Skip to content

updates for keymile boards

Heiko Schocher u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest31 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/31powerpc: 8xx serial: add configurable SMC Rx buffer lencpu/mpc8xx/serial.c include/configs/mgsuvd.h+65 -380 replies
2/31environment, netconsole: reducing packages when printing environment variablescommon/cmd_nvedit.c include/configs/mgcoge.h include/configs/mgsuvd.h+10 -01 reply
2/31environment, netconsole: reducing packages when printing environment variables+0 -03 replies
3/31netloop: speed up NetLoopcommon/cmd_nvedit.c include/common.h net/eth.c +1 more+63 -432 replies
3/31netloop: speed up NetLoop+0 -00 replies
3/31netloop: speed up NetLoop+0 -00 replies
4/31powerpc: 82xx serial: add configurable SMC Rx buffer lencpu/mpc8260/serial_smc.c include/configs/mgcoge.h+64 -311 reply
4/31powerpc: 82xx serial: add configurable SMC Rx buffer len+0 -01 reply
5/31powerpc: extract common config options for keymile boards.include/configs/keymile-common.h include/configs/kmeter1.h include/configs/mgcoge.h +1 more+141 -1010 replies
6/31mpc82xx, mgcoge: add CS4 on mgcogeinclude/configs/mgcoge.h+12 -00 replies
7/31mpc83xx kmeter1: change some register settingsinclude/configs/kmeter1.h+14 -111 reply
7/31mpc83xx kmeter1: change some register settings+0 -00 replies
8/31powerpc, keymile boards: added cmdline featureinclude/configs/keymile-common.h+2 -01 reply
9/31powerpc: mgcoge, mgsuvd: RxBuffer for serial input increased to 128 byteinclude/configs/mgcoge.h include/configs/mgsuvd.h+2 -21 reply
9/31powerpc: mgcoge, mgsuvd: RxBuffer for serial input increased to 128 byte+0 -01 reply
10/318xx, mgsuvd: size and position of environment correctedinclude/configs/mgsuvd.h+3 -31 reply
10/318xx, mgsuvd: size and position of environment corrected+0 -01 reply
11/31powerpc, mgcoge, mgsuvd: MTD feature activated, partitions setinclude/configs/keymile-common.h include/configs/mgcoge.h include/configs/mgsuvd.h+16 -40 replies
12/3182xx, mgcoge: corrected wrong flash sizesinclude/configs/mgcoge.h+2 -21 reply
12/3182xx, mgcoge: corrected wrong flash sizes+0 -00 replies
13/31powerpc: mgcoge, mgsuvd: move IVM feature config to keymile-common.hinclude/configs/keymile-common.h include/configs/mgcoge.h include/configs/mgsuvd.h+22 -360 replies
14/31powerpc: mgcoge, mgsuvd: make some definitions in keymile-common.h conditionalinclude/configs/keymile-common.h include/configs/mgcoge.h include/configs/mgsuvd.h+30 -50 replies
15/31powerpc: keymile boards: conditional definition of a private env partinclude/configs/keymile-common.h+7 -10 replies
16/31dtt: call dtt_init () conditional in init_sequenceinclude/dtt.h+2 -01 reply
17/31mpc83xx, i2c: add mux support for fsl_i2cdrivers/i2c/fsl_i2c.c+23 -10 replies
18/31mpc83xx, kmeter1: add I2C, dtt, eeprom supportboard/keymile/common/common.c board/keymile/kmeter1/kmeter1.c include/configs/keymile-common.h +1 more+73 -61 reply
18/31mpc83xx, kmeter1: add I2C, dtt, eeprom support+0 -00 replies
19/31i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2cboard/keymile/common/common.c drivers/i2c/fsl_i2c.c include/configs/kmeter1.h+21 -01 reply
19/31i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c+0 -01 reply
19/31i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c+0 -01 reply
20/31mpc83xx, kmeter1: extract common I2C options in keymile headerinclude/configs/keymile-common.h include/configs/kmeter1.h+4 -231 reply
20/31mpc83xx, kmeter1: extract common I2C options in keymile header+0 -00 replies
21/31mpc83xx, kmeter1: autodetect size of DDR II Ram.board/keymile/kmeter1/kmeter1.c include/configs/kmeter1.h+23 -121 reply
21/31mpc83xx, kmeter1: autodetect size of DDR II Ram.+0 -00 replies
22/31mpc83xx, kmeter1, mtd: set the default partition tableinclude/configs/kmeter1.h+9 -02 replies
22/31mpc83xx, kmeter1, mtd: set the default partition table+0 -00 replies
23/31powerpc: mgcoge, mgsuvd, kmeter1: activate pram data areainclude/configs/keymile-common.h include/configs/kmeter1.h include/configs/mgcoge.h +1 more+19 -70 replies
24/31mgcoge, mgsuvd, kmeter1: removed double env paramsinclude/configs/keymile-common.h+0 -20 replies
25/31powerpc: mgcoge, mgsuvd, kmeter1: board Id parametersinclude/configs/keymile-common.h+4 -20 replies
26/31powerpc: mgcoge, mgsuvd, kmeter1: dont print errormsg if second IVM Block lacks..board/keymile/common/common.c+4 -31 reply
27/318xx, mgsuvd: rename board to a more generic nameMakefile board/keymile/km8xx/Makefile board/keymile/km8xx/config.mk +4 more+7 -41 reply
28/318xx: add support for new keymile kmsupx4 board.Makefile board/keymile/common/common.c board/keymile/km8xx/km8xx.c +7 more+73 -181 reply
28/318xx: add support for new keymile kmsupx4 board.+0 -00 replies
29/318xx, kmsupx4: add bootcount supportinclude/configs/keymile-common.h include/configs/km8xx.h+2 -40 replies
30/318xx, km8xx: update in dts node "flash", the reg value correct.board/keymile/km8xx/km8xx.c+5 -01 reply
31/3183xx, kmeter1: added bootcount featurecpu/mpc83xx/cpu.c include/configs/keymile-common.h+27 -21 reply
31/3183xx, kmeter1: added bootcount feature+0 -02 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 00/31] updates for keymile boards

following Patch series makes a lot of updates for the existing keymile boards mgsuvd, mgcoge and kmeter1. Also they add a new board from this manufacturer based on a MPC852T.

Heiko Schocher (31):
powerpc: 8xx serial: add configurable SMC Rx buffer len environment, netconsole: reducing packages when printing environment variables
netloop: speed up NetLoop
powerpc: 82xx serial: add configurable SMC Rx buffer len
powerpc: extract common config options for keymile boards.
mpc82xx, mgcoge: add CS4 on mgcoge
mpc83xx kmeter1: change some register settings
powerpc, keymile boards: added cmdline feature
powerpc: mgcoge, mgsuvd: RxBuffer for serial input increased to 128 byte 8xx, mgsuvd: size and position of environment corrected
powerpc, mgcoge, mgsuvd: MTD feature activated, partitions set 82xx, mgcoge: corrected wrong flash sizes
powerpc: mgcoge, mgsuvd: move IVM feature config to keymile-common.h
powerpc: mgcoge, mgsuvd: make some definitions in keymile-common.h conditional
powerpc: keymile boards: conditional definition of a private env part
dtt: call dtt_init () conditional in init_sequence
mpc83xx, i2c: add mux support for fsl_i2c
mpc83xx, kmeter1: add I2C, dtt, eeprom support
i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c
mpc83xx, kmeter1: extract common I2C options in keymile header mpc83xx, kmeter1: autodetect size of DDR II Ram.
mpc83xx, kmeter1, mtd: set the default partition table
powerpc: mgcoge, mgsuvd, kmeter1: activate pram data area
mgcoge, mgsuvd, kmeter1: removed double env params
powerpc: mgcoge, mgsuvd, kmeter1: board Id parameters
powerpc: mgcoge, mgsuvd, kmeter1: dont print errormsg if second IVM Block lacks.. 8xx, mgsuvd: rename board to a more generic name
8xx: add support for new keymile kmsupx4 board.
8xx, kmsupx4: add bootcount support
8xx, km8xx: update in dts node "flash", the reg value correct. 83xx, kmeter1: added bootcount feature

 Makefile                                           |   15 ++-
 board/keymile/common/common.c                      |   31 +++-
 board/keymile/{mgsuvd => km8xx}/Makefile           |    2 +-
 board/keymile/{mgsuvd => km8xx}/config.mk          |    0
 board/keymile/{mgsuvd/mgsuvd.c => km8xx/km8xx.c}   |   12 ++-
 .../mgsuvd_hdlc_enet.c => km8xx/km8xx_hdlc_enet.c} |    0
 board/keymile/{mgsuvd => km8xx}/u-boot.lds         |    0
 board/keymile/kmeter1/kmeter1.c                    |   63 +++++++--
 common/cmd_nvedit.c                                |   14 ++
 cpu/mpc8260/serial_smc.c                           |   94 ++++++++----
 cpu/mpc83xx/cpu.c                                  |   27 ++++
 cpu/mpc8xx/cpu_init.c                              |    2 +
 cpu/mpc8xx/serial.c                                |  102 ++++++++-----
 cpu/mpc8xx/start.S                                 |    3 +-
 drivers/i2c/fsl_i2c.c                              |   30 ++++-
 drivers/i2c/soft_i2c.c                             |    3 +
 include/common.h                                   |    1 +
 include/commproc.h                                 |    2 +-
 include/configs/keymile-common.h                   |  162 ++++++++++++++++++--
 include/configs/{mgsuvd.h => km8xx.h}              |  127 ++++++++-------
 include/configs/kmeter1.h                          |  118 ++++++++-------
 include/configs/mgcoge.h                           |   98 ++++++-------
 include/dtt.h                                      |    2 +
 lib_ppc/board.c                                    |    3 +-
 net/eth.c                                          |   11 +-
 net/net.c                                          |   88 ++++++-----
 26 files changed, 699 insertions(+), 311 deletions(-)
 rename board/keymile/{mgsuvd => km8xx}/Makefile (98%)
 rename board/keymile/{mgsuvd => km8xx}/config.mk (100%)
 rename board/keymile/{mgsuvd/mgsuvd.c => km8xx/km8xx.c} (95%)
 rename board/keymile/{mgsuvd/mgsuvd_hdlc_enet.c => km8xx/km8xx_hdlc_enet.c} (100%)
 rename board/keymile/{mgsuvd => km8xx}/u-boot.lds (100%)
 rename include/configs/{mgsuvd.h => km8xx.h} (79%)
Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany