arch: frv: mb93090-mb00: remove '__init' for pci_fixup_umc_ide() which used by 'DECLARE_PCI_FIXUP_HEADER'

pci_fixup_umc_ide() is for 'DECLARE_PCI_FIXUP_HEADER', so need remove it from init section to normal section.

The related warning (with allmodconfig):

LD arch/frv/mb93090-mb00/built-in.o
WARNING: arch/frv/mb93090-mb00/built-in.o(.pci_fixup_header+0x4c): Section mismatch in reference from the variable __pci_fixup_PCI_VENDOR_ID_UMCPCI_DEVICE_ID_UMC_UM8886BFpci_fixup_umc_ide to the function .init.text:pci_fixup_umc_ide() The variable __pci_fixup_PCI_VENDOR_ID_UMCPCI_DEVICE_ID_UMC_UM8886BFpci_fixup_umc_ide references
a function __init pci_fixup_umc_ide().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __init annotation of
pci_fixup_umc_ide() so it may be used outside an exit section.

Signed-off-by Chen Gang <[email protected]>

---
 arch/frv/mb93090-mb00/pci-vdk.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

arch/frv/mb93090-mb00/pci-vdk.c +1 -2

index 0aa35f0..56a3abf 100644
@@ -254,7 +254,7 @@ static void __init pcibios_fixup_peer_bridges(void)
  * Exceptions for specific devices. Usually work-arounds for fatal design flaws.
  */
 
-static void __init pci_fixup_umc_ide(struct pci_dev *d)
+static void pci_fixup_umc_ide(struct pci_dev *d)
 {
        /*
         * UM8886BF IDE controller sets region type bits incorrectly,
--

1.7.7.6

Quoted 15 lines · Chen Gang

Quoted 15 lines

pci_fixup_umc_ide() is for 'DECLARE_PCI_FIXUP_HEADER', so need remove it from init section to normal section.

The related warning (with allmodconfig):

LD arch/frv/mb93090-mb00/built-in.o
WARNING: arch/frv/mb93090-mb00/built-in.o(.pci_fixup_header+0x4c): Section mismatch in reference from the variable __pci_fixup_PCI_VENDOR_ID_UMCPCI_DEVICE_ID_UMC_UM8886BFpci_fixup_umc_ide to the function .init.text:pci_fixup_umc_ide() The variable __pci_fixup_PCI_VENDOR_ID_UMCPCI_DEVICE_ID_UMC_UM8886BFpci_fixup_umc_ide references
a function __init pci_fixup_umc_ide().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __init annotation of
pci_fixup_umc_ide() so it may be used outside an exit section.

Quoted 1 line

Quoted 1 line

Signed-off-by Chen Gang <[email protected]>

Reviewed-by Bjorn Helgaas <[email protected]>