Pull Request

Dear Wolfgang,

The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Wolfgang Denk (1):

         Make sure that argv[] argument pointers are not modified.

are available in the git repository at:

git://git.denx.de/u-boot-nios.git next

Thomas Chou (6):
nios2: use gc sections to reduce image size
nios2: add fdt support
nios2: add gpio_request
gpio_led: add gpio_request to __led_init
nios2: add spi flash support to nios2-generic board
nios2: remove EP1C20, EP1S10, EP1S40 boards

  MAINTAINERS                              |    3 -
  MAKEALL                                  |    3 -
  arch/nios2/config.mk                     |    3 +
  arch/nios2/include/asm/gpio.h            |    6 +
  arch/nios2/lib/bootm.c                   |   21 +++
  board/altera/ep1c20/Makefile             |   55 --------
  board/altera/ep1c20/config.mk            |   31 -----
  board/altera/ep1c20/ep1c20.c             |   52 -------
  board/altera/ep1s10/Makefile             |   55 --------
  board/altera/ep1s10/config.mk            |   31 -----
  board/altera/ep1s10/ep1s10.c             |   52 -------
  board/altera/ep1s40/Makefile             |   55 --------
  board/altera/ep1s40/config.mk            |   31 -----
  board/altera/ep1s40/ep1s40.c             |   47 -------
  board/altera/nios2-generic/custom_fpga.h |   10 ++
  board/altera/nios2-generic/gpio.c        |    5 +
  boards.cfg                               |    3 -
  drivers/misc/gpio_led.c                  |   12 +-
  include/configs/EP1C20.h                 |  214 
------------------------------
  include/configs/EP1S10.h                 |  207 
-----------------------------
  include/configs/EP1S40.h                 |  207 
-----------------------------
  21 files changed, 49 insertions(+), 1054 deletions(-)

delete mode 100644 board/altera/ep1c20/Makefile delete mode 100644 board/altera/ep1c20/config.mk delete mode 100644 board/altera/ep1c20/ep1c20.c delete mode 100644 board/altera/ep1s10/Makefile delete mode 100644 board/altera/ep1s10/config.mk delete mode 100644 board/altera/ep1s10/ep1s10.c delete mode 100644 board/altera/ep1s40/Makefile delete mode 100644 board/altera/ep1s40/config.mk delete mode 100644 board/altera/ep1s40/ep1s40.c delete mode 100644 include/configs/EP1C20.h delete mode 100644 include/configs/EP1S10.h delete mode 100644 include/configs/EP1S40.h

Regards,
--Scott

Dear Scott McNutt,

Applied, thanks.

Best regards,

Wolfgang Denk

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Ja, mach' nur einen Plan,    sei nur ein grosses Licht
und mach' dann noch 'nen zweiten Plan,    geh'n tun sie beide nicht."
                                     -- Bert Brecht, Dreigroschenoper