ASoC: Add MAX98089 CODEC driver
PATCH 1/1 ASoC: Add MAX98089 CODEC driver
This patch adds the initial driver for the MAX98089 CODEC.
--- include/sound/max98089.h | 50 + sound/soc/codecs/Kconfig | 4 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/max98089.c | 2097 +++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/max98089.h | 193 ++++ 5 files changed, 2346 insertions(+), 0 deletions(-) create mode 100644 include/sound/max98089.h create mode 100644 sound/soc/codecs/max98089.c create mode 100644 sound/soc/codecs/max98089.h
include/sound/max98089.h new file +50 -0
@@ -0,0 +1,50 @@ +/* +* Platform data for MAX98089 +* +* Copyright 2010 Maxim Integrated Products +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +*/ + +#ifndef __SOUND_MAX98089_PDATA_H__ +#define __SOUND_MAX98089_PDATA_H__ + +/* Equalizer filter response configuration */ +struct max98089_eq_cfg { +const char *name; +unsigned int rate; +u16 band1[5 ]; +u16 band2[5 ]; +u16 band3[5 ]; +u16 band4[5 ]; +u16 band5[5 ]; +}; + +/* codec platform data */ +struct max98089_pdata { + +/* Equalizers for DAI1 and DAI2 */ +struct max98089_eq_cfg *eq_cfg; +unsigned int eq_cfgcnt; + +/* Receiver output can be configured as power amplifier or LINE out */ +/* Set receiver_mode to: +* 0 = amplifier output, or +* 1 = LINE level output +*/ +unsigned int receiver_mode:1 ; + +/* Analog/digital microphone configuration: +* 0 = analog microphone input (normal setting) +* 1 = digital microphone input +*/ +unsigned int digmic_left_mode:1 ; +unsigned int digmic_right_mode:1 ; + +}; + +#endif
sound/soc/codecs/Kconfig +4 -0
@@ -28,6 +28,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_DA7210 if I2C select SND_SOC_JZ4740 if SOC_JZ4740 select SND_SOC_MAX98088 if I2C + select SND_SOC_MAX98089 if I2C select SND_SOC_MAX9877 if I2C select SND_SOC_PCM3008 select SND_SOC_SPDIF
@@ -162,6 +163,9 @@ config SND_SOC_DA7210 config SND_SOC_MAX98088 tristate +config SND_SOC_MAX98089 + tristate + config SND_SOC_PCM3008 tristate
sound/soc/codecs/Makefile +2 -0
@@ -16,6 +16,7 @@ snd-soc-cx20442-objs := cx20442.o snd-soc-da7210-objs := da7210.o snd-soc-l3-objs := l3.o snd-soc-max98088-objs := max98088.o +snd-soc-max98089-objs := max98089.o snd-soc-pcm3008-objs := pcm3008.o snd-soc-spdif-objs := spdif_transciever.o snd-soc-ssm2602-objs := ssm2602.o
@@ -91,6 +92,7 @@ obj-$(CONFIG_SND_SOC_DA7210) += snd-soc-da7210.o obj-$(CONFIG_SND_SOC_L3) += snd-soc-l3.o obj-$(CONFIG_SND_SOC_JZ4740_CODEC) += snd-soc-jz4740-codec.o obj-$(CONFIG_SND_SOC_MAX98088) += snd-soc-max98088.o +obj-$(CONFIG_SND_SOC_MAX98089) += snd-soc-max98089.o obj-$(CONFIG_SND_SOC_PCM3008) += snd-soc-pcm3008.o obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif.o obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o
sound/soc/codecs/max98089.c new file +2097 -0
2,097 lines not on this page · raw message
sound/soc/codecs/max98089.h new file +193 -0
193 lines not on this page · raw message
Signature · 1 line
1.5.6.5
Quoted 1 line · Jesse Marroquin
This patch adds the initial driver for the MAX98089 CODEC.
I've not read this properly yet but on a first quick scan through this bears a more than passing resemblance to the MAX98088 driver - are there sufficient incompatibilities between the chips to warrant having a separate driver? http://datasheets.maxim-ic.com/en/ds/MAX98088.pdf
would suggest not...
Keeping a single driver means less code to maintain, which is generally a win. Variations between the parts can be accommodated by registering different controls and so on based on the I2C device ID that the system registers.
Thanks for pointing out the I2C device ID. After looking at the existing drivers that have multiple I2C IDs, I see that the devices can be uniquely identified. With this we should be able to accommodate both devices with the same driver.
Quoted 14 lines · Mark Brown
Quoted 1 line · Jesse Marroquin
This patch adds the initial driver for the MAX98089 CODEC.
I've not read this properly yet but on a first quick scan through this bears a more than passing resemblance to the MAX98088 driver - are there sufficient incompatibilities between the chips to warrant having a separate driver? http://datasheets.maxim-ic.com/en/ds/MAX98088.pdf
would suggest not...Keeping a single driver means less code to maintain, which is generally a win. Variations between the parts can be accommodated by registering different controls and so on based on the I2C device ID that the system registers.