lspci != scanpci !?
In the kernel config I have aktivate the direct pci-access.
Matthew Dharm <[email protected]> schrieb am 14.01.05 23:37:23:
Quoted 27 lines · Enrico Bartky
Hello,
I have a Gigabyte GA-5AA Board with ALi Aladdin IV Chipset ( 1533, 1541 ). I tried to get the smbus to work, but Gigabyte have disabled it and I can't activate it in the BIOS. I use kernel 2.6.10 and looked at the m7101-hotplug for kernel 2.4-module from
lm_sensors. I added the following todrivers/pci/quirks.c:....
/* ALi 1533 fixup to enable the M7101 SMBus Controller
* ported from prog/hotplug of thelm_sensors
* package
*/
static void__devinitquirk_ali1533_smbus(struct pci_dev *dev){
u8 val = 0;
pci_read_config_byte( dev,0x5F, &val );
if ( val &0x4)
{pci_write_config_byte( dev,0x5F, val &0xFB);
}
}DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_ali1533_smbus );
....
Quoted 3 lines
Now the scanpci command shows the M7101 BUT lspci and
/proc/pci,/proc/bus/pci,/sys/bus/pciNOT. What can I do? Is there anything like a "update_pci" command?
I think there is a kernel command-line parameter you can use to tell the kernel to ignore the BIOS-supplied PCI map and generate it's own via scanning (ala what scanpci does).
Matt
Signature · 12 lines
Matthew Dharm Home: [email protected] Maintainer, Linux USB Mass Storage Driver Department of Justice agent. I have come to purify the flock. -- DOJ agent User Friendly, 5/22/1998 __________________________________________________________ Mit WEB.DE FreePhone mit hoechster Qualitaet ab 0 Ct./Min. weltweit telefonieren! http://freephone.web.de/?mc=021201