Skip to contentSkip to conversation

Query: NAND Flash support

U-Boot Mohamed Thalib H 3 participants 4 messages Apr 26, 2010 – Apr 27, 2010

lore
Share & tools
lore
#0 lore raw

Hi all,

We have NAND Flash in our Custom board. My Question is - will it work straight away, or I have add support.

If I need to add support. Could some one suggestion which part of the code should I touch.

We are using TI DM355 processor.

Thanks
Thalib

#1 lore raw
Quoted 12 lines · Mohamed Thalib H

Hi all,

We have NAND Flash in our Custom board. My Question is - will it work straight away, or I have add support.

If I need to add support. Could some one suggestion which part of the code should I touch.

We are using TI DM355 processor.

Hi Thalib,

You might check the nand platform driver, at drivers/mtd/nand/nand_plat.c. You should be able to add some simple macro to access the nand flash chip.

Cheers,
Thomas

#2 lore raw
In reply to Mohamed Thalib H
Quoted 5 lines

Hi all,

Quoted 8 lines

We have NAND Flash in our Custom board. My Question is - will it work straight away, or I have add support.

If I need to add support. Could some one suggestion which part of the code should I touch.

We are using TI DM355 processor.

DM355 support is present in U-Boot.
If you have not made any changes to the EMIF NAND on your board compared to the DM355 EVM, the NAND driver present in U-Boot will work.

If you have made changes then you might have to modify the DaVinci NAND driver, especially the ALE/CLE if they are different from the DM355 EVM.

Quoted 3 lines

Thanks
Thalib

#3 lore raw
Quoted 5 lines · Sandeep

DM355 support is present in U-Boot.
If you have not made any changes to the EMIF NAND on your board compared to the DM355 EVM, the NAND driver present in U-Boot will work.

If you have made changes then you might have to modify the DaVinci NAND driver, especially the ALE/CLE if they are different from the DM355 EVM.

Hi Sandeep and Thoma,

Thanks for the help.

Best Regards,
Mohamed Thalib H