) { + /* with CONFIG_I2C_MUX only I2C Controller 1 + * is usable + */ + i2c_bus_num = 0; + i2c_bus_num_mux = bus; + } else + return ret; + } +#else #ifdef CONFIG_SYS_I2C2_OFFSET if (bus > 1) { #else
@@ -378,7 +396,7 @@ int i2c_set_bus_num(unsigned int bus) } i2c_bus_num = bus; - +#endif return 0 ; }
@@ -396,7 +414,11 @@ int i2c_set_bus_speed(unsigned int speed)unsigned int i2c_get_bus_num (void ) { +#if defined(CONFIG_I2C_MUX ) +return i2c_bus_num_mux; +#else return i2c_bus_num; +#endif }unsigned int i2c_get_bus_speed (void )
Signature · 5 lines
1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany