Building java
Someone in our project decided he wanted Java on the board, so I just added "meta-java" to the layers and attempted to follow the README.
So without a clue as to what I'm really doing (I haven't touched Java in 15 years) I added these to my local.conf:
# Headless javaPREFERRED_PROVIDER_classpath = "classpath-minimal"
# Possible provider: cacao-initial-native and jamvm-initial-native PREFERRED_PROVIDER_virtual/java-initial-native = "cacao-initial-native" # Possible provider: cacao-native and jamvm-native PREFERRED_PROVIDER_virtual/java-native = "jamvm-native"
And of course added meta-java to bblayers.conf.
I added "openjdk-8" to the image's things to install, and let things build.
While building "openjdk-8-native", things went south, and I get the following error message:
ERROR: no configure script found at /home/mike/projects/.../build/tmp-glibc/work/x86_64-linux/openjdk-8-native/72b05-r0/jdk8u-e8bed1496ff2/configure
What did I do wrong?
(Note: the board does not have a display, so I don't need/want x11. I tried building openjdk-7 instead, but that fails to parse because it requires x11 in the distro)
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
Quoted 16 lines
Am 08.01.2016 um 08:39 schrieb Mike Looijmans <[email protected]>:
Someone in our project decided he wanted Java on the board, so I just added "meta-java" to the layers and attempted to follow the README.
So without a clue as to what I'm really doing (I haven't touched Java in 15 years) I added these to my local.conf:
# Headless java
PREFERRED_PROVIDER_classpath= "classpath-minimal"
# Possible provider: cacao-initial-native and jamvm-initial-native PREFERRED_PROVIDER_virtual/java-initial-native = "cacao-initial-native" # Possible provider: cacao-native and jamvm-native PREFERRED_PROVIDER_virtual/java-native = "jamvm-native"And of course added meta-java to bblayers.conf.
Quoted 8 lines
I added "openjdk-8" to the image's things to install, and let things build.
While building "openjdk-8-native", things went south, and I get the following error message:
ERROR: no configure script found at
/home/mike/projects/.../build/tmp-glibc/work/x86_64-linux/openjdk-8-native/72b05-r0/jdk8u-e8bed1496ff2/configureWhat did I do wrong?
meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch
Quoted 1 line
(Note: the board does not have a display, so I don't need/want x11. I tried building openjdk-7 instead, but that fails to parse because it requires x11 in the distro)
You could port the remove-x11-patches to openjdk-7, since we currently need Java8, I have no "business case" to fix openjdk-7 :/
Cheers
--
Jens Rehsack - [email protected]
On 08-01-16 10:48, Jens Rehsack wrote:
...
Quoted 4 lines
Quoted 1 line
What did I do wrong?
meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch
Current master is borked, it won't parse because about a dozen recipes need QT4 things that have been removed.
...
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
Quoted 11 lines
Am 08.01.2016 um 11:21 schrieb Mike Looijmans <[email protected]>:
On 08-01-16 10:48, Jens Rehsack wrote:
...Quoted 4 lines
Quoted 1 line
What did I do wrong?
meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch
Current master is borked, it won't parse because about a dozen recipes need QT4 things that have been removed.
cherry-pick fe506edd from poky/master
Cheers
--
Jens Rehsack - [email protected]
Quoted 5 lines · Jens Rehsack
Quoted 5 lines
Am 08.01.2016 um 11:21 schrieb Mike Looijmans <[email protected]>:
On 08-01-16 10:48, Jens Rehsack wrote:
...
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
What did I do wrong?
meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch
Current master is borked, it won't parse because about a dozen recipes need QT4 things that have been removed.
cherry-pick
fe506eddfrom poky/master
Ran into too much trouble with oe-core, I'll wait until the dust has settled.
For now, I just added x11 to the DISTRO_FEATURES and built version 7 which runs okay on the board.
I'm puzzled by this message though:
NOTE: multiple providers are available for runtime java2-runtime (cacao, openjre-8, jamvm, openjdk-7-jre, openjdk-8)
NOTE: consider defining a PREFERRED_PROVIDER entry to match java2-runtime
To prevent picking another package, I tried adding:
PREFERRED_PROVIDER_java2-runtime = "openjdk-7-jre"
But that did not make the message go away.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com
Please consider the environment before printing this e-mail
Quoted 18 lines · Jens Rehsack
Quoted 18 lines
Am 08.01.2016 um 08:39 schrieb Mike Looijmans <[email protected]>:
Someone in our project decided he wanted Java on the board, so I just added "meta-java" to the layers and attempted to follow the README.
So without a clue as to what I'm really doing (I haven't touched Java in 15 years) I added these to my local.conf:
# Headless java
PREFERRED_PROVIDER_classpath= "classpath-minimal"
# Possible provider: cacao-initial-native and jamvm-initial-native PREFERRED_PROVIDER_virtual/java-initial-native = "cacao-initial-native" # Possible provider: cacao-native and jamvm-native PREFERRED_PROVIDER_virtual/java-native = "jamvm-native"And of course added meta-java to bblayers.conf.
I added "openjdk-8" to the image's things to install, and let things build.
Quoted 8 lines
Quoted 6 lines
While building "openjdk-8-native", things went south, and I get the following error message:
ERROR: no configure script found at
/home/mike/projects/.../build/tmp-glibc/work/x86_64-linux/openjdk-8-native/72b05-r0/jdk8u-e8bed1496ff2/configureWhat did I do wrong?
meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch
I was close to master already, but apparently not close enough.
Upgrading everything to current master results in:
ERROR: ParseError at /home/mike/projects/.../meta-oe/meta-oe/recipes-extended/sip/sip_4.16.4.bb:19: Could not inherit file classes/qmake2.bbclass
Quoted 4 lines
Quoted 2 lines
(Note: the board does not have a display, so I don't need/want x11. I tried building openjdk-7 instead, but that fails to parse because it requires x11 in the distro)
You could port the remove-x11-patches to openjdk-7, since we currently need Java8, I have no "business case" to fix openjdk-7 :/
I don't care either, I'm happy when "helloworld.java" runs on target.
Kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com
Please consider the environment before printing this e-mail