Skip to contentSkip to conversation

mvme5100 one more time...

DISCUSSION Brian Waite 2 participants 2 messages Sep 4, 2001 1 message not in the archive

lore
Share & tools
lore
#1 lore raw
In reply to a message not in the archive

Xavier,
Just a quick sanity check, are all the jumpers at factory default and have
you changed any env settings? Just a thought.

Thanks
Brian

Quoted 40 lines · you

Le sam, 01 sep 2001 01:29:04, Tom Rini a
écrit :

Quoted 5 lines

And if this fails, I just thought of one more thing (I need some hw I can test this on locally...).
Look for:
bl flush_instruction_cache
And add #if 0/#endif around that and try again...

I have done a pull this morning and applied your patchs. I have the same results even
after the bl flush_instruction_cache suppression.

Here is the result :
Network Boot File load in progress... To abort hit <BREAK>

Bytes Received =&701661, Bytes Loaded =&701661
Bytes/Second =&701661, Elapsed Time =1 Second(s)

Exception: Program (Illegal Instruction) SRR0 =001F0000 SRR1 =00083040 Vector-Offset =00700

IP     =001F0000 MSR    =00003040 CR     =00000000 FPSCR  =00000000
R0     =00000000 R1     =03F00000 R2     =00000000 R3     =00000000
R4     =00000000 R5     =49504C01 R6     =00007000 R7     =001F0000
R8     =03F0CF54 R9     =03F0CD54 R10    =03F0CD60 R11    =03F0CE54
R12    =03F0CE54 R13    =00000000 R14    =00000000 R15    =00000000
R16    =00000000 R17    =00000000 R18    =00000000 R19    =00000000
R20    =00000000 R21    =00000000 R22    =00000000 R23    =00000000
R24    =00000000 R25    =00000000 R26    =00000000 R27    =00000000
R28    =00000000 R29    =00000000 R30    =00000000 R31    =00000000
SPR0   =00000000 SPR1   =00000000 SPR8   =00000000 SPR9   =00000000

001F0000 00040000 WORD $00040000

The board don't have any disk or system for the moment, perhaps this is the problem ?
I just want to try to boot now... Because I have also a mvme2303 with a whole debian
system on it. So if I have a kernel for the mvme5100 I will only need to put my
SCSI PMC to have a complete system.

Quoted 1 line

O+ xavier

--
Brian Waite

Looking for a TeraFLOP in a closet
www.fastcluster.com

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
Quoted 6 lines · Brian Waite

Xavier,
Just a quick sanity check, are all the jumpers at factory default
and have
you changed any env settings? Just a thought.

Hi Brian,

I don't have change any jumper or env variables.
Do I need to do so to boot with a tftp server ?

Thanks for your hint.

Xavier
--
33 (0) 1 69 15 79 59
De chacun selon ses forces, a chacun selon ses besoins

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/