AMD Bulldozer FX-8150 Powers off during kernel build
I have a huge heatsink and large CPU fan plus lots of cooling fans in the case and nothing gets hot. If I build e.g 3.6-rc5 with 8 or 6 cores, part way through it suddenly powers off.
I have checked hwmon/k10temp.c to see if I could see where these values were defined.
k10temp.h is 0 bytes.
-rw-r--r-- 1 root root 0 Sep 9 01:59 /usr/src/linux-3.6.0-rc5/include/config/sensors/k10temp.h
Currently I build with "make -j 1" and temperature and power values are around those below.
# sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +60.4°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 127.49 W (crit = 124.77 W)
# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 1 model name : AMD FX(tm)-8150 Eight-Core Processor stepping : 2 microcode : 0x6000626 cpu MHz : 3600.000 cache size : 2048 KB
from .config:-
# grep HWMON .config CONFIG_IXGBE_HWMON=y CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL_HWMON=y
# grep POWERSAVE .config # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_POWERSAVE=m # CONFIG_PCIEASPM_POWERSAVE is not set CONFIG_DEVFREQ_GOV_POWERSAVE=y
On another 6-core box I can build kernels with "make -j 6" without problems.
# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 1 model name : AMD FX(tm)-6100 Six-Core Processor stepping : 2 microcode : 0x6000623 cpu MHz : 3300.000 cache size : 2048 KB
With a kernel build going on six core box, temperature and power hover around the values below. sabre:~ # sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +50.2°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 94.40 W (crit = 95.01 W)
73 ... Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 4 lines · Sid Boyce
I have a huge heatsink and large CPU fan plus lots of cooling fans in the case and nothing gets hot.
If I build e.g 3.6-rc5 with 8 or 6 cores, part way through it suddenly powers off.
Ok, can you catch the whole dmesg when you boot the machine _after_ the sudden poweroff? You can send it to me and Andreas (on CC) privately if you prefer.
Important: make sure the kernel has CONFIG_X86_MCE and CONFIG_EDAC_DECODE_MCE built-in.
Please make sure to use a recent kernel, i.e. 3.4, 3.5 is fine.
Thanks.
(Leaving in the rest for reference)
Quoted 81 lines
I have checked
hwmon/k10temp.cto see if I could see where these values were defined.
k10temp.his 0 bytes.
-rw-r--r-- 1 root root 0 Sep 9 01:59/usr/src/linux-3.6.0-rc5/include/config/sensors/k10temp.hCurrently I build with "make -j 1" and temperature and power values are around those below.
# sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +60.4°C (high = +70.0°C) (crit = +90.0°C, hyst = +87.0°C)fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 127.49 W (crit = 124.77 W)# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 1 model name : AMD FX(tm)-8150 Eight-Core Processor stepping : 2 microcode : 0x6000626 cpu MHz : 3600.000 cache size : 2048 KBfrom .config:-
# grep HWMON .config CONFIG_IXGBE_HWMON=y CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL_HWMON=y# grep POWERSAVE .config # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_POWERSAVE=m # CONFIG_PCIEASPM_POWERSAVE is not set CONFIG_DEVFREQ_GOV_POWERSAVE=yOn another 6-core box I can build kernels with "make -j 6" without problems.
# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 1 model name : AMD FX(tm)-6100 Six-Core Processor stepping : 2 microcode : 0x6000623 cpu MHz : 3300.000 cache size : 2048 KBWith a kernel build going on six core box, temperature and power hover around the values below.
sabre:~ # sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +50.2°C (high = +70.0°C)(crit = +90.0°C, hyst = +87.0°C)fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 94.40 W (crit = 95.01 W)73 ... Sid.
Signature · 10 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
Regards/Gruss,
Boris.# uname -r 3.6.0-rc5-u1-smp+
I built a new 3.6-rc5 kernel (3.6.0-rc5-u2) using 3.6.0-rc5-u1 with 8 cores and power off didn't ocur. slipstream:/usr/src/linux-3.6.0-rc5-u1 # grep POWER .config
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not setCONFIG_CPU_FREQ_GOV_POWERSAVE=mCONFIG_X86_POWERNOW_K8=m
# CONFIG_PCIEASPM_POWERSAVE is not setCONFIG_INPUT_POWERMATE=mCONFIG_IPMI_POWEROFF=mCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=mCONFIG_TEST_POWER=mCONFIG_POWER_AVS=yCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_ACPI_POWER=mCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_HID_LCPOWER is not setCONFIG_DEVFREQ_GOV_POWERSAVE=yCONFIG_EVENT_POWER_TRACING_DEPRECATED=y
# CONFIG_XZ_DEC_POWERPC is not set
When it was powering off "CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y" was set. slipstream:/usr/src/linux-3.6.0-rc5-u1 # grep PERFORMANCE .config # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_PCIEASPM_PERFORMANCE=yCONFIG_DEVFREQ_GOV_PERFORMANCE=y
slipstream:/usr/src/linux-3.6.0-rc5-u1 # grep MCE .config CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_MCE_INJ is not set
During the build temperature and power was around these values
-------------------------------------------------------------------------------------
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 133.30 W (crit = 124.77 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +61.9°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
Immediately after the build the values are much lower than what it was with the kernel and config that caused the power off.
----------------------------------------
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 31.10 W (crit = 124.77 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +33.2°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
------------------------------------------
If needed I can go back to the earlier 3.6.0-rc5 kernel and config to recreate the power off situation. With the kernel that powered off, MCE was not set and CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
For the 3.6.0-rc5-u1 kernel only those 2 were changed. Regards
Sid.
Quoted 90 lines · Borislav Petkov
Quoted 4 lines · Sid Boyce
I have a huge heatsink and large CPU fan plus lots of cooling fans in the case and nothing gets hot.
If I build e.g 3.6-rc5 with 8 or 6 cores, part way through it suddenly powers off.Ok, can you catch the whole dmesg when you boot the machine _after_ the sudden poweroff? You can send it to me and Andreas (on CC) privately if you prefer.
Important: make sure the kernel has
CONFIG_X86_MCEandCONFIG_EDAC_DECODE_MCEbuilt-in.Please make sure to use a recent kernel, i.e. 3.4, 3.5 is fine.
Thanks.
(Leaving in the rest for reference)
Quoted 72 lines
I have checked
hwmon/k10temp.cto see if I could see where these values were defined.
k10temp.his 0 bytes.
-rw-r--r-- 1 root root 0 Sep 9 01:59/usr/src/linux-3.6.0-rc5/include/config/sensors/k10temp.hCurrently I build with "make -j 1" and temperature and power values are around those below.
# sensors k10temp-pci-00c3 Adapter: PCI adapter temp1: +60.4°C (high = +70.0°C) (crit = +90.0°C, hyst = +87.0°C)fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 127.49 W (crit = 124.77 W)# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 1 model name : AMD FX(tm)-8150 Eight-Core Processor stepping : 2 microcode : 0x6000626 cpu MHz : 3600.000 cache size : 2048 KBfrom .config:-
# grep HWMON .config CONFIG_IXGBE_HWMON=y CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL_HWMON=y# grep POWERSAVE .config # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set CONFIG_CPU_FREQ_GOV_POWERSAVE=m # CONFIG_PCIEASPM_POWERSAVE is not set CONFIG_DEVFREQ_GOV_POWERSAVE=yOn another 6-core box I can build kernels with "make -j 6" without problems.
# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 1 model name : AMD FX(tm)-6100 Six-Core Processor stepping : 2 microcode : 0x6000623 cpu MHz : 3300.000 cache size : 2048 KBWith a kernel build going on six core box, temperature and power hover around the values below.
sabre:~ # sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +50.2°C (high = +70.0°C)(crit = +90.0°C, hyst = +87.0°C)fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 94.40 W (crit = 95.01 W)73 ... Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Quoted 3 lines · Sid Boyce
If needed I can go back to the earlier 3.6.0-rc5 kernel and config to recreate the power off situation. With the kernel that powered off, MCE was not set and
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
Yes, as I suggested earlier, enable CONFIG_X86_MCE and CONFIG_EDAC_DECODE_MCE and *then* try recreating the reboot.
After it reboots, catch the whole dmesg and send it to me.
Thanks.
Signature · 2 lines
Regards/Gruss,
Boris.