Skip to contentSkip to conversation

Building java

DISCUSSION Mike Looijmans 2 participants 6 messages Jan 8, 2016

lore
Share & tools
lore
#0 lore raw

Someone in our project decided he wanted Java on the board, so I just added "meta-java" to the layers and attempted to follow the README.

So without a clue as to what I'm really doing (I haven't touched Java in 15 years) I added these to my local.conf:

# Headless java
PREFERRED_PROVIDER_classpath = "classpath-minimal"
# Possible provider: cacao-initial-native and jamvm-initial-native PREFERRED_PROVIDER_virtual/java-initial-native = "cacao-initial-native" # Possible provider: cacao-native and jamvm-native PREFERRED_PROVIDER_virtual/java-native = "jamvm-native"

And of course added meta-java to bblayers.conf.

I added "openjdk-8" to the image's things to install, and let things build.

While building "openjdk-8-native", things went south, and I get the following error message:

ERROR: no configure script found at /home/mike/projects/.../build/tmp-glibc/work/x86_64-linux/openjdk-8-native/72b05-r0/jdk8u-e8bed1496ff2/configure

What did I do wrong?

(Note: the board does not have a display, so I don't need/want x11. I tried building openjdk-7 instead, but that fails to parse because it requires x11 in the distro)

Kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com

Please consider the environment before printing this e-mail

#1 lore raw
Quoted 16 lines

Am 08.01.2016 um 08:39 schrieb Mike Looijmans <[email protected]>:

Someone in our project decided he wanted Java on the board, so I just added "meta-java" to the layers and attempted to follow the README.

So without a clue as to what I'm really doing (I haven't touched Java in 15 years) I added these to my local.conf:

# Headless java
PREFERRED_PROVIDER_classpath = "classpath-minimal"
# Possible provider: cacao-initial-native and jamvm-initial-native PREFERRED_PROVIDER_virtual/java-initial-native = "cacao-initial-native" # Possible provider: cacao-native and jamvm-native PREFERRED_PROVIDER_virtual/java-native = "jamvm-native"

And of course added meta-java to bblayers.conf.

Quoted 8 lines

I added "openjdk-8" to the image's things to install, and let things build.

While building "openjdk-8-native", things went south, and I get the following error message:

ERROR: no configure script found at /home/mike/projects/.../build/tmp-glibc/work/x86_64-linux/openjdk-8-native/72b05-r0/jdk8u-e8bed1496ff2/configure

What did I do wrong?

meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch

Quoted 1 line

(Note: the board does not have a display, so I don't need/want x11. I tried building openjdk-7 instead, but that fails to parse because it requires x11 in the distro)

You could port the remove-x11-patches to openjdk-7, since we currently need Java8, I have no "business case" to fix openjdk-7 :/

Cheers
--
Jens Rehsack - [email protected]

#2 lore raw

On 08-01-16 10:48, Jens Rehsack wrote:
...

Quoted 4 lines
Quoted 1 line

What did I do wrong?

meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch

Current master is borked, it won't parse because about a dozen recipes need QT4 things that have been removed.

...

Kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com

Please consider the environment before printing this e-mail

#5 lore raw
In reply to Jens Rehsack
Quoted 18 lines · Jens Rehsack
Quoted 18 lines

Am 08.01.2016 um 08:39 schrieb Mike Looijmans <[email protected]>:

Someone in our project decided he wanted Java on the board, so I just added "meta-java" to the layers and attempted to follow the README.

So without a clue as to what I'm really doing (I haven't touched Java in 15 years) I added these to my local.conf:

# Headless java
PREFERRED_PROVIDER_classpath = "classpath-minimal"
# Possible provider: cacao-initial-native and jamvm-initial-native PREFERRED_PROVIDER_virtual/java-initial-native = "cacao-initial-native" # Possible provider: cacao-native and jamvm-native PREFERRED_PROVIDER_virtual/java-native = "jamvm-native"

And of course added meta-java to bblayers.conf.

I added "openjdk-8" to the image's things to install, and let things build.

Quoted 8 lines
Quoted 6 lines

While building "openjdk-8-native", things went south, and I get the following error message:

ERROR: no configure script found at /home/mike/projects/.../build/tmp-glibc/work/x86_64-linux/openjdk-8-native/72b05-r0/jdk8u-e8bed1496ff2/configure

What did I do wrong?

meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch

I was close to master already, but apparently not close enough.

Upgrading everything to current master results in:

ERROR: ParseError at /home/mike/projects/.../meta-oe/meta-oe/recipes-extended/sip/sip_4.16.4.bb:19: Could not inherit file classes/qmake2.bbclass

Quoted 4 lines
Quoted 2 lines

(Note: the board does not have a display, so I don't need/want x11. I tried building openjdk-7 instead, but that fails to parse because it requires x11 in the distro)

You could port the remove-x11-patches to openjdk-7, since we currently need Java8, I have no "business case" to fix openjdk-7 :/

I don't care either, I'm happy when "helloworld.java" runs on target.

Kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com

Please consider the environment before printing this e-mail

#3 lore raw
In reply to Mike Looijmans
Quoted 11 lines

Am 08.01.2016 um 11:21 schrieb Mike Looijmans <[email protected]>:

On 08-01-16 10:48, Jens Rehsack wrote:
...

Quoted 4 lines
Quoted 1 line

What did I do wrong?

meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch

Current master is borked, it won't parse because about a dozen recipes need QT4 things that have been removed.

cherry-pick fe506edd from poky/master

Cheers
--
Jens Rehsack - [email protected]

#4 lore raw
Quoted 5 lines · Jens Rehsack
Quoted 5 lines

Am 08.01.2016 um 11:21 schrieb Mike Looijmans <[email protected]>:

On 08-01-16 10:48, Jens Rehsack wrote:
...

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 1 line

What did I do wrong?

meta-java is master, so you need poky on master, too - or cherry-pick the autotools.bbclass patch

Current master is borked, it won't parse because about a dozen recipes need QT4 things that have been removed.

cherry-pick fe506edd from poky/master

Ran into too much trouble with oe-core, I'll wait until the dust has settled.

For now, I just added x11 to the DISTRO_FEATURES and built version 7 which runs okay on the board.

I'm puzzled by this message though:

NOTE: multiple providers are available for runtime java2-runtime (cacao, openjre-8, jamvm, openjdk-7-jre, openjdk-8)
NOTE: consider defining a PREFERRED_PROVIDER entry to match java2-runtime

To prevent picking another package, I tried adding:

PREFERRED_PROVIDER_java2-runtime = "openjdk-7-jre"

But that did not make the message go away.

Kind regards,

Mike Looijmans
System Expert

TOPIC Embedded Products
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: +31 (0) 499 33 69 79
E-mail: [email protected]
Website: www.topicproducts.com

Please consider the environment before printing this e-mail