Skip to contentSkip to conversation

ARM: dts: Add LEDs on odroid XU3 board

PATCH RESEND Superseded Markus Reichl 1 participant 1 message Apr 13, 2015

Subsystems (2)
Device tree bindings Arm Samsung Exynos
lore
Share & tools
lore

Markus Reichl

author
#0 lore raw

PATCH RESEND 1/1 ARM: dts: Add LEDs on odroid XU3 board

This patch adds the RGB-LED on XU3 as 3 gpio-leds. It is derived from hardkernel's 3.10 tree.

Tested-by Anand Moon <[email protected]>
Signed-off-by Markus Reichl <[email protected]>
---
 arch/arm/boot/dts/exynos5422-odroidxu3.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
arch/arm/boot/dts/exynos5422-odroidxu3.dts +24 -0
index a519c86..0a32302 100644
@@ -278,6 +278,30 @@
 	rtc at 101E0000 {
 		status = "okay";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		heartbeat {
+			label = "blue:heartbeart";
+			gpios = <&gpb2 2 0>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		eMMC {
+			label = "green:eMMC";
+			gpios = <&gpb2 1 0>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		microSD {
+			label = "red:microSD";
+			gpios = <&gpx2 3 0>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
 };
 
 &hdmi {
Signature · 6 lines
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html