access to hardware registers using KGDB on ARM
Hello everyone,
I have arm SoC AM3517 (Cortex-A8) running linux 2.6.32. I am trying to access hardware registers using kgdb. I can connect to the board via RS232, can read variables in kernel space, control processes using breakpoints, but I can't read hardware register.
For example, I am trying to read UART3 registers. Information about UART3 is saved in structure:
static struct plat_serial8250_port serial_platform_data2[] = {
{
.mapbase = OMAP_UART3_BASE,
.irq = 74,
.iotype = UPIO_MEM,
.regshift = 2,
...
}
}mapbase is a physical address. According to the Technical Reference Manual is should be 0x49020000.
I checked this field using kgdb:
(gdb) p/x serial_platform_data2[0].mapbase
$34 = 0x49020000
This structure has the field membase. As I understand, it contains virtual address of the mapbase physical address. This field is initialized on UART init via function ioremap().
I checked this field as well:
(gdb) p/x serial_platform_data2[0].membase
$35 = 0xfb020000
Now I am trying to read register MCR_REG, that has offset 0x10 from the base address.
(gdb) x serial_platform_data2[0].membase+0x100xfb020010: Cannot access memory at address 0xfb020010
(gdb) x serial_platform_data2[0].mapbase+0x100x49020010: Cannot access memory at address 0x49020010
As I understand, the membase address should work. Right? Why has access failed? Is it kgdb limitation?
Signature · 2 lines
Best regards, Andrey Skvortsov