Skip to contentSkip to conversation

Support for new arch 'ppc64le'

DISCUSSION Mathieu Desnoyers 2 participants 2 messages Mar 11, 2014 – Mar 12, 2014 2 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

----- Original Message -----

Quoted 25 lines

From: "ravi" <[email protected]>
To: [email protected]
Sent: Sunday, March 2, 2014 8:02:12 PM
Subject: [lttng-dev] Support for new arch 'ppc64le'

Hi,

We are in the process of adding support for new architecture 'ppc64le' (PowerPC 64 Little Endian) and as part of that, We have worked with libtool maintainer to get alpha release (links below) which has all the needed bits to support building on ppc64le arch. ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.gz(1.6MB) ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.xz(920KB) (A stable libtool release is expected soon this year)

' userspace-rcu-0.8.1' didn't build on 'ppc64le' system because of outdated libtoo.m4/config.guess files.
Latest ' liburcu' source package we picked is from :
http://lttng.org/files/urcu/userspace-rcu-0.8.1.tar.bz2

Along with changes to libtool related files, we have found a patch available in ubuntu src repo, which is required to build 'liburcu' successfully on 'ppc64le' system.
Im attaching the same patch which is created on top of "liburcu-0.7.7-1"...

Quoted 4 lines

hence we request you to apply attached patch , and spin off a new version of 'liburcu' using the latest libtool alpha release . So that we can test ppc64le fixes.
Your response is highly appreciated

Hi,

I see that the patch you propose adds both "powerpc64le" and "aarch64" entries. Why are there two of them ?

Moreover, it might be a bit aggressive to package the liburcu tarballs with an alpha version of libtool. When we understand more about the need for one or two specific entries into the configure.ac of liburcu, then we can add them, but until there is a stable version of libtool supporting those, you will probably have to create your own tarballs from the userspace RCU git repository using "make dist" against your alpha libtool.

Thoughts ?

Thanks,

Mathieu

Quoted 8 lines

--
Ravindran
IBM LinuxTechnologyCenter

_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

Signature · 3 lines
Mathieu Desnoyers 
EfficiOS Inc. 
http://www.efficios.com 

_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 26 lines · Mathieu Desnoyers

----- Original Message -----

Quoted 16 lines

From: "ravi" <[email protected]>
To: [email protected]
Sent: Sunday, March 2, 2014 8:02:12 PM
Subject: [lttng-dev] Support for new arch 'ppc64le'
Hi,
We are in the process of adding support for new architecture 'ppc64le' (PowerPC 64 Little Endian) and as part of that, We have worked with libtool maintainer to get alpha release (links below) which has all the needed bits to support building on ppc64le arch. ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.gz(1.6MB) ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.xz(920KB) (A stable libtool release is expected soon this year)
' userspace-rcu-0.8.1' didn't build on 'ppc64le' system because of outdated libtoo.m4/config.guess files.
Latest ' liburcu' source package we picked is from :
http://lttng.org/files/urcu/userspace-rcu-0.8.1.tar.bz2

Quoted 8 lines

Along with changes to libtool related files, we have found a patch available in ubuntu src repo, which is required to build 'liburcu' successfully on 'ppc64le' system.
Im attaching the same patch which is created on top of "liburcu-0.7.7-1"... hence we request you to apply attached patch , and spin off a new version of 'liburcu' using the latest libtool alpha release . So that we can test ppc64le fixes.
Your response is highly appreciated

Quoted 3 lines

Hi,

I see that the patch you propose adds both "powerpc64le" and "aarch64" entries. Why are there two of them ?

I think the entry "aarch64" entry is related to arm64 archtype. I will try to contact the original author of the patch and reconfirm.

Quoted 5 lines

Moreover, it might be a bit aggressive to package the liburcu tarballs with an alpha version of libtool. When we understand more about the need for one or two specific entries into the configure.ac of liburcu, then we can add them, but until there is a stable version of libtool supporting those, you will probably have to create your own tarballs from the userspace RCU git repository using "make dist" against your alpha libtool.

okay.

Quoted 14 lines

Thoughts ?

Thanks,

Mathieu

Quoted 7 lines

--
Ravindran
IBM LinuxTechnologyCenter
_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

Signature · 2 lines
Ravindran
IBM LinuxTechnologyCenter