GPIO triggers kernel reboot
Hello all,
is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?
If not, how can be done this, so that it has a chance to go into mainline?
Thanks for any suggestions
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 9 lines
-----Original Message-----
From: linux-embedded-owner at vger.kernel.org [mailto:linux-embedded-owner at vger.kernel.org] On Behalf Of Heiko Schocher
Sent: Saturday, January 25, 2014 8:03 AM
To: linux-embedded at vger.kernel.org
Cc: Wolfgang Denk; linux-arm-kernel at lists.infradead.org
Subject: GPIO triggers kernel rebootHello all,
Quoted 8 lines
is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?
If not, how can be done this, so that it has a chance to go into mainline?
Thanks for any suggestions
bye,
Heiko
Hi Heiko,
Call kexec() from the GPIO driver.
It will take some effort to get it right :)
Sincerely,
John Mehaffey
Principal Engineer, Automotive
Mentor Graphics
Quoted 5 lines
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 11 lines
-----Original Message-----
From: linux-embedded-owner at vger.kernel.org [mailto:linux-embedded-owner at vger.kernel.org] On Behalf Of Heiko Schocher
Sent: Saturday, January 25, 2014 8:03 AM
To: linux-embedded at vger.kernel.org
Cc: Wolfgang Denk; linux-arm-kernel at lists.infradead.org
Subject: GPIO triggers kernel rebootHello all,
Quoted 8 lines
is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?
If not, how can be done this, so that it has a chance to go into mainline?
Thanks for any suggestions
bye,
Heiko
Hi Heiko,
Call kexec() from the GPIO driver.
It will take some effort to get it right :)
Or if a simple reboot is all that you want, examine the several reboot APIs in kernel/reboot.c
Sincerely,
John Mehaffey
Principal Engineer, Automotive
Mentor Graphics
Quoted 7 lines
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello John,
Am 25.01.2014 21:24, schrieb Mehaffey, John:
Quoted 15 lines
Quoted 15 lines
-----Original Message-----
From: linux-embedded-owner at vger.kernel.org [mailto:linux-embedded-owner at vger.kernel.org] On Behalf Of Heiko Schocher
Sent: Saturday, January 25, 2014 8:03 AM
To: linux-embedded at vger.kernel.org
Cc: Wolfgang Denk; linux-arm-kernel at lists.infradead.org
Subject: GPIO triggers kernel rebootHello all,
is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?
If not, how can be done this, so that it has a chance to go into mainline?
Quoted 8 lines
Quoted 4 lines
Thanks for any suggestions
bye,
HeikoHi Heiko,
Callkexec()from the GPIO driver.
It will take some effort to get it right :)
Thanks for your answer!
Hmm.. but has this a chance to go into mainline?
Quoted 1 line
Or if a simple reboot is all that you want, examine the several reboot APIs in
kernel/reboot.c
A current implementation from a customer is for an arm, am335x based board to add in board setup code:
ret = request_irq(OMAP_GPIO_IRQ(RESET_BUTTON_IRQ_GPIO)
, (irq_handler_t)arm_pm_restart, IRQF_TRIGGER_LOW, "reset button", NULL);
and as I want to bring this board to mainline, I think this is not an acceptable/good way ... or?
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Le 25/01/2014 08:02, Heiko Schocher a ?crit :
Quoted 7 lines
Hello all,
is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?
If not, how can be done this, so that it has a chance to go into mainline?
Your GPIO could (should) be bound to a gpio-keys driver which will deliver key presses event; which you can ultimately bind to the action of triggering a system reboot.
Granted, this makes you cross a lot of layers, and requires user-space to implemnt the reboot policy, but what you are asking for is both a mechanism and policy mix, which is usually not accepted.
You are probably working with HW which won't change, but wiring a reset button to a system reset output is usually much simpler ;)
Quoted 5 lines
Thanks for any suggestions
bye,
Heiko
A message that is not in the archive (sent off-list or not yet received): CALLGbRKK_ZcOB6nAiV67njrphXMQXN7Y2s81n5k3PWoSVrsrUw@mail.gmail.com
Hello Steve,
Thanks for your answer!
Am 25.01.2014 20:39, schrieb Steve deRosier:
Quoted 6 lines
Hi Heiko,
It's certainly possible, and it's also easily done from user-space.
Something like this is more policy than function. It's also a potential
security issue. As such I'd expect it highly unlikely that the kernel maintainers would allow it to go upstream. Give it a try though.
Ok, thats what I also think ...
Quoted 2 lines
I'd approach this from user-space. Add in the gpio-keys driver and use the input-event-daemon to trigger a reboot. Super easy.
Yes, that was also my suggestion, but is there a way to do this without user space usage in a generic way?
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Quoted 12 lines · Heiko Schocher
Hello Steve,
Thanks for your answer!
Am 25.01.2014 20:39, schrieb Steve deRosier:
Quoted 6 lines
Hi Heiko,
It's certainly possible, and it's also easily done from user-space.
Something like this is more policy than function. It's also a potential
security issue. As such I'd expect it highly unlikely that the kernel maintainers would allow it to go upstream. Give it a try though.
Quoted 7 lines
Ok, thats what I also think ...
Quoted 2 lines
I'd approach this from user-space. Add in the gpio-keys driver and use the input-event-daemon to trigger a reboot. Super easy.
Yes, that was also my suggestion, but is there a way to do this without user space usage in a generic way?
I think that you can register an input handler for that. iirc, there was a driver doing something similar for apm.
Arnaud
Quoted 7 lines · Arnaud Patard
Quoted 7 lines
Quoted 4 lines
It's certainly possible, and it's also easily done from user-space.
Something like this is more policy than function. It's also a potential
security issue. As such I'd expect it highly unlikely that the kernel maintainers would allow it to go upstream. Give it a try though.Ok, thats what I also think ...
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
I'd approach this from user-space. Add in the gpio-keys driver and use the input-event-daemon to trigger a reboot. Super easy.
Yes, that was also my suggestion, but is there a way to do this without user space usage in a generic way?
I think that you can register an input handler for that. iirc, there was a driver doing something similar for apm.
According to Documentation/sysctl/kernel.txt, the default for the "ctrl-alt-del" input is to just reboot.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds