8xx, icache: enabling ICache not before running from RAM
PATCH v2 2/6 8xx, icache: enabling ICache not before running from RAM
with the new CONFIG_SYS_DELAYED_ICACHE config option, ICache is not enabled before code runs from RAM.
Signed-off-by Heiko Schocher <[email protected]>
--- README | 5 +++++ cpu/mpc8xx/start.S | 2 +- include/configs/FLAGADM.h | 3 +++ include/configs/IP860.h | 3 +++ include/configs/pcu_e.h | 3 +++ lib_ppc/board.c | 3 +-- 6 files changed, 16 insertions(+), 3 deletions(-)
README +5 -0
@@ -318,6 +318,11 @@ The following options need to be configured: that this requires a (stable) reference clock (32 kHz RTC clock or CONFIG_SYS_8XX_XIN) + CONFIG_SYS_DELAYED_ICACHE + + Define this option if you want to enable the + ICache only when Code runs from RAM. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
cpu/mpc8xx/start.S +1 -1
@@ -142,7 +142,7 @@ boot_warm: lis r3, IDC_DISABLE at h /* Disable data cache */ mtspr DC_CST, r3 -#if !(defined(CONFIG_IP860) || defined(CONFIG_PCU_E) || defined (CONFIG_FLAGADM)) +#if !defined(CONFIG_SYS_DELAYED_ICACHE) /* On IP860 and PCU E, * we cannot enable IC yet */
include/configs/FLAGADM.h +3 -0
@@ -173,6 +173,9 @@#if defined(CONFIG_CMD_KGDB )#define CONFIG_SYS_CACHELINE_SHIFT 4/* log base 2 of the above value */ #endif +#define CONFIG_SYS_DELAYED_ICACHE 1/* enable ICache not before +* running in RAM. +*/ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9
include/configs/IP860.h +3 -0
@@ -209,6 +209,9 @@#if defined(CONFIG_CMD_KGDB )#define CONFIG_SYS_CACHELINE_SHIFT 4/* log base 2 of the above value */ #endif +#define CONFIG_SYS_DELAYED_ICACHE 1/* enable ICache not before +* running in RAM. +*/ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9
include/configs/pcu_e.h +3 -0
@@ -246,6 +246,9 @@*/ #define CONFIG_SYS_CACHELINE_SIZE 16/* For all MPC8xx CPUs */ #define CONFIG_SYS_CACHELINE_SHIFT 4/* log base 2 of the above value */ +#define CONFIG_SYS_DELAYED_ICACHE 1/* enable ICache not before +* running in RAM. +*/ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9
lib_ppc/board.c +1 -2
@@ -736,8 +736,7 @@ void board_init_r (gd_t *id, ulong dest_addr)WATCHDOG_RESET (); -#if defined(CONFIG_IP860 ) || defined(CONFIG_PCU_E ) || \ - defined (CONFIG_FLAGADM ) || defined(CONFIG_MPC83XX ) +#if defined(CONFIG_SYS_DELAYED_ICACHE ) || defined(CONFIG_MPC83XX )icache_enable ();/* it's time to enable the instruction cache */ #endif
Signature · 5 lines
1.6.0.6 -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Wolfgang Denk
AppliedPATCH v2 2/6 8xx, icache: enabling ICache not before running from RAM
Dear Heiko Schocher,
Quoted 4 lines · In message <[email protected]> you wrote:
with the new
CONFIG_SYS_DELAYED_ICACHEconfig option, ICache is not enabled before code runs from RAM.Signed-off-by Heiko Schocher <[email protected]>
Quoted 8 lines
--- README | 5 +++++ cpu/mpc8xx/start.S | 2 +- include/configs/FLAGADM.h | 3 +++ include/configs/IP860.h | 3 +++ include/configs/pcu_e.h | 3 +++ lib_ppc/board.c | 3 +-- 6 files changed, 16 insertions(+), 3 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are no data that cannot be plotted on a straight line if the axis are chosen correctly.