ext4 unknown problem
A message that is not in the archive (sent off-list or not yet received): 711984996.179701343729808563.JavaMail.root@shiva
I have used strace on described process (sync and umount):
This is "sudo sync" proces:
$ sudo strace -p 24933 Process 24933 attached select(6, [3 5], [], NULL, NULL
This one is umount:
$ sudo strace -p 12103 Process 12103 attached
By for now.
Quoted 94 lines · ----- [email protected] wrote:
Hi,
dmesg is probably useles:Probably some logs after mounting...:
# dmesg | grep EXT EXT3-fs (md2): mounted filesystem with ordered data mode EXT3-fs (md2): using internal journal EXT3-fs (dm-2): using internal journal EXT3-fs (dm-2): mounted filesystem with ordered data mode EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (dm-12): mounted filesystem without journal. Opts: (null) EXT4-fs (dm-8): re-mounted. Opts: commit=0 EXT4-fs (dm-3): re-mounted. Opts: commit=0 EXT4-fs (dm-12): re-mounted. Opts: commit=0 EXT4-fs (dm-28): mounted filesystem with ordered data mode. Opts: (null) EXT3-fs (dm-10): using internal journal EXT3-fs (dm-10): mounted filesystem with ordered data modeOn last few lines, there is some info about usb key used on thic pc:
# dmesg | tail -n 30 sd 14:0:0:0: [sdg] Asking for cache data failed sd 14:0:0:0: [sdg] Assuming drive cache: write through sdg: sdg1 sd 14:0:0:0: [sdg] Asking for cache data failed sd 14:0:0:0: [sdg] Assuming drive cache: write through sd 14:0:0:0: [sdg] Attached SCSI disk mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! usb 2-4.4: USB disconnect, device number 10 hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. usb 1-1: new high-speed USB device number 2 using ehci_hcd usb 1-1: New USB device found, idVendor=0951, idProduct=1687 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: DT R400 usb 1-1: Manufacturer: Kingston usb 1-1: SerialNumber: 0018F30C7FX10B000XX029 scsi15 : usb-storage 1-1:1.0 scsi 15:0:0:0: Direct-Access Kingston DT R400 PMAP PQ: 0 ANSI: 0 CCS sd 15:0:0:0: Attached scsi generic sg6 type 0 sd 15:0:0:0: [sdg] 7774208 512-byte logical blocks: (3.98 GB/3.70 GiB) sd 15:0:0:0: [sdg] Write Protect is off sd 15:0:0:0: [sdg] Mode Sense: 23 00 00 00 sd 15:0:0:0: [sdg] No Caching mode page present sd 15:0:0:0: [sdg] Assuming drive cache: write through sd 15:0:0:0: [sdg] No Caching mode page present sd 15:0:0:0: [sdg] Assuming drive cache: write through sdg: sdg1 sdg2 sd 15:0:0:0: [sdg] No Caching mode page present sd 15:0:0:0: [sdg] Assuming drive cache: write through sd 15:0:0:0: [sdg] Attached SCSI removable diskOther lines from dmesg seems not relevant. Should I post them too?
PS: Writing to disk from jbd2/dm-3-8 still active (iotop shows it still on top of I/O activity).
LuVar
Quoted 3 lines · ----- "Theodore Ts'o
Quoted 2 lines · LuVar
Hi,
I have seriouse issue here. I have copyied about 7GB files to oneof
Quoted 2 lines
my ext4 partitions and from that point of time there is sustained write to that partition from jbd2/dm-3-8 process. I have lunched
"sudo
Quoted 1 line
sync" command (about day ago :) and a few hours a after sync start,
I
Quoted 1 line
have tryied to use umount on that partition... Booth of them are
still
Quoted 8 lines
running...
Quoted 2 lines
I have no serious data there, but if I could be helpfull in
bugreport, give me some info what to do.
Try running the dmesg command, and see if there's anything interesting
there. If you're not sure if it's interesting, send it to us andwe
Quoted 5 lines
can take a quick look at it.
Regards,
- Ted
Signature · 8 lines
Ing. Ľubomír Varga +421 (0)908 541 700 [email protected] www.plaintext.sk -- To unsubscribe from this list: send the line "unsubscribe linux-ext4" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html