Skip to contentSkip to conversation

HDSP - snd-hdsp.o: init_module: No such device

DISCUSSION Thomas Charbonnel 2 participants 2 messages May 17, 2002

lore
Share & tools
lore
#0 lore raw

Hi,
I was very excited and pleased to see hdsp driver had reached cvs (thank you Paul !) , so I gave it a try. Here are the results.
I manage to insmod everything needed except the snd-hdsp module. I get the following in syslog:

May 16 12:11:18 satellite kernel: RME Hammerfall-DSP: no cards found
May 16 12:15:36 satellite kernel: ALSA 
../../alsa-kernel/pci/rme9652/hdsp.c:455: Hammerfall-DSP: no Digiface or 
Multiface connected!
May 16 12:15:36 satellite kernel: RME Hammerfall-DSP: no cards found

I'm using a cardbus hdsp + multiface on a toshiba satellite notebook, with kernel 2.4.18. The computer fails to boot with the card inserted, but accepts the card afterwards, and the host led on the multiface switches down.

cat /proc/pci outputs
Bus  3, device   0, function  0:
    Multimedia audio controller: PCI device 10ee:3fc5 (rev 10). IRQ 10.
      Master Capable.  Latency=64.
      Non-prefetchable 32 bit memory at 0xd2400000 [0xd20fffff]. but syslog shows

May 16 09:54:57 satellite kernel: cs: cb_alloc(bus 3): vendor 0x10ee, device 
0x3fc5
May 16 09:54:57 satellite kernel: PCI: Failed to allocate resource 
0(d2400000-d20fffff) for 03:00.0
May 16 09:54:57 satellite kernel: PCI: Enabling device 03:00.0 (0080 -> 0082)
May 16 09:54:57 satellite cardmgr[258]: socket 0: CardBus hotplug device

Any idea?

Regards,
Thomas

(ps: this is the second time I send this message. The first time I hadn't subscribed so I guess it is waiting in the moderator's mail box. Sorry for double posting. Since then I rebuilt my kernel, and got rid of the freeze at bootup, but the rest still applies.)

but

_______________________________________________________________

Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [email protected]

#1 lore raw
Quoted 22 lines

Hi,
I was very excited and pleased to see hdsp driver had reached cvs (thank you Paul !) , so I gave it a try. Here are the results.
I manage to insmod everything needed except the snd-hdsp module. I get the following in syslog:

May 16 12:11:18 satellite kernel: RME Hammerfall-DSP: no cards found
May 16 12:15:36 satellite kernel: ALSA 
../../alsa-kernel/pci/rme9652/hdsp.c:455: Hammerfall-DSP: no Digiface or 
Multiface connected!
May 16 12:15:36 satellite kernel: RME Hammerfall-DSP: no cards found

I'm using a cardbus hdsp + multiface on a toshiba satellite notebook, with kernel 2.4.18. The computer fails to boot with the card inserted, but accepts the card afterwards, and the host led on the multiface switches down.

cat /proc/pci outputs
Bus �3, device � 0, function �0:
� � Multimedia audio controller: PCI device 10ee:3fc5 (rev 10). � � � IRQ 10.
� � � Master Capable. �Latency=64.
� � � Non-prefetchable 32 bit memory at 0xd2400000 [0xd20fffff]. but syslog shows

Quoted 8 lines
May 16 09:54:57 satellite kernel: cs: cb_alloc(bus 3): vendor 0x10ee, device 
0x3fc5
May 16 09:54:57 satellite kernel: PCI: Failed to allocate resource 
0(d2400000-d20fffff) for 03:00.0
May 16 09:54:57 satellite kernel: PCI: Enabling device 03:00.0 (0080 -> 0082)
May 16 09:54:57 satellite cardmgr[258]: socket 0: CardBus hotplug device

Any idea?

send the output of lspci -vv please, with and without the PCMCIA interface plugged in.

this is not an ALSA issue (yet). it appears that the cardbus/pci bridge code in the kernel may not be working correctly ..

--p

_______________________________________________________________

Hundreds of nodes, one monster rendering program.
Now that�s a super model! Visit http://clustering.foundries.sf.net/