Pandaboard Kernel 3.8.13.6 no HDMI
The Pandaboard list seems dormant so I am seeking help here.
The previous kernel with HDMI video output was 3.2.7x5.
I built and installed this new kernel with this xorg.conf, it does not work. Section "Device"
Identifier "fb0"
Driver "omapfb"
Option "fb" "/dev/fb0"EndSection
Section "Monitor"
Identifier "HP"
ModeLine "1920x1080" 148.501 1920 2008 2052 2200 1080 1084 10891125 -HSync -VSync
EndSection
Section "Screen"
Identifier "screen0"
Device "fb0"
Monitor "HP"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1920x1080" "800x480"
EndSubSectionEndSection
Mode "800x480"
# D: 29.001 MHz, H: 31.251 kHz, V: 59.525 Hz
DotClock 29.002
HTimings 800 840 888 928
VTimings 480 503 506 525
Flags "-HSync" "-VSync"EndMode
Using the udlfb driver and an xorg.conf for the Lilliput USB 7" screen there is no problem, LXDE is up and running and CRTL-ALT-F1 etc. all OK, but I need the USB screen for the Beaglebone.
root@panda:/etc/X11# lsmod Module Size Used by omapdss 253516 0 udlfb 17703 2 bluetooth 221172 6 snd_usb_audio 115881 0 snd_usbmidi_lib 18680 1 snd_usb_audio snd_rawmidi 21747 1 snd_usbmidi_lib snd_hwdep 6190 1 snd_usb_audio snd_pcm_oss 42617 0 snd_mixer_oss 14244 1 snd_pcm_oss snd_pcm 84961 2 snd_pcm_oss,snd_usb_audio snd_page_alloc 5296 1 snd_pcm snd_timer 20277 1 snd_pcm snd 61483 8 snd_pcm_oss,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_mixer_oss soundcore 7260 1 snd ehci_hcd 54613 0 ohci_hcd 31836 0 root@panda:/etc/X11# ls /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/ backlight omap2 udlfb.ko root@panda:/etc/X11# ll /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/omap2/omapfb total 64 drwxr-xr-x 2 root root 4096 Sep 2 10:18 ./ drwxr-xr-x 5 root root 4096 Sep 2 10:18 ../ -rw-r--r-- 1 root root 56916 Sep 2 02:52 omapfb.ko root@panda:/etc/X11# modprobe omapfb ERROR: could not insert 'omapfb': No such device root@panda:/etc/X11# insmod /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/omap2/omapfb/omapfb.ko Error: could not insert module /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/omap2/omapfb/omapfb.ko: No such device root@panda:/1/ubuntu-raring# grep CONFIG_FB .config CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_ARMCLCD=y CONFIG_FB_UVESA=y CONFIG_FB_TMIO=y CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_UDL=m CONFIG_FB_VIRTUAL=y CONFIG_OMAP2_VRFB=y CONFIG_OMAP2_DSS_RFBI=y CONFIG_FB_OMAP2=m CONFIG_FB_OMAP2_DEBUG_SUPPORT=y CONFIG_FB_OMAP2_NUM_FBS=3
root@panda:/etc/X11# grep HDMI /1/ubuntu-raring/.config CONFIG_OMAP4_DSS_HDMI=y
ONFIG_ARCH_OMAP4=yCONFIG_MACH_OMAP4_PANDA=y
Displayed on the serial console
=======================
root@panda:~# [34587.439270] omapdss error: timeout reading edid [34587.445220] omapfb omapfb: failed to allocate framebuffer [34587.450958] omapfb omapfb: failed to allocate fbmem [34587.456604] omapfb omapfb: failed to setup omapfb [34587.461853] failed to register omapfb driver Regards Sid.
Signature · 4 lines
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support Senior Staff Specialist, Cricket Coach Microsoft Windows Free Zone - Linux used for all Computing Tasks
Hi,
There are a couple of options here.
Quoted 11 lines · Sid Boyce
The Pandaboard list seems dormant so I am seeking help here.
The previous kernel with HDMI video output was 3.2.7x5.
I built and installed this new kernel with this xorg.conf, it does not work.
Section "Device"Identifier "fb0" Driver "omapfb" Option "fb" "/dev/fb0"EndSection
Looks like the problem below was buffer allocation. You could use omapdrm instead of omapfb which should allocate buffers successfully. I think the omapdrm drivers was in staging at that point. You could search for it in the .config, and set NUM_CRTCS to 2.
Quoted 80 lines
Section "Monitor"
Identifier "HP" ModeLine "1920x1080" 148.501 1920 2008 2052 2200 1080 1084 10891125 -HSync -VSync
EndSectionSection "Screen"
Identifier "screen0" Device "fb0" Monitor "HP" DefaultDepth 16 SubSection "Display" Depth 16 Modes "1920x1080" "800x480" EndSubSectionEndSection
Mode "800x480"
# D: 29.001 MHz, H: 31.251 kHz, V: 59.525 Hz DotClock 29.002 HTimings 800 840 888 928 VTimings 480 503 506 525 Flags "-HSync" "-VSync"EndMode
Using the udlfb driver and an xorg.conf for the Lilliput USB 7" screen there is no problem, LXDE is up and running and CRTL-ALT-F1 etc. all OK, but I need the USB screen for the Beaglebone.
root@panda:/etc/X11# lsmod Module Size Used by omapdss 253516 0 udlfb 17703 2 bluetooth 221172 6 snd_usb_audio 115881 0 snd_usbmidi_lib 18680 1 snd_usb_audio snd_rawmidi 21747 1 snd_usbmidi_lib snd_hwdep 6190 1 snd_usb_audio snd_pcm_oss 42617 0 snd_mixer_oss 14244 1 snd_pcm_oss snd_pcm 84961 2 snd_pcm_oss,snd_usb_audio snd_page_alloc 5296 1 snd_pcm snd_timer 20277 1 snd_pcm snd 61483 8 snd_pcm_oss,snd_usb_audio,snd_hwdep,snd_timer,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_mixer_osssoundcore 7260 1 snd ehci_hcd 54613 0 ohci_hcd 31836 0 root@panda:/etc/X11# ls /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/ backlight omap2 udlfb.ko root@panda:/etc/X11# ll /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/omap2/omapfb total 64 drwxr-xr-x 2 root root 4096 Sep 2 10:18 ./ drwxr-xr-x 5 root root 4096 Sep 2 10:18 ../ -rw-r--r-- 1 root root 56916 Sep 2 02:52 omapfb.ko root@panda:/etc/X11# modprobe omapfb ERROR: could not insert 'omapfb': No such device root@panda:/etc/X11# insmod /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/omap2/omapfb/omapfb.ko Error: could not insert module /lib/modules/3.8.13.6x-dirty/kernel/drivers/video/omap2/omapfb/omapfb.ko: No such device root@panda:/1/ubuntu-raring# grep CONFIG_FB .config CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y CONFIG_FB_ARMCLCD=y CONFIG_FB_UVESA=y CONFIG_FB_TMIO=y
Quoted 8 lines
CONFIG_FB_TMIO_ACCELL=y CONFIG_FB_UDL=m CONFIG_FB_VIRTUAL=y CONFIG_OMAP2_VRFB=y CONFIG_OMAP2_DSS_RFBI=y CONFIG_FB_OMAP2=m CONFIG_FB_OMAP2_DEBUG_SUPPORT=y CONFIG_FB_OMAP2_NUM_FBS=3
The other option is to figure out why it's not working with omapfb. Could you add a CONFIG_OMAP2_DSS_DEBUG in order to get additional DSS prints?
Quoted 7 lines
root@panda:/etc/X11# grep HDMI /1/ubuntu-raring/.config CONFIG_OMAP4_DSS_HDMI=yONFIG_ARCH_OMAP4=y
CONFIG_MACH_OMAP4_PANDA=y
Quoted 7 lines
Displayed on the serial console
=======================root@panda:~# [34587.439270] omapdss error: timeout reading edid [34587.445220] omapfb omapfb: failed to allocate framebuffer [34587.450958] omapfb omapfb: failed to allocate fbmem [34587.456604] omapfb omapfb: failed to setup omapfb [34587.461853] failed to register omapfb driver
The debug prints will help with the edid timeout. About the allocation of buffers, I think it should work if you enable CMA. And set CONFIG_CMA_SIZE_MBYTES to say, 24 Mb. That should allocate the buffers successfully.
Archit