WIP: Signing TI x509 certificates using binman
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].
Let me know your thoughts. The tree is also WIP, and was mainly designed for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.
[2] https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Signature · 2 lines
Thanking You Neha Malcom Francis
Hi Neha,
Quoted 11 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].
Let me know your thoughts. The tree is also WIP, and was mainly designed for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does. If most of the cert is the same, you could pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Anyway, apart from my questions it seems good.
Regards,
Simon
Hi Simon
Quoted 15 lines · Simon Glass
Hi Neha,
Quoted 11 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].
Let me know your thoughts. The tree is also WIP, and was mainly designed for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.
Quoted 7 lines
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does.
So you're suggesting to include the config creation within the openssl btool, am I right? For example methods to generate a config, add section to a config, add extension to a section of a config... etc? I can take a look at implementing this if this is what you have suggested.
If most of the cert is the same, you could
Quoted 3 lines
pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Did you mean YAML? If so in the patch I linked, I don't think I had a example for that. Could you point out what exactly you're asking about?
Quoted 3 lines
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
Yes, in the same github link I have the whole tree [3] that contains DTBs for couple of the devices [4] and [5], please have a look and let me know (I might force push a few changes in the next couple of days, so better to look from the tree)
Quoted 7 lines
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Yes, you're right. Will address that when sending the patch series completely.
Quoted 16 lines
Anyway, apart from my questions it seems good.
Regards,
Simon
[3] https://github.com/nehamalcom/u-boot/commits/ti-secure-functionality
[4] https://github.com/nehamalcom/u-boot/commit/dda1f9caf436df59c576466f35262df90aa1c0af
Signature · 2 lines
Thanking You Neha Malcom Francis
Hi Neha,
Quoted 27 lines · Neha Malcom Francis
Hi Simon
Quoted 15 lines · Simon Glass
Hi Neha,
Quoted 11 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].
Let me know your thoughts. The tree is also WIP, and was mainly designed for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.
Quoted 7 lines
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does.
Quoted 4 lines
So you're suggesting to include the config creation within the openssl btool, am I right? For example methods to generate a config, add section to a config, add extension to a section of a config... etc? I can take a look at implementing this if this is what you have suggested.
I am more thinking that your use case could be a new method in that file, with arguments that suit your case, but with common code to create a cert of the correct type. That means pulling out the existing cert creation into a new (internal) function in that btool that does both types of cert. For the CN args I think a dict would be suitable to pass in the settings.
I'm trying to avoid people passing in a cert every time, since that is going to create a lot of code duplication and it will be hard to take advantage of common algos.
Quoted 7 lines
If most of the cert is the same, you could
Quoted 3 lines
pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Did you mean YAML? If so in the patch I linked, I don't think I had a example for that. Could you point out what exactly you're asking about?
Well I am wondering why it is in the code...is there a yaml file that you need to ingest and process? What is it for?
...actually I see the yaml files in your tree mentioned below. Does this come out of some other tool?
Quoted 9 lines
Quoted 4 lines
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
Yes, in the same github link I have the whole tree [3] that contains DTBs for couple of the devices [4] and [5], please have a look and let me know (I might force push a few changes in the next couple of days, so better to look from the tree)
OK I see. Yes it looks pretty good to me.
Quoted 11 lines
Quoted 8 lines
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Yes, you're right. Will address that when sending the patch series completely.
OK
Quoted 14 lines
Quoted 14 lines
Anyway, apart from my questions it seems good.
Regards,
Simon
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
--
Thanking You
Neha Malcom Francis[3] https://github.com/nehamalcom/u-boot/commits/ti-secure-functionality
[4]
https://github.com/nehamalcom/u-boot/commit/dda1f9caf436df59c576466f35262df90aa1c0af
Regards,
Simon
Hi Simon
Quoted 42 lines · Simon Glass
Hi Neha,
Quoted 27 lines · Neha Malcom Francis
Hi Simon
Quoted 15 lines · Simon Glass
Hi Neha,
Quoted 11 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].
Let me know your thoughts. The tree is also WIP, and was mainly designed for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.
Quoted 7 lines
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does.
Quoted 4 lines
So you're suggesting to include the config creation within the openssl btool, am I right? For example methods to generate a config, add section to a config, add extension to a section of a config... etc? I can take a look at implementing this if this is what you have suggested.
I am more thinking that your use case could be a new method in that file, with arguments that suit your case, but with common code to create a cert of the correct type. That means pulling out the existing cert creation into a new (internal) function in that btool that does both types of cert. For the CN args I think a dict would be suitable to pass in the settings.
Quoted 4 lines
I'm trying to avoid people passing in a cert every time, since that is going to create a lot of code duplication and it will be hard to take advantage of common algos.
Okay I think I get it, let me respin with this in mind.
Quoted 5 lines
Quoted 5 lines
If most of the cert is the same, you could
Quoted 3 lines
pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Quoted 9 lines
Quoted 2 lines
Did you mean YAML? If so in the patch I linked, I don't think I had a example for that. Could you point out what exactly you're asking about?
Well I am wondering why it is in the code...is there a yaml file that you need to ingest and process? What is it for?
...actually I see the yaml files in your tree mentioned below. Does this come out of some other tool?
Right, so currently we have certain board specific configurations in YAML. This is input to our board configuration binary entry type [6], which converts YAML into binary blobs prepended with certain headers needed.
Quoted 44 lines
Quoted 9 lines
Quoted 4 lines
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
Yes, in the same github link I have the whole tree [3] that contains DTBs for couple of the devices [4] and [5], please have a look and let me know (I might force push a few changes in the next couple of days, so better to look from the tree)
OK I see. Yes it looks pretty good to me.
Quoted 11 lines
Quoted 8 lines
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Yes, you're right. Will address that when sending the patch series completely.
OK
Quoted 18 lines
Quoted 17 lines
Anyway, apart from my questions it seems good.
Regards,
Simon
Quoted 7 lines
Quoted 4 lines
[3] https://github.com/nehamalcom/u-boot/commits/ti-secure-functionality
[4]
https://github.com/nehamalcom/u-boot/commit/dda1f9caf436df59c576466f35262df90aa1c0afRegards,
Simon
[6] https://github.com/nehamalcom/u-boot/commit/3ca258562c374e553a7005a5b6d6441358801e78
Signature · 2 lines
Thanking You Neha Malcom Francis
Hi Simon
Quoted 45 lines · Neha Malcom Francis
Hi Simon
Quoted 42 lines · Simon Glass
Hi Neha,
Quoted 27 lines · Neha Malcom Francis
Hi Simon
Quoted 15 lines · Simon Glass
Hi Neha,
Quoted 11 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].
Let me know your thoughts. The tree is also WIP, and was mainly designed for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.
Quoted 7 lines
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does.
Quoted 4 lines
So you're suggesting to include the config creation within the openssl btool, am I right? For example methods to generate a config, add section to a config, add extension to a section of a config... etc? I can take a look at implementing this if this is what you have suggested.
I am more thinking that your use case could be a new method in that file, with arguments that suit your case, but with common code to create a cert of the correct type. That means pulling out the existing cert creation into a new (internal) function in that btool that does both types of cert. For the CN args I think a dict would be suitable to pass in the settings.
Quoted 6 lines
Quoted 4 lines
I'm trying to avoid people passing in a cert every time, since that is going to create a lot of code duplication and it will be hard to take advantage of common algos.
Okay I think I get it, let me respin with this in mind.
I am still a little doubtful about putting in *this* cert generation in the openssl btool. These sections and extensions are TI specific and I don't think there would be code duplication in future. The least code duplication along with functionality would be acheived by allowing creating configs, sections, extensions etc. in openssl btool or x509 etype. and then creating the final cert binary in openssl. What do you think?
Quoted 71 lines
Quoted 5 lines
Quoted 5 lines
If most of the cert is the same, you could
Quoted 3 lines
pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Quoted 9 lines
Quoted 2 lines
Did you mean YAML? If so in the patch I linked, I don't think I had a example for that. Could you point out what exactly you're asking about?
Well I am wondering why it is in the code...is there a yaml file that you need to ingest and process? What is it for?
...actually I see the yaml files in your tree mentioned below. Does this come out of some other tool?
Right, so currently we have certain board specific configurations in YAML. This is input to our board configuration binary entry type [6], which converts YAML into binary blobs prepended with certain headers needed.
Quoted 44 lines
Quoted 9 lines
Quoted 4 lines
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
Yes, in the same github link I have the whole tree [3] that contains DTBs for couple of the devices [4] and [5], please have a look and let me know (I might force push a few changes in the next couple of days, so better to look from the tree)
OK I see. Yes it looks pretty good to me.
Quoted 11 lines
Quoted 8 lines
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Yes, you're right. Will address that when sending the patch series completely.
OK
Quoted 18 lines
Quoted 17 lines
Anyway, apart from my questions it seems good.
Regards,
SimonQuoted 10 lines
[2]
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/Signature · 2 lines
Thanking You Neha Malcom FrancisQuoted 7 lines
Quoted 4 lines
[3] https://github.com/nehamalcom/u-boot/commits/ti-secure-functionality
[4]
https://github.com/nehamalcom/u-boot/commit/dda1f9caf436df59c576466f35262df90aa1c0afRegards,
Simon[6] https://github.com/nehamalcom/u-boot/commit/3ca258562c374e553a7005a5b6d6441358801e78
Signature · 2 lines
Thanking You Neha Malcom Francis
Hi Neha,
Quoted 60 lines · Neha Malcom Francis
Hi Simon
Quoted 49 lines · Neha Malcom Francis
Hi Simon
Quoted 46 lines · Simon Glass
Hi Neha,
Quoted 30 lines · Neha Malcom Francis
Hi Simon
Quoted 18 lines · Simon Glass
Hi Neha,
Quoted 9 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the
implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].Quoted 4 lines
Let me know your thoughts. The tree is also WIP, and was mainly designed
for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.Quoted 7 lines
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does.
Quoted 4 lines
So you're suggesting to include the config creation within the openssl btool, am I right? For example methods to generate a config, add section to a config, add extension to a section of a config... etc? I can take a look at implementing this if this is what you have suggested.
I am more thinking that your use case could be a new method in that file, with arguments that suit your case, but with common code to create a cert of the correct type. That means pulling out the existing cert creation into a new (internal) function in that btool that does both types of cert. For the CN args I think a dict would be suitable to pass in the settings.
Quoted 6 lines
Quoted 4 lines
I'm trying to avoid people passing in a cert every time, since that is going to create a lot of code duplication and it will be hard to take advantage of common algos.
Okay I think I get it, let me respin with this in mind.
Quoted 7 lines
I am still a little doubtful about putting in *this* cert generation in the openssl btool. These sections and extensions are TI specific and I don't think there would be code duplication in future. The least code duplication along with functionality would be acheived by allowing creating configs, sections, extensions etc. in openssl btool or x509 etype. and then creating the final cert binary in openssl. What do you think?
It is tricky because we only have one example in the etype at present so it is always hard to know which way to go. I think it will be clearer down the track when we have a bit more code here. But if we go with having the bintool just be a shell, then we definitely won't get any reuse for the next customer.
The bit I would like to see in the bintool is the creation of the text file containing the cert. The etype should ideally provide properties (which can be set up the ti_secure etype in the __init__() method) that cover the required openssl params. The simplest thing would be just 'this is TI signing' but I would like to pick this apart a bit so that the properties are more generic, if possible.
So the btool takes arguments that tell it about the text file to create. It creates the text file and runs openssl.
The x509 etype calls the openssl bintool's z509 method to actually create the cert, presumably passing quite a few args and maybe a dict.
So:
- expand openssl.x509_cert() with more args
- expand x509 etype with more properties (using the defaults)
- update your ti-secure etype to set those properties in certain ways
Since the bintool code that is there is just an example cert, you can switch it to do whatever you want for this case, i.e. change the defaults. That might simplify things for you.
Anyway, for an initial series I think that will provide a good basis for this work. If we need to refactor later, we have our test coverage to help us.
Regards,
Simon
Quoted 80 lines
Quoted 70 lines
Quoted 6 lines
Quoted 6 lines
If most of the cert is the same, you could
Quoted 3 lines
pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Quoted 9 lines
Quoted 2 lines
Did you mean YAML? If so in the patch I linked, I don't think I had a example for that. Could you point out what exactly you're asking about?
Well I am wondering why it is in the code...is there a yaml file that you need to ingest and process? What is it for?
...actually I see the yaml files in your tree mentioned below. Does this come out of some other tool?
Right, so currently we have certain board specific configurations in YAML. This is input to our board configuration binary entry type [6], which converts YAML into binary blobs prepended with certain headers needed.
Quoted 49 lines
Quoted 9 lines
Quoted 4 lines
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
Yes, in the same github link I have the whole tree [3] that contains DTBs for couple of the devices [4] and [5], please have a look and let me know (I might force push a few changes in the next couple of days, so better to look from the tree)
OK I see. Yes it looks pretty good to me.
Quoted 11 lines
Quoted 8 lines
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Yes, you're right. Will address that when sending the patch series completely.
OK
Quoted 22 lines
Quoted 17 lines
Anyway, apart from my questions it seems good.
Regards,
Simon[3] https://github.com/nehamalcom/u-boot/commits/ti-secure-functionality
[4]
https://github.com/nehamalcom/u-boot/commit/dda1f9caf436df59c576466f35262df90aa1c0afQuoted 6 lines
Quoted 2 lines
Regards,
Simon[6]
https://github.com/nehamalcom/u-boot/commit/3ca258562c374e553a7005a5b6d6441358801e78--
Thanking You
Neha Malcom Francis
Hi Simon
Quoted 100 lines · Simon Glass
Hi Neha,
Quoted 60 lines · Neha Malcom Francis
Hi Simon
Quoted 49 lines · Neha Malcom Francis
Hi Simon
Quoted 46 lines · Simon Glass
Hi Neha,
Quoted 30 lines · Neha Malcom Francis
Hi Simon
Quoted 18 lines · Simon Glass
Hi Neha,
Quoted 9 lines · Neha Malcom Francis
Hi Simon,
Before I roll out the entire series that works for packaging K3 bootloader images, wanted to get some reviews and comments regarding the
implementation of the signing etype [1] . I believe I've taken into consideration what we've discussed earlier [2].Quoted 4 lines
Let me know your thoughts. The tree is also WIP, and was mainly designed
for testing the signing etype on two of the devices. I will add the remaining and refine the series based on the next comments.Quoted 7 lines
Yes this looks reasonable to me. For the openssl method, can you create a new 'real' method and put the cert stuff in there instead of using a 'custom' one? It seems to have a lot in common with what is there. We should really have an internal cert-generator method in that class, with other functions in that class doing appropriate things. I am looking for code reuse here, as well as clear indication of what the cert is for or does.
Quoted 4 lines
So you're suggesting to include the config creation within the openssl btool, am I right? For example methods to generate a config, add section to a config, add extension to a section of a config... etc? I can take a look at implementing this if this is what you have suggested.
I am more thinking that your use case could be a new method in that file, with arguments that suit your case, but with common code to create a cert of the correct type. That means pulling out the existing cert creation into a new (internal) function in that btool that does both types of cert. For the CN args I think a dict would be suitable to pass in the settings.
Quoted 6 lines
Quoted 4 lines
I'm trying to avoid people passing in a cert every time, since that is going to create a lot of code duplication and it will be hard to take advantage of common algos.
Okay I think I get it, let me respin with this in mind.
Quoted 7 lines
I am still a little doubtful about putting in *this* cert generation in the openssl btool. These sections and extensions are TI specific and I don't think there would be code duplication in future. The least code duplication along with functionality would be acheived by allowing creating configs, sections, extensions etc. in openssl btool or x509 etype. and then creating the final cert binary in openssl. What do you think?
It is tricky because we only have one example in the etype at present so it is always hard to know which way to go. I think it will be clearer down the track when we have a bit more code here. But if we go with having the bintool just be a shell, then we definitely won't get any reuse for the next customer.
The bit I would like to see in the bintool is the creation of the text file containing the cert. The etype should ideally provide properties (which can be set up the
ti_secureetype in the__init__()method) that cover the required openssl params. The simplest thing would be just 'this is TI signing' but I would like to pick this apart a bit so that the properties are more generic, if possible.So the btool takes arguments that tell it about the text file to create. It creates the text file and runs openssl.
The x509 etype calls the openssl bintool's z509 method to actually create the cert, presumably passing quite a few args and maybe a dict.
So:
- expand
openssl.x509_cert()with more args
- expand x509 etype with more properties (using the defaults)
- update your ti-secure etype to set those properties in certain waysSince the bintool code that is there is just an example cert, you can switch it to do whatever you want for this case, i.e. change the defaults. That might simplify things for you.
Quoted 8 lines
Anyway, for an initial series I think that will provide a good basis for this work. If we need to refactor later, we have our test coverage to help us.
Regards,
Simon
Thanks for explaining! I will work on it this way.
Quoted 80 lines
Quoted 80 lines
Quoted 70 lines
Quoted 6 lines
Quoted 6 lines
If most of the cert is the same, you could
Quoted 3 lines
pass a dict for the CN stuff, perhaps?
What is the taml for? It is hard to tell, from the example provided.
Quoted 9 lines
Quoted 2 lines
Did you mean YAML? If so in the patch I linked, I don't think I had a example for that. Could you point out what exactly you're asking about?
Well I am wondering why it is in the code...is there a yaml file that you need to ingest and process? What is it for?
...actually I see the yaml files in your tree mentioned below. Does this come out of some other tool?
Right, so currently we have certain board specific configurations in YAML. This is input to our board configuration binary entry type [6], which converts YAML into binary blobs prepended with certain headers needed.
Quoted 49 lines
Quoted 9 lines
Quoted 4 lines
Do you have a .dts which shows the full image for a board? I think the cert stuff looks right, but it's a bit hard to tell.
Yes, in the same github link I have the whole tree [3] that contains DTBs for couple of the devices [4] and [5], please have a look and let me know (I might force push a few changes in the next couple of days, so better to look from the tree)
OK I see. Yes it looks pretty good to me.
Quoted 11 lines
Quoted 8 lines
When sending the patches please do do follow the function-commenting style and make sure that it is clear what each arg means. E.g. I saw a hash integer which I assume is used to pass 256 or 384 or 512 for sha hashing. It should indicate the possible values / meaning in the arg. In fact, in that case, it might be better to pass a string like 'sha256'.
Yes, you're right. Will address that when sending the patch series completely.
OK
Quoted 22 lines
Quoted 17 lines
Anyway, apart from my questions it seems good.
Regards,
Simon[3] https://github.com/nehamalcom/u-boot/commits/ti-secure-functionality
[4]
https://github.com/nehamalcom/u-boot/commit/dda1f9caf436df59c576466f35262df90aa1c0afQuoted 6 lines
Quoted 2 lines
Regards,
Simon[6]
https://github.com/nehamalcom/u-boot/commit/3ca258562c374e553a7005a5b6d6441358801e78--
Thanking You
Neha Malcom Francis
Signature · 2 lines
Thanking You Neha Malcom Francis