Allow AM335x MPU core clock speed to be specified in the board config file
PATCH v4 1/1 Allow AM335x MPU core clock speed to be specified in the board config file
Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:-
#define CONFIG_SYS_MPUCLK <desired clock freq in MHz>
---
Changes in v4:
- Now defined as MHz (not Hz)
Changes in v3:
- Changed from V_MPUCLK to CONFIG_SYS_MPUCLK
- Added entry in README
Changes in v2:
- Tweaked after comments from Peter Korsgaard
README | 4 ++++ arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 7 +++++-- 2 files changed, 9 insertions(+), 2 deletions(-)
README +4 -0
@@ -3820,6 +3820,10 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. +- CONFIG_SYS_MPUCLK + Defines the MPU clock speed (in MHz). + + NOTE : currently only supported on AM335x platforms. Freescale QE/FMAN Firmware Support: -----------------------------------
arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +5 -2
@@ -21,8 +21,11 @@#define OSC (V_OSCK/1000000) -/* MAIN PLL Fdll = 550 MHZ, */ -#define MPUPLL_M 550 +/* MAIN PLL Fdll = 550 MHz, by default */ +#ifndef CONFIG_SYS_MPUCLK +#define CONFIG_SYS_MPUCLK 550 +#endif +#define MPUPLL_M CONFIG_SYS_MPUCLK#define MPUPLL_N (OSC-1)#define MPUPLL_M2 1
Signature · 1 line
1.7.9.5
PATCH v4 1/1 Allow AM335x MPU core clock speed to be specified in the board config file
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Mark" == Mark Jackson <[email protected]> writes:
Mark> Allow AM335x MPU core clock speed to be specified in the board config file. Mark> To use, add the following to the board's config file:-
Mark> #define CONFIG_SYS_MPUCLK <desired clock freq in MHz>
Mark> Signed-off-by: Mark Jackson <[email protected]>
Signature · 1 line
Bye, Peter Korsgaard
PATCH v4 1/1 Allow AM335x MPU core clock speed to be specified in the board config file
In reply to Mark JacksonQuoted 7 lines · Mark Jackson
Allow AM335x MPU core clock speed to be specified in the board config file. To use, add the following to the board's config file:-
#define
CONFIG_SYS_MPUCLK<desired clock freq in MHz>Signed-off-by Mark Jackson <[email protected]>Acked-by Peter Korsgaard <[email protected]>
Applied to u-boot-ti/master (and already pulled into u-boot-arm), thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130326/27c561de/attachment.pgp>