: I can't make the emulation of /dev/dsp work; the driver "executes" but reports errors; there is no sound output.
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=763>
======================================================================
Reported By: lovett
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 763 Category: CORE OSS - pcm Reproducibility: always Severity: major Priority: normal Status: new Distribution: Kernel Version: ====================================================================== Date Submitted: 12-30-2004 22:48 CET Last Modified: 01-14-2005 17:25 CET
======================================================================
Summary: I can't make the emulation of /dev/dsp work; the
driver "executes" but reports errors; there is no sound output. Description:
I have a "Sound Blaster" card. /proc/asound/cards says:
0 [Live ]: EMU10K1 - Sound Blaster Live!
Sound Blaster Live! (rev.8, serial:0x80641102) at
0x8c00, irq 23
======================================================================
----------------------------------------------------------------------
lovett - 01-03-05 23:35
----------------------------------------------------------------------
I think most of the original description of my report was truncated by the boxes I was given.
I have attached a file "dspFailure" that describes the configuration of my machine
and the experiences with TiMidity, alsamidi, etc. + the syslog entries that
complain about "errors".
That file ends with a listing of output from "amixer content" that I included to
indicate that I thought the mixer levels were non-zero. The listing contains
an error that I just rechecked: PCM output voluem = 20,20, not the 0,0 I originally mistyped.
----------------------------------------------------------------------
lovett - 01-14-05 17:25
----------------------------------------------------------------------
The ALSA installation consisted of going through the ./configure | make | make install sequence with the follow packages: alsa-driver-1.0.8rc1 alsa-lib-1.0.8rc1 alsa-utils-1.0.8rc1 alsa-oss-1.0.8rc1
All compiled and installed without complaint.
Booting produced this error message:
kernel: Error seeking in /dev/kmem Symbol #snd-page-alloc, value002c4000
kernel: Error adding kernel module table entry.
Loading all the ALSA modules ==> this error message (repeated twice):
modprobe: modprobe: Can't locate module snd-seq-client-62
Issue History
Date Modified Username Field Change
======================================================================
12-30-04 22:48 lovett New Issue 01-03-05 12:05 tiwai Note Added: 0003052 01-03-05 18:12 lovett File Added: dspFailure 01-03-05 23:35 lovett Note Added: 0003076 01-14-05 17:25 lovett Note Added: 0003208
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt