Query: NAND Flash support
Hi all,
We have NAND Flash in our Custom board. My Question is - will it work straight away, or I have add support.
If I need to add support. Could some one suggestion which part of the code should I touch.
We are using TI DM355 processor.
Thanks
Thalib
Quoted 12 lines · Mohamed Thalib H
Hi all,
We have NAND Flash in our Custom board. My Question is - will it work straight away, or I have add support.
If I need to add support. Could some one suggestion which part of the code should I touch.
We are using TI DM355 processor.
Hi Thalib,
You might check the nand platform driver, at drivers/mtd/nand/nand_plat.c. You should be able to add some simple macro to access the nand flash chip.
Cheers,
Thomas
Paulraj
Quoted 5 lines
Hi all,
Quoted 8 lines
We have NAND Flash in our Custom board. My Question is - will it work straight away, or I have add support.
If I need to add support. Could some one suggestion which part of the code should I touch.
We are using TI DM355 processor.
DM355 support is present in U-Boot.
If you have not made any changes to the EMIF NAND on your board compared to the DM355 EVM, the NAND driver present in U-Boot will work.
If you have made changes then you might have to modify the DaVinci NAND driver, especially the ALE/CLE if they are different from the DM355 EVM.
Quoted 3 lines
Thanks
Thalib
Quoted 5 lines · Sandeep
DM355 support is present in U-Boot.
If you have not made any changes to the EMIF NAND on your board compared to the DM355 EVM, the NAND driver present in U-Boot will work.If you have made changes then you might have to modify the DaVinci NAND driver, especially the ALE/CLE if they are different from the DM355 EVM.
Hi Sandeep and Thoma,
Thanks for the help.
Best Regards,
Mohamed Thalib H