First QCA6174 firmware release
I have a new Acer Aspire VN7-591 Laptop with a Qualcom Atheros QCNF344 wireless chip, which is shown by lspci as:
Qualcomm Atheros Device 003e (rev 20)
Subsystem: Foxconn International, Inc. Device e08e
I have installed the linux-next kernel from today 8:00 UTC.
I was able to load the ath10k_pci driver, but the driver complains about missing firmware.
I installed a firmware from here: https://github.com/kvalo/ath10k-firmware
under /lib/firmware/ath10k/QCA6174/hw2.1/
But also the card is not working.
The output from dmesg is:
[ 9360.538767] ath10k_pci 0000:07:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0 [ 9360.788588] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2 [ 9362.729118] ath10k_pci 0000:07:00.0: unable to write to the device [ 9362.729120] ath10k_pci 0000:07:00.0: failed to download normal firmware: -110 [ 9362.729121] ath10k_pci 0000:07:00.0: could not init core (-110) [ 9362.729156] ath10k_pci 0000:07:00.0: could not probe fw (-110)
I would like to know, as Austin Hendrix wrote it at 8 Feb 14:12 2015 too, where can I find the firmware on the
internet / my Windows7 partition and how can I prepare the needed files.
Many thanks,
Olaf
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 2 lines · Olaf Dreyer <olaf <at> dreyero.de> writes:
I have a new Acer Aspire VN7-591 Laptop with a Qualcom Atheros
QCNF344
Quoted 7 lines
wireless chip, which is shown by lspci as:
Qualcomm Atheros Device 003e (rev 20)
Subsystem: Foxconn International, Inc. Device e08eI have installed the linux-next kernel from today 8:00 UTC. I was able to load the
ath10k_pcidriver, but the driver complains
about
Quoted 2 lines
missing firmware.
I installed a firmware from here: https://github.com/kvalo/ath10k-
firmware
Quoted 9 lines
under
/lib/firmware/ath10k/QCA6174/hw2.1/
But also the card is not working.The output from dmesg is:
[ 9360.538767] ath10k_pci 0000:07:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0 [ 9360.788588] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2 [ 9362.729118] ath10k_pci 0000:07:00.0: unable to write to the
device
Quoted 6 lines
[ 9362.729120] ath10k_pci 0000:07:00.0: failed to download normal firmware: -110 [ 9362.729121] ath10k_pci 0000:07:00.0: could not init core (-110) [ 9362.729156] ath10k_pci 0000:07:00.0: could not probe fw (-110)I would like to know, as Austin Hendrix wrote it at 8 Feb 14:12
2015
Quoted 2 lines
too, where can I find the firmware on the
internet / my Windows7 partition and how can I prepare the needed
files.
Quoted 5 lines
Many thanks,
Olaf
Hi did you advance anything on this?
Trying to run a QCA6164 card myself on a Lenovo 3-14 laptop. Sems I've gotten as far as you.
Prepared Ath10k hw2.1 board.bin and firmware-4.bin for hw2.1 using windows binary driver. (And assemble.py, disassemble.py tools linked elsewhere)
Board.bin seems to load and execute fine. But after that when loading firmware-4.bin, it ends up with Unable to write to the device.
I see it starts sending firmware-4.bin and first 256 bytes ce_send fine.
2nd ce_send 256 bytes seem to also ce_send fine, however after that bmi_wait times out. (-110)
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 50 lines · Oscar Rydberg
Quoted 2 lines · Olaf Dreyer <olaf <at> dreyero.de> writes:
I have a new Acer Aspire VN7-591 Laptop with a Qualcom Atheros
QCNF344
Quoted 7 lines
wireless chip, which is shown by lspci as:
Qualcomm Atheros Device 003e (rev 20)
Subsystem: Foxconn International, Inc. Device e08eI have installed the linux-next kernel from today 8:00 UTC. I was able to load the
ath10k_pcidriver, but the driver complainsabout
Quoted 2 lines
missing firmware.
I installed a firmware from here: https://github.com/kvalo/ath10k-firmware
Quoted 9 lines
under
/lib/firmware/ath10k/QCA6174/hw2.1/
But also the card is not working.The output from dmesg is:
[ 9360.538767] ath10k_pci 0000:07:00.0: pci irq msi interrupts 1 irq_mode 0 reset_mode 0 [ 9360.788588] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2 [ 9362.729118] ath10k_pci 0000:07:00.0: unable to write to thedevice
Quoted 6 lines
[ 9362.729120] ath10k_pci 0000:07:00.0: failed to download normal firmware: -110 [ 9362.729121] ath10k_pci 0000:07:00.0: could not init core (-110) [ 9362.729156] ath10k_pci 0000:07:00.0: could not probe fw (-110)I would like to know, as Austin Hendrix wrote it at 8 Feb 14:12
2015
Quoted 2 lines
too, where can I find the firmware on the
internet / my Windows7 partition and how can I prepare the neededfiles.
Quoted 5 lines
Many thanks,
Olaf
Hi did you advance anything on this?
Trying to run a QCA6164 card myself on a Lenovo 3-14 laptop. Sems I've gotten as far as you.
Prepared Ath10k hw2.1 board.bin and firmware-4.bin for hw2.1 using windows binary driver. (Andassemble.py,disassemble.pytools linked elsewhere)
Quoted 8 lines
Board.bin seems to load and execute fine. But after that when loading firmware-4.bin, it ends up with Unable to write to the device.
I see it starts sending firmware-4.bin and first 256 bytes
ce_sendfine.
2ndce_send256 bytes seem to alsoce_sendfine, however after thatbmi_waittimes out. (-110)
You're most likely trying to push something that isn't an actual firmware blob to the device. You might be interested in the other
thread: http://lists.infradead.org/pipermail/ath10k/2015-April/005072.html
Michał
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k