Skip to contentSkip to conversation

Interrupts in uboot with ARM AT91SAM9 (V2)

U-Boot Manuel Sahm 1 participant 1 message Sep 14, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

I?ve already inserted the following code:

In at91sam9g20ek.c:

void thread_test(void)
{
printf("RESET via INT\n");
}

in function :static void at91sam9g20ek_macb_hw_init (void) {
.......

at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | AT91_RSTC_URSTIEN); // Reset Bit AT91_RSTC_URSTS at91_sys_read(AT91_RSTC_SR);

at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); at91_sys_write(AT91_AIC_IDCR, 0x01 << AT91_ID_SYS); at91_sys_write(AT91_AIC_SVR(AT91_ID_SYS), (unsigned int)thread_test); at91_sys_write(AT91_AIC_SMR(AT91_ID_SYS), 5 | AT91_AIC_SRCTYPE_LOW); at91_sys_write(AT91_AIC_ICCR, 0x01 << AT91_ID_SYS); at91_sys_write(AT91_AIC_IECR, 0x01 << AT91_ID_SYS);

.....
}

if I trigger my interrupt - the system hangs....nothing is printed on
screen and I can?t enter anything in the prompt ?

Anything else that I have to add ???

Thanks very much...
Manuel

Quoted 1 line
Quoted 1 line
Quoted 1 line

Jean-Christophe PLAGNIOL-VILLARD <[email protected]> 05.09.2009

02:49 >>>

Quoted 5 lines · Manuel Sahm

Hello,

I have to use interrupts in UBoot 1.3.4 - how could I enable them ?

I have an AT91SAM9G20 - in ist header file I enable CONFIG_USE_IRQ

und

Quoted 7 lines

uncomment the lines#ifdefc CONFIG_USE_IRQ #error .... #endif. I inserted the lines:
#define CONFIG_STACKSIZE_IRQ (4*1024)
#define CONFIG_STACKSIZE_FIQ (4*1024)

In the file (/lib_amr/interrupts.c) I have to insert a function

called

Quoted 11 lines

do_irq().
I inserted:

void do_irq(struct pt_regs* pt_regs)
{
printf("interrupt request\n");
show_regs(pt_regs);
bad_mode();
}

When UBOOT starts all seems to be OK, but if I trigger my interrupt

-

Quoted 4 lines

the system hangs....nothing is printed on screen anmd I can?t enter anything in the prompt ?

Could you please help me.... ?

you need to clear the interrupt and add the at91 interrupt controller to use it

Best Regards,
J.
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot