Skip to contentSkip to conversation

U-Boot on Xilinx Virtex platforms

U-Boot Felix Radensky 2 participants 2 messages May 6, 2009 – May 7, 2009

lore
Share & tools
lore
#0 lore raw

Hi,

I'm new to Xilinx world, so please bare with my ignorance.

Looking at u-boot Xilinx files I see that u-boot does not perform SDRAM initialization. SDRAM is apparently initialized by FPGA code. Is that correct ?

Another question is whether u-boot on Virtex can start executing from NOR flash or should be copied to SDRAM by some first level bootloader ?

Thanks a lot.

Felix.

#1 lore raw
Quoted 7 lines · Felix Radensky

Hi,

I'm new to Xilinx world, so please bare with my ignorance.

Looking at u-boot Xilinx files I see that u-boot does not perform SDRAM initialization. SDRAM is apparently initialized by FPGA code. Is that correct ?

Usually, yes.

Quoted 3 lines

Another question is whether u-boot on Virtex can start executing from NOR flash or should be copied to SDRAM by some first level bootloader ?

Yes. Either method works.

g.

Signature · 2 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.