Skip to contentSkip to conversation

flooded by "CPU#0: Running in modulated clock mode"

DISCUSSION Zwane Mwaikambo 2 participants 5 messages Apr 21, 2004 – Apr 25, 2004 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 8 lines · Alexey Mahotkin

Is that ok that the status is flapping?

Quoted 3 lines
Quoted 3 lines

CPU#0: Running in modulated clock mode
CPU#0: Temperature/speed normal
CPU#0: Temperature above threshold

Or is it so that CPU switches to MCM, instantly cools down, switches to normal speed, instantly heats up and so on?

Yes it doesn't modulate indefinitely, it means that your cooling is inadequate.

Quoted 7 lines
Quoted 3 lines

The threshold is set so that its below the
catastrophic shutdown threshold. so ~60C sounds right considering your processor will probably shutdown at 80C.

Who did set that threshold and how could I change it? I'd like it to be ~72C, because the machine is 1U and the higher temperature is kind of "normal" there.

If i recall correctly it's hardware set, i'm not sure if BIOSes can modify that these days. One thing you may want to note is that in the modulated state the processor doesn't process interrupts and runs at a 50% clock duty cycle. So there is a large performance loss when its running in this mode. You really should consider looking into your cooling...

#4 lore raw

Hi!

Quoted 3 lines

If i recall correctly it's hardware set, i'm not sure if BIOSes can modify that these days. One thing you may want to note is that in the modulated state the processor doesn't process interrupts and runs at a 50% clock

No interrupts? That would mean almost dead machine. Are you sure?

Signature · 1 line
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms         
#5 lore raw
Quoted 9 lines · Pavel Machek

Hi!

Quoted 3 lines

If i recall correctly it's hardware set, i'm not sure if BIOSes can modify that these days. One thing you may want to note is that in the modulated state the processor doesn't process interrupts and runs at a 50% clock

No interrupts? That would mean almost dead machine. Are you sure?

Yep, it's normally 50% modulation for 1ms or until the temperature drops below threshold, whichever comes first with interrupts remaining pending.

#6 lore raw

Hi!

Quoted 9 lines
Quoted 6 lines
Quoted 3 lines

If i recall correctly it's hardware set, i'm not sure if BIOSes can modify that these days. One thing you may want to note is that in the modulated state the processor doesn't process interrupts and runs at a 50% clock

No interrupts? That would mean almost dead machine. Are you sure?

Yep, it's normally 50% modulation for 1ms or until the temperature drops below threshold, whichever comes first with interrupts remaining pending.

Ok, but that means (assuming machine is above treshold all the time) that interrupts are only delayed by milisecond, and that machine does no usefull work 50% of time, right?
Pavel

Signature · 2 lines
When do you have a heart between your knees?
[Johanka's followup: and *two* hearts?]
#7 lore raw

Hi Pavel,

Quoted 7 lines · Pavel Machek
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines

If i recall correctly it's hardware set, i'm not sure if BIOSes can modify that these days. One thing you may want to note is that in the modulated state the processor doesn't process interrupts and runs at a 50% clock

No interrupts? That would mean almost dead machine. Are you sure?

Quoted 6 lines
Quoted 2 lines

Yep, it's normally 50% modulation for 1ms or until the temperature drops below threshold, whichever comes first with interrupts remaining pending.

Ok, but that means (assuming machine is above treshold all the time) that interrupts are only delayed by milisecond, and that machine does no usefull work 50% of time, right?

Correct, it's actually not that observable on a non heavily loaded system.