imx8mq: Generate a single bootable flash.bin again
Subsystems (3)
PATCH 1/1 imx8mq: Generate a single bootable flash.bin again
After the conversion to binman in commit c1ecd03d90c7 ("imx: imx8mq_evk:
switch to binman"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed.
Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior.
After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes).
Also update imx8mq_evk.rst to remove the u-boot.itb copy step.
This is a cherry-pick of 028abfd9b157 ("imx8mm-evk: Generate a single bootable flash.bin again") adjusted to apply to i.MX8MQ.
--- arch/arm/dts/imx8mq-u-boot.dtsi | 19 ++++++++++++++++++- arch/arm/mach-imx/imx8m/imximage.cfg | 2 +- doc/board/nxp/imx8mq_evk.rst | 1 - 3 files changed, 19 insertions(+), 3 deletions(-)
arch/arm/dts/imx8mq-u-boot.dtsi +18 -1
@@ -50,7 +50,9 @@ }; }; - flash { + spl { + filename = "spl.bin"; + mkimage { args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
@@ -119,4 +121,19 @@ }; }; }; + + imx-boot { + filename = "flash.bin"; + pad-byte = <0x00>; + + spl: blob-ext@1 { + offset = <0x0>; + filename = "spl.bin"; + }; + + uboot: blob-ext@2 { + offset = <0x57c00>; + filename = "u-boot.itb"; + }; + }; };
arch/arm/mach-imx/imx8m/imximage.cfg +1 -1
@@ -8,4 +8,4 @@ FIT BOOT_FROM sd SIGNED_HDMI signed_hdmi.bin -LOADER mkimage.flash.mkimage 0x7e1000 +LOADER u-boot-spl-ddr.bin 0x7e1000
doc/board/nxp/imx8mq_evk.rst +0 -1
@@ -50,7 +50,6 @@ Burn the flash.bin to MicroSD card offset 33KB: .. code-block:: bash $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc - $sudo dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=notrunc Boot ----
Signature · 1 line
2.34.1
Hi Patrick,
Quoted 15 lines · Patrick Wildt
After the conversion to binman in commit
c1ecd03d90c7("imx:imx8mq_evk:
switch to binman"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed.Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior.
After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes).
Quoted 6 lines
Also update
imx8mq_evk.rstto remove the u-boot.itb copy step.This is a cherry-pick of
028abfd9b157("imx8mm-evk: Generate a single bootable flash.bin again") adjusted to apply to i.MX8MQ.Signed-off-by Patrick Wildt <[email protected]>
Thanks for the patch:
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 11 lines · Patrick Wildt
After the conversion to binman in commit
c1ecd03d90c7("imx:imx8mq_evk:
switch to binman"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed.Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior.
Quoted 8 lines
After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes).
Also update
imx8mq_evk.rstto remove the u-boot.itb copy step.This is a cherry-pick of
028abfd9b157("imx8mm-evk: Generate a single bootable flash.bin again") adjusted to apply to i.MX8MQ.
"apply to imx8mq_evk."
Also, the subject should be imx8mq_evk: Generate...
Feel free to resubmit with these two minor changes and keep my Reviewed-by tag.
Thanks,
Fabio Estevam
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 23 lines · Fabio Estevam
Quoted 11 lines · Patrick Wildt
After the conversion to binman in commit
c1ecd03d90c7("imx:imx8mq_evk:
switch to binman"), it is necessary to flash both flash.bin and u-boot.itb to get a bootable system. Prior to this commit, only flash.bin was needed.Such new requirement breaks existing distro mechanisms to generate the final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single bootable binary to keep the original behavior.
Quoted 8 lines
After this change the SPL binary is called spl.bin, which is a more descriptive name for its purpose, and can still be used standalone (for example, for secure boot purposes).
Also update
imx8mq_evk.rstto remove the u-boot.itb copy step.This is a cherry-pick of
028abfd9b157("imx8mm-evk: Generate a single bootable flash.bin again") adjusted to apply to i.MX8MQ."apply to
imx8mq_evk."
Quoted 8 lines
Also, the subject should be
imx8mq_evk: Generate...Feel free to resubmit with these two minor changes and keep my Reviewed-by tag.
Thanks,
Fabio Estevam
Hi,
but it's not only imx8mq_evk. Tom has merged the patchset that switches *all* i.MX8MQ boards to Binman, which means that this change touches not only imx8mq_evk but all i.MX8MQ boards. The only thing that is specific to imx8mq_evk is the documentation change.
Should I still change it?
Thanks,
Patrick
Quoted 4 lines · Patrick Wildt
but it's not only
imx8mq_evk. Tom has merged the patchset that switches *all* i.MX8MQ boards to Binman, which means that this change touches not onlyimx8mq_evkbut all i.MX8MQ boards. The only thing that is specific toimx8mq_evkis the documentation change.
Ah, OK. It was not clear when I read the commit log, but I agree now after reading your reply.
Quoted 1 line
Should I still change it?
Maybe put in the commit log that all i.MX8MQ boards have been converted to binman would avoid some confusion.
Thanks,
Fabio Estevam
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-60 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 10 lines · Fabio Estevam
Quoted 4 lines · Patrick Wildt
but it's not only
imx8mq_evk. Tom has merged the patchset that switches *all* i.MX8MQ boards to Binman, which means that this change touches not onlyimx8mq_evkbut all i.MX8MQ boards. The only thing that is specific toimx8mq_evkis the documentation change.Ah, OK. It was not clear when I read the commit log, but I agree now after reading your reply.
Quoted 8 lines
Quoted 1 line
Should I still change it?
Maybe put in the commit log that all i.MX8MQ boards have been converted to binman would avoid some confusion.
Thanks,
Fabio Estevam
Ok, I agree that the previous wording as bad. I have sent a v2 *without* your Reviewed-By tag. Please have a look and check if you like that wording better.
Thanks,
Patrick