2.6.33 on jetway nc81-lf board
Hello,
I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU. While trying to get lm_sensors to work I get in dmesg stuff like:
f71882fg: Found f71862fg chip at 0x220, revision 18
ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region IP__ [0x225-0x226]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
No other sensor-related modules are loaded.
What could be wrong?
# lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
# dmesg|grep -i acpi
BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
ACPI: RSDP 00000000000f83d0 00024 (v02 RS780 )
ACPI: XSDT 00000000bffe3080 0004C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000bffea480 000F4 (v03 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000bffe3200 0724B (v01 RS780 AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000bffe0000 00040
ACPI: SSDT 00000000bffea640 0095E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET 00000000bffeafc0 00038 (v01 RS780 AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG 00000000bffeb000 0003C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000bffea580 00084 (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10b9a201 base: 0xfed00000
ACPI: Core revision 20091214
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20091214/nspredef-1040)
ACPI: Expecting a [Reference] package element, found type 0
ACPI: Invalid passive threshold
ACPI: Thermal Zone [THRM] (40 C)
ACPI: Power Button [PWRB]
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region IP__ [0x225-0x226]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
(etc)
Udo
(cc lm-sensors)
Quoted 134 lines · On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel <[email protected]> wrote:
Hello,
I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU. While trying to get
lm_sensorsto work I get in dmesg stuff like:f71882fg: Found f71862fg chip at
0x220, revision 18
ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI regionIP__[0x225-0x226]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: I/O resourcepiix4_smbus[0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driverNo other sensor-related modules are loaded.
What could be wrong?
# lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)# dmesg|grep -i acpi
BIOS-e820:00000000bffe0000-00000000bffe3000(ACPI NVS)
BIOS-e820:00000000bffe3000-00000000bfff0000(ACPI data)
ACPI: RSDP00000000000f83d000024 (v02 RS780 )
ACPI: XSDT00000000bffe30800004C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP00000000bffea480000F4 (v03 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT00000000bffe32000724B (v01 RS780 AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS00000000bffe000000040
ACPI: SSDT00000000bffea6400095E (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: HPET00000000bffeafc000038 (v01 RS780 AWRDACPI 42302E31 AWRD 00000098)
ACPI: MCFG00000000bffeb0000003C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC00000000bffea58000084 (v01 RS780 AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address0xfee00000
ACPI: PM-Timer IO Port:0x4008
ACPI: Local APIC address0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI:LAPIC_NMI(acpi_id[0x00] high edge lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x01] high edge lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x02] high edge lint[0x1])
ACPI:LAPIC_NMI(acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
ACPI:INT_SRC_OVR(bus 0bus_irq0global_irq2 dfl dfl)
ACPI:INT_SRC_OVR(bus 0bus_irq9global_irq9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id:0x10b9a201base:0xfed00000
ACPI: Core revision 20091214
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)pci_rootPNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20091214/nspredef-1040)
ACPI: Expecting a [Reference] package element, found type 0
ACPI: Invalid passive threshold
ACPI: Thermal Zone [THRM] (40 C)
Quoted 9 lines
ACPI: Power Button [PWRB]
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI regionIP__[0x225-0x226]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
(etc)
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 5 lines · Andrew Morton
(cc lm-sensors)
Quoted 1 line · On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel <[email protected]> wrote:
Hello,
Hi,
Quoted 15 lines
Quoted 15 lines
I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU. While trying to get
lm_sensorsto work I get in dmesg stuff like:f71882fg: Found f71862fg chip at
0x220, revision 18
ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI regionIP__[0x225-0x226]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI: I/O resourcepiix4_smbus[0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Quoted 3 lines
Quoted 3 lines
No other sensor-related modules are loaded.
What could be wrong?
See lm-sensors FAQ Chapter3 #39:
http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
Regards,
Andre
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 4 lines · Andre Prendel
Quoted 3 lines · Andrew Morton
(cc lm-sensors)
On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel <[email protected]> wrote:
(....)
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
No other sensor-related modules are loaded.
What could be wrong?
See lm-sensors FAQ Chapter3 #39:
http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
Thanks, but the explanation implies no real fix other than more consciously choosing to put system stability at risk. Is a better fix in the making?
Kind regards,
Udo
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
Quoted 10 lines · Udo van den Heuvel
Quoted 4 lines · Andre Prendel
Quoted 3 lines · Andrew Morton
(cc lm-sensors)
On Mon, 01 Mar 2010 19:21:12 +0100 Udo van den Heuvel<[email protected]> wrote:
(....)
Quoted 4 lines
Quoted 3 lines
Quoted 3 lines
No other sensor-related modules are loaded.
What could be wrong?
Quoted 7 lines
Quoted 3 lines
See lm-sensors FAQ Chapter3 #39:
http://www.lm-sensors.org/wiki/FAQ/Chapter3#Mysensorshavestoppedworkinginkernel2.6.31
Thanks, but the explanation implies no real fix other than more consciously choosing to put system stability at risk. Is a better fix in the making?
I don't think a general fix is really possible at the kernel level. The problem is that there's no way for the kernel to tell for sure whether the BIOS AML or SMI code will attempt to access the sensor device. The fact that your BIOS defines AML operation regions that refer to the SMBus device is a hint that it may, but there's no programmatic way to tell for sure. If the kernel and BIOS end up attempting to poke the hardware monitoring chip at the same time, bad things are likely to happen (like ACPI thermal management not working properly causing overheating or critical shutdowns).
This problem isn't limited to Linux - loading software (at least that unapproved by the board manufacturer) on Windows that randomly pokes hardware sensors can cause similar problems if the BIOS attempts to access the same hardware.
The only real solution may be to check with the motherboard manufacturer to see if directly accessing the hardware sensors on that board is safe. (It's more likely to be OK on desktop machines than laptops, since they usually have less complex thermal/fan management, but there are no guarantees.)
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors