Skip to contentSkip to conversation

GPIO triggers kernel reboot

DISCUSSION Heiko Schocher 5 participants 8 messages Jan 25, 2014 – Jan 27, 2014 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hello all,

is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?

If not, how can be done this, so that it has a chance to go into mainline?

Thanks for any suggestions

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#1 lore raw
Quoted 9 lines

-----Original Message-----
From: linux-embedded-owner at vger.kernel.org [mailto:linux-embedded-owner at vger.kernel.org] On Behalf Of Heiko Schocher
Sent: Saturday, January 25, 2014 8:03 AM
To: linux-embedded at vger.kernel.org
Cc: Wolfgang Denk; linux-arm-kernel at lists.infradead.org
Subject: GPIO triggers kernel reboot

Hello all,

Quoted 8 lines

is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?

If not, how can be done this, so that it has a chance to go into mainline?

Thanks for any suggestions

bye,
Heiko

Hi Heiko,
Call kexec() from the GPIO driver.
It will take some effort to get it right :)

Sincerely,
John Mehaffey
Principal Engineer, Automotive
Mentor Graphics

Quoted 5 lines
Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo at vger.kernel.org More majordomo info at  http://vger.kernel.org/majordomo-info.html
#2 lore raw
Quoted 11 lines

-----Original Message-----
From: linux-embedded-owner at vger.kernel.org [mailto:linux-embedded-owner at vger.kernel.org] On Behalf Of Heiko Schocher
Sent: Saturday, January 25, 2014 8:03 AM
To: linux-embedded at vger.kernel.org
Cc: Wolfgang Denk; linux-arm-kernel at lists.infradead.org
Subject: GPIO triggers kernel reboot

Hello all,

Quoted 8 lines

is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?

If not, how can be done this, so that it has a chance to go into mainline?

Thanks for any suggestions

bye,
Heiko

Hi Heiko,
Call kexec() from the GPIO driver.
It will take some effort to get it right :)

Or if a simple reboot is all that you want, examine the several reboot APIs in kernel/reboot.c

Sincerely,
John Mehaffey
Principal Engineer, Automotive
Mentor Graphics

Quoted 7 lines
Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
--
To unsubscribe from this list: send the line "unsubscribe 
linux-embedded" in the body of a message to majordomo at vger.kernel.org 
More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

#4 lore raw
In reply to Heiko Schocher

Le 25/01/2014 08:02, Heiko Schocher a ?crit :

Quoted 7 lines

Hello all,

is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?

If not, how can be done this, so that it has a chance to go into mainline?

Your GPIO could (should) be bound to a gpio-keys driver which will deliver key presses event; which you can ultimately bind to the action of triggering a system reboot.

Granted, this makes you cross a lot of layers, and requires user-space to implemnt the reboot policy, but what you are asking for is both a mechanism and policy mix, which is usually not accepted.

You are probably working with HW which won't change, but wiring a reset button to a system reset output is usually much simpler ;)

Quoted 5 lines

Thanks for any suggestions

bye,
Heiko

#3 lore raw
In reply to Mehaffey, John

Hello John,

Am 25.01.2014 21:24, schrieb Mehaffey, John:

Quoted 15 lines
Quoted 15 lines

-----Original Message-----
From: linux-embedded-owner at vger.kernel.org [mailto:linux-embedded-owner at vger.kernel.org] On Behalf Of Heiko Schocher
Sent: Saturday, January 25, 2014 8:03 AM
To: linux-embedded at vger.kernel.org
Cc: Wolfgang Denk; linux-arm-kernel at lists.infradead.org
Subject: GPIO triggers kernel reboot

Hello all,

is it possible to reboot current mainline kernel triggered from a GPIO in kernel space?

If not, how can be done this, so that it has a chance to go into mainline?

Quoted 8 lines
Quoted 4 lines

Thanks for any suggestions

bye,
Heiko

Hi Heiko,
Call kexec() from the GPIO driver.
It will take some effort to get it right :)

Thanks for your answer!
Hmm.. but has this a chance to go into mainline?

Quoted 1 line

Or if a simple reboot is all that you want, examine the several reboot APIs in kernel/reboot.c

A current implementation from a customer is for an arm, am335x based board to add in board setup code:

ret = request_irq(OMAP_GPIO_IRQ(RESET_BUTTON_IRQ_GPIO)
, (irq_handler_t)arm_pm_restart, IRQF_TRIGGER_LOW, "reset button", NULL);

and as I want to bring this board to mainline, I think this is not an acceptable/good way ... or?

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#6 lore raw
In reply to a message not in the archive

Hello Steve,

Thanks for your answer!

Am 25.01.2014 20:39, schrieb Steve deRosier:

Quoted 6 lines

Hi Heiko,

It's certainly possible, and it's also easily done from user-space.
Something like this is more policy than function. It's also a potential
security issue. As such I'd expect it highly unlikely that the kernel maintainers would allow it to go upstream. Give it a try though.

Ok, thats what I also think ...

Quoted 2 lines

I'd approach this from user-space. Add in the gpio-keys driver and use the input-event-daemon to trigger a reboot. Super easy.

Yes, that was also my suggestion, but is there a way to do this without user space usage in a generic way?

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#7 lore raw
Quoted 12 lines · Heiko Schocher

Hello Steve,

Thanks for your answer!

Am 25.01.2014 20:39, schrieb Steve deRosier:

Quoted 6 lines

Hi Heiko,

It's certainly possible, and it's also easily done from user-space.
Something like this is more policy than function. It's also a potential
security issue. As such I'd expect it highly unlikely that the kernel maintainers would allow it to go upstream. Give it a try though.

Quoted 7 lines

Ok, thats what I also think ...

Quoted 2 lines

I'd approach this from user-space. Add in the gpio-keys driver and use the input-event-daemon to trigger a reboot. Super easy.

Yes, that was also my suggestion, but is there a way to do this without user space usage in a generic way?

I think that you can register an input handler for that. iirc, there was a driver doing something similar for apm.

Arnaud

#8 lore raw
Quoted 7 lines · Arnaud Patard
Quoted 7 lines
Quoted 4 lines

It's certainly possible, and it's also easily done from user-space.
Something like this is more policy than function. It's also a potential
security issue. As such I'd expect it highly unlikely that the kernel maintainers would allow it to go upstream. Give it a try though.

Ok, thats what I also think ...

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

I'd approach this from user-space. Add in the gpio-keys driver and use the input-event-daemon to trigger a reboot. Super easy.

Yes, that was also my suggestion, but is there a way to do this without user space usage in a generic way?

I think that you can register an input handler for that. iirc, there was a driver doing something similar for apm.

According to Documentation/sysctl/kernel.txt, the default for the "ctrl-alt-del" input is to just reboot.

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds