Support for new arch 'ppc64le'
----- Original Message -----
Quoted 25 lines
From: "ravi" <[email protected]>
To: [email protected]
Sent: Sunday, March 2, 2014 8:02:12 PM
Subject: [lttng-dev] Support for new arch 'ppc64le'Hi,
We are in the process of adding support for new architecture 'ppc64le' (PowerPC 64 Little Endian) and as part of that, We have worked with libtool maintainer to get alpha release (links below) which has all the needed bits to support building on ppc64le arch. ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.gz(1.6MB) ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.xz(920KB) (A stable libtool release is expected soon this year)
' userspace-rcu-0.8.1' didn't build on 'ppc64le' system because of outdated libtoo.m4/config.guess files.
Latest ' liburcu' source package we picked is from :
http://lttng.org/files/urcu/userspace-rcu-0.8.1.tar.bz2Along with changes to libtool related files, we have found a patch available in ubuntu src repo, which is required to build 'liburcu' successfully on 'ppc64le' system.
Im attaching the same patch which is created on top of "liburcu-0.7.7-1"...
Quoted 4 lines
hence we request you to apply attached patch , and spin off a new version of 'liburcu' using the latest libtool alpha release . So that we can test ppc64le fixes.
Your response is highly appreciated
Hi,
I see that the patch you propose adds both "powerpc64le" and "aarch64" entries. Why are there two of them ?
Moreover, it might be a bit aggressive to package the liburcu tarballs with an alpha version of libtool. When we understand more about the need for one or two specific entries into the configure.ac of liburcu, then we can add them, but until there is a stable version of libtool supporting those, you will probably have to create your own tarballs from the userspace RCU git repository using "make dist" against your alpha libtool.
Thoughts ?
Thanks,
Mathieu
Quoted 8 lines
--
Ravindran
IBM LinuxTechnologyCenter_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
Signature · 3 lines
Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com
_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
Quoted 26 lines · Mathieu Desnoyers
----- Original Message -----
Quoted 16 lines
From: "ravi" <[email protected]>
To: [email protected]
Sent: Sunday, March 2, 2014 8:02:12 PM
Subject: [lttng-dev] Support for new arch 'ppc64le'
Hi,
We are in the process of adding support for new architecture 'ppc64le' (PowerPC 64 Little Endian) and as part of that, We have worked with libtool maintainer to get alpha release (links below) which has all the needed bits to support building on ppc64le arch. ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.gz(1.6MB) ftp://alpha.gnu.org/gnu/libtool/libtool-2.4.2.418.tar.xz(920KB) (A stable libtool release is expected soon this year)
' userspace-rcu-0.8.1' didn't build on 'ppc64le' system because of outdated libtoo.m4/config.guess files.
Latest ' liburcu' source package we picked is from :
http://lttng.org/files/urcu/userspace-rcu-0.8.1.tar.bz2Quoted 8 lines
Along with changes to libtool related files, we have found a patch available in ubuntu src repo, which is required to build 'liburcu' successfully on 'ppc64le' system.
Im attaching the same patch which is created on top of "liburcu-0.7.7-1"... hence we request you to apply attached patch , and spin off a new version of 'liburcu' using the latest libtool alpha release . So that we can test ppc64le fixes.
Your response is highly appreciated
Quoted 3 lines
Hi,
I see that the patch you propose adds both "powerpc64le" and "aarch64" entries. Why are there two of them ?
I think the entry "aarch64" entry is related to arm64 archtype. I will try to contact the original author of the patch and reconfirm.
Quoted 5 lines
Moreover, it might be a bit aggressive to package the liburcu tarballs with an alpha version of libtool. When we understand more about the need for one or two specific entries into the configure.ac of liburcu, then we can add them, but until there is a stable version of libtool supporting those, you will probably have to create your own tarballs from the userspace RCU git repository using "make dist" against your alpha libtool.
okay.
Quoted 14 lines
Thoughts ?
Thanks,
Mathieu
Quoted 7 lines
--
Ravindran
IBM LinuxTechnologyCenter
_______________________________________________
lttng-dev mailing list
[email protected]
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
Signature · 2 lines
Ravindran IBM LinuxTechnologyCenter