Skip to contentSkip to conversation

ext4 unknown problem

DISCUSSION Ľubomír Varga 1 participant 1 message Jul 31, 2012 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

I have used strace on described process (sync and umount):

This is "sudo sync" proces:

$ sudo strace -p 24933
Process 24933 attached
select(6, [3 5], [], NULL, NULL

This one is umount:

$ sudo strace -p 12103
Process 12103 attached

By for now.

Quoted 94 lines · ----- [email protected] wrote:

Hi,
dmesg is probably useles:

Probably some logs after mounting...:

# dmesg | grep EXT
EXT3-fs (md2): mounted filesystem with ordered data mode
EXT3-fs (md2): using internal journal
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:
(null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
EXT4-fs (dm-12): mounted filesystem without journal. Opts: (null)
EXT4-fs (dm-8): re-mounted. Opts: commit=0
EXT4-fs (dm-3): re-mounted. Opts: commit=0
EXT4-fs (dm-12): re-mounted. Opts: commit=0
EXT4-fs (dm-28): mounted filesystem with ordered data mode. Opts:
(null)
EXT3-fs (dm-10): using internal journal
EXT3-fs (dm-10): mounted filesystem with ordered data mode

On last few lines, there is some info about usb key used on thic pc:

# dmesg | tail -n 30
sd 14:0:0:0: [sdg] Asking for cache data failed
sd 14:0:0:0: [sdg] Assuming drive cache: write through
 sdg: sdg1
sd 14:0:0:0: [sdg] Asking for cache data failed
sd 14:0:0:0: [sdg] Assuming drive cache: write through
sd 14:0:0:0: [sdg] Attached SCSI disk
mdadm: sending ioctl 1261 to a partition!
mdadm: sending ioctl 1261 to a partition!
usb 2-4.4: USB disconnect, device number 10
hda-intel: IRQ timing workaround is activated for card #0. Suggest a
bigger bdl_pos_adj.
usb 1-1: new high-speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=0951, idProduct=1687
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: DT R400
usb 1-1: Manufacturer: Kingston
usb 1-1: SerialNumber: 0018F30C7FX10B000XX029
scsi15 : usb-storage 1-1:1.0
scsi 15:0:0:0: Direct-Access     Kingston DT R400          PMAP PQ: 0
ANSI: 0 CCS
sd 15:0:0:0: Attached scsi generic sg6 type 0
sd 15:0:0:0: [sdg] 7774208 512-byte logical blocks: (3.98 GB/3.70
GiB)
sd 15:0:0:0: [sdg] Write Protect is off
sd 15:0:0:0: [sdg] Mode Sense: 23 00 00 00
sd 15:0:0:0: [sdg] No Caching mode page present
sd 15:0:0:0: [sdg] Assuming drive cache: write through
sd 15:0:0:0: [sdg] No Caching mode page present
sd 15:0:0:0: [sdg] Assuming drive cache: write through
 sdg: sdg1 sdg2
sd 15:0:0:0: [sdg] No Caching mode page present
sd 15:0:0:0: [sdg] Assuming drive cache: write through
sd 15:0:0:0: [sdg] Attached SCSI removable disk

Other lines from dmesg seems not relevant. Should I post them too?

PS: Writing to disk from jbd2/dm-3-8 still active (iotop shows it still on top of I/O activity).

LuVar

Quoted 3 lines · ----- "Theodore Ts'o
Quoted 2 lines · LuVar

Hi,
I have seriouse issue here. I have copyied about 7GB files to one

of

Quoted 2 lines

my ext4 partitions and from that point of time there is sustained write to that partition from jbd2/dm-3-8 process. I have lunched

"sudo

Quoted 1 line

sync" command (about day ago :) and a few hours a after sync start,

I

Quoted 1 line

have tryied to use umount on that partition... Booth of them are

still

Quoted 8 lines

running...

Quoted 2 lines

I have no serious data there, but if I could be helpfull in

bugreport, give me some info what to do.

Try running the dmesg command, and see if there's anything interesting
there. If you're not sure if it's interesting, send it to us and

we

Quoted 5 lines

can take a quick look at it.

Regards,

- Ted

Signature · 8 lines
Ing. Ľubomír Varga
+421 (0)908 541 700
[email protected]
www.plaintext.sk
--
To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html