leds-bcm6328: add more init configuration options
commit 1d3ff22d633d35048c35c3deeead7ab116cebc32
Author: Álvaro Fernández Rojas <[email protected]> Date: Thu Oct 8 12:35:55 2015 +0200
Documentation: leds: update DT bindings for leds-bcm6328
This patch adds latest DT bindings for leds-bcm6328 init register configuration.
commit 9f82c778ce17789a038351a411ff65cd41033c7a
Author: Álvaro Fernández Rojas <[email protected]> Date: Thu Oct 8 12:35:54 2015 +0200
leds-bcm6328: add more init configuration options
This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.
This was not a backwards-compatible change, because the driver is now turning off all of the serial LED options by default when previously it only turned off brcm,serial-leds and left the other options unchanged.
There are currently no in-tree users of this binding, so any existing users will be broken by this change.
Signature · 1 line
Simon Arlott
Hi Simon,
Quoted 21 lines · Simon Arlott
commit
1d3ff22d633d35048c35c3deeead7ab116cebc32Author: Álvaro Fernández Rojas <[email protected]> Date: Thu Oct 8 12:35:55 2015 +0200Documentation: leds: update DT bindings for leds-bcm6328
This patch adds latest DT bindings for leds-bcm6328 init register configuration.
commit
9f82c778ce17789a038351a411ff65cd41033c7aAuthor: Álvaro Fernández Rojas <[email protected]> Date: Thu Oct 8 12:35:54 2015 +0200leds-bcm6328: add more init configuration options
This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.
Quoted 8 lines
This was not a backwards-compatible change, because the driver is now turning off all of the serial LED options by default when previously it only turned off brcm,serial-leds and left the other options unchanged.
There are currently no in-tree users of this binding, so any existing users will be broken by this change.
Please submit a patch fixing the issue in such cases, so that we could discuss possible solutions to the problem.
Signature · 2 lines
Best Regards, Jacek Anaszewski
Hi Simon and Jacek,
This is done on purpose because not every BCM63268 device has serial LEDs and we should be able to enable/disable those options in order to avoid depending on the bootloader setting the registers correctly.
Regards,
Álvaro.
Quoted 29 lines · Jacek Anaszewski
Hi Simon,
Quoted 26 lines · Simon Arlott
commit
1d3ff22d633d35048c35c3deeead7ab116cebc32Author: Álvaro Fernández Rojas <[email protected]> Date: Thu Oct 8 12:35:55 2015 +0200Documentation: leds: update DT bindings for leds-bcm6328
This patch adds latest DT bindings for leds-bcm6328 init register configuration.
commit
9f82c778ce17789a038351a411ff65cd41033c7aAuthor: Álvaro Fernández Rojas <[email protected]> Date: Thu Oct 8 12:35:54 2015 +0200leds-bcm6328: add more init configuration options
This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.This was not a backwards-compatible change, because the driver is now turning off all of the serial LED options by default when previously it only turned off brcm,serial-leds and left the other options unchanged.
Quoted 7 lines
Quoted 3 lines
There are currently no in-tree users of this binding, so any existing users will be broken by this change.
Please submit a patch fixing the issue in such cases, so that we could discuss possible solutions to the problem.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html