mdstat reporting (superblock & status side-by-side). Can it be changed ?
All,
After looking at the output of /proc/mdstat many times, there is one 'human
factors' (human nature) bit of difficulty with the order of the output (especially with a standard 2-disk raid1 array and 1.2 superblock:
md1 : active raid1 sda7[2] sdb7[1]
52396032 blocks super 1.2 [2/2] [UU]
^^^^^^^^^ When scanning the information quickly to insure you do NOT have 1/2 disks
active in the array, you run into the version and disk information side-by-side.
"1.2 [2/2]"
Which naturally causes a short "huh?..., OK" double-take.
Is there any way from a user standpoint (short of "read a b c d e f"; echo
"$c $d $a $b $e $f"), to rearrange the order the information is reported as:
md1 : active raid1 sda7[2] sdb7[1]
super 1.2 52396032 blocks [2/2] [UU]
That simple change makes glancing down the right-side of the information much
easier on the brain....
I don't think this was ever a concern prior to the 1.2 superbock and I'm not
sure it warrants any brainpower now. However, it was something that stood out to me, so I thought I would pass it along.
Signature · 1 line
David C. Rankin, J.D.,P.E.
Quoted 8 lines · On Sun, 13 Sep 2015 12:58:25 -0500 "David C. Rankin"…
After looking at the output of
/proc/mdstatmany times, there is one 'human
factors' (human nature) bit of difficulty with the order of the output (especially with a standard 2-disk raid1 array and 1.2 superblock:md1 : active raid1 sda7[2] sdb7[1]
52396032 blocks super 1.2 [2/2] [UU] ^^^^^^^^^
Quoted 6 lines
When scanning the information quickly to insure you do NOT have 1/2 disks
active in the array, you run into the version and disk information side-by-side."1.2 [2/2]"
Which naturally causes a short "huh?..., OK" double-take.
For me it does not. 1.2 is clearly different from 1/2, and the actual 2/2 that you have is even enclosed in brackets to stand out more prominently.
Quoted 8 lines
Is there any way from a user standpoint (short of "read a b c d e f"; echo
"$c $d $a $b $e $f"), to rearrange the order the information is reported as:md1 : active raid1 sda7[2] sdb7[1]
super 1.2 52396032 blocks [2/2] [UU]That simple change makes glancing down the right-side of the information much
easier on the brain....
If you want to simplify the mental processing, just look for any "_"s in the string of "U"s which is also conveniently placed at the end of the line. In a partially down RAID1 you'd have [U_] or [_U] there, which is very noticeable compared to the usual [UU].
Quoted 3 lines
I don't think this was ever a concern prior to the 1.2 superbock and I'm not
sure it warrants any brainpower now. However, it was something that stood out to me, so I thought I would pass it along.
I don't think it's justified to randomly change things around which many shell scripts and the like are quite likely to depend on, just out of a personal preference.
Signature · 2 lines
With respect, Roman