ARM: NUC900: add RTC driver support for nuc910 and nuc920
PATCH v5 1/1 ARM: NUC900: add RTC driver support for nuc910 and nuc920
Dear Andrew,
Has that patch v4 been applied by you? due to I got the mail:
'+ arm-nuc900-add-rtc-driver-support-for-nuc910-and-nuc920.patch added to -mm tree'
Regarding your advice for 'check_rtc_power', I have modified some codes and thanks for your comment.
This patch named v5,and I fixed 'check_rtc_power' function, maybe I can make a patch relative to that patch v4?
Signed-off-by Wan ZongShun <[email protected]>
--- drivers/rtc/Kconfig | 6 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-nuc900.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 349 insertions(+), 0 deletions(-) create mode 100644 drivers/rtc/rtc-nuc900.c
drivers/rtc/Kconfig +6 -0
@@ -573,6 +573,12 @@ config RTC_DRV_AB3100 Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC support. This chip contains a battery- and capacitor-backed RTC. +config RTC_DRV_NUC900 + tristate "NUC910/NUC920 RTC driver" + depends on RTC_CLASS && ARCH_W90X900 + help + If you say yes here you get support for the RTC subsystem of the + NUC910/NUC920 used in embedded systems. comment "on-CPU RTC drivers"
drivers/rtc/Makefile +1 -0
@@ -53,6 +53,7 @@ obj-$(CONFIG_RTC_MXC) += rtc-mxc.o obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o +obj-$(CONFIG_RTC_DRV_NUC900) += rtc-nuc900.o obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCAP) += rtc-pcap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
drivers/rtc/rtc-nuc900.c new file +342 -0
342 lines not on this page · raw message
Signature · 1 line
1.5.6.3