U-Boot on Xilinx Virtex platforms
Hi,
I'm new to Xilinx world, so please bare with my ignorance.
Looking at u-boot Xilinx files I see that u-boot does not perform SDRAM initialization. SDRAM is apparently initialized by FPGA code. Is that correct ?
Another question is whether u-boot on Virtex can start executing from NOR flash or should be copied to SDRAM by some first level bootloader ?
Thanks a lot.
Felix.
Quoted 7 lines · Felix Radensky
Hi,
I'm new to Xilinx world, so please bare with my ignorance.
Looking at u-boot Xilinx files I see that u-boot does not perform SDRAM initialization. SDRAM is apparently initialized by FPGA code. Is that correct ?
Usually, yes.
Quoted 3 lines
Another question is whether u-boot on Virtex can start executing from NOR flash or should be copied to SDRAM by some first level bootloader ?
Yes. Either method works.
g.
Signature · 2 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.