Skip to contentSkip to conversation

BDI config file - MPC8360e issue

U-Boot-Users agnel juni 2 participants 2 messages Feb 13, 2007

lore
Share & tools
lore

agnel juni

author
#0 lore raw

Hi:

I am working with a MPC8360EA MDS processor board with Rev2.0 silicon and DDR2 memory in it.

I need to program the flash with u-boot using BDI2000. I downloaded the BDI config gile from the following FTP site as susggested in the mailing list.

ftp://83.125.32.26/bdigdb/config/powerpc/mpc83xx/

I verified the DDR2 parameters from u-boot and it matches the configuration section of the BDI config file too.

The board has 32MB Spansion flash in it (S29GL256N). But when I connect the BDI to the board , BDI keeps resettingthe board with the following error.

/****************************************************************/
TARGET: Target PVR is 0x80830030
- TARGET: resetting target passed
- TARGET: processing target startup ....
- COP status is 0x01
- Target PVR is 0x80830030
- BDI tries to resynch TAP
- COP status is 0x21
- Target PVR is 0x00000000
*** TARGET: processing target startup failed
# PPC: timeout while waiting for freeze
- TARGET: target will be restarted in 10 sec /**************************************************************/

Any suggestions to solve this issue would be appreciated.

Thanks
Junita

__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070214/39bd8d95/attachment.htm

#1 lore raw

I had this same situation on our custom board with an MPC8358E. It was caused by the Reset Configuration Words not being loaded. In my case, the RCW's come from the flash, which had not been programmed yet. You could try un-commenting the "RCW" line in the BDI config file so that the BDI sets the reset configuration words.

Steve

Quoted 58 lines · agnel juni

Hi:

I am working with a MPC8360EA MDS processor board with Rev2.0 silicon and DDR2 memory in it.

I need to program the flash with u-boot using BDI2000. I downloaded the BDI config gile from the following FTP site as susggested in the mailing list.

ftp://83.125.32.26/bdigdb/config/powerpc/mpc83xx/

I verified the DDR2 parameters from u-boot and it matches the configuration section of the BDI config file too.

The board has 32MB Spansion flash in it (S29GL256N). But when I connect the BDI to the board , BDI keeps resettingthe board with the following error.

/****************************************************************/
TARGET: Target PVR is 0x80830030
- TARGET: resetting target passed
- TARGET: processing target startup ....
- COP status is 0x01
- Target PVR is 0x80830030
- BDI tries to resynch TAP
- COP status is 0x21
- Target PVR is 0x00000000
*** TARGET: processing target startup failed
# PPC: timeout while waiting for freeze
- TARGET: target will be restarted in 10 sec /**************************************************************/

Any suggestions to solve this issue would be appreciated.

Thanks
Junita

------------------------------------------------------------------------
Heres a new way to find what you're looking for - Yahoo! Answers
<http://us.rd.yahoo.com/mail/in/yanswers/*http://in.answers.yahoo.com/>

------------------------------------------------------------------------

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

------------------------------------------------------------------------

_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users

Signature · 6 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Steve Hein (ssh at sgi.com)              Engineering Diagnostics/Software
Silicon Graphics, Inc.                          
1168 Industrial Blvd.                 Phone: (715) 726-8410
Chippewa Falls, WI 54729              Fax:   (715) 726-6715
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~