Skip to contentSkip to conversation

Reset doesn't work on the 440EP Bamboo reference board

U-Boot-Users Youngchul Bang (방영철) 2 participants 3 messages Sep 13, 2005 – Sep 14, 2005

lore
Share & tools
lore
#0 lore raw

Hi,

I have been trying to get U-Boot and Linux running on the AMCC 440EP "Bamboo" reference board. Most U-Boot commands are working. However, I've got problems about reset command and switch.

First, reset command does not work except after cp.b command performed (i.e. cp.b 100000 fff80000 80000). I don't know why it works well after cp.b command. Reboot command in Linux doesn't work neither. U-Boot version is 1.1.3 and Linux kernel is 2.6.13. Is it related to the same reason?

Second, the reset switch does not work. I've been confirmed that SYSTEM_RESET line is getting pulled down when I push the reset switch.

When I try to get PIBS instead of U-Boot on the same board, the above problems haven't happened.

Had the problems been discussed before in this list? I can't find any of conversations about them. If so, give me the url please.

Let me know how to fix them up.

Thanks in advance,

Youngchul Bang

#1 lore raw

Hi Youngchul,

Quoted 3 lines · Youngchul Bang

I have been trying to get U-Boot and Linux running on the AMCC 440EP "Bamboo" reference board. Most U-Boot commands are working. However, I've got problems about reset command and switch.

I just checked this problem with our bamboo board and a current U-Boot
version: No problem here:

Hit any key to stop autoboot: 0
=> reset

U-Boot 1.1.4 (Aug 24 2005 - 11:12:52)

AMCC PowerPC 440EP Rev. B
Board: Bamboo - AMCC PPC440EP Evaluation Board

        VCO: 800 MHz
        CPU: 400 MHz
        PLB: 100 MHz
        OPB: 50 MHz
        EPB: 25 MHz
I2C:   ready
DRAM:  192 MB
FLASH:  5 MB
PCI:   Bus Dev VenId DevId Class Int
In:    serial
Out:   serial
Err:   serial
NAND:  64 MB

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot: 0

Quoted 5 lines

First, reset command does not work except after cp.b command performed (i.e. cp.b 100000 fff80000 80000). I don't know why it works well after cp.b command. Reboot command in Linux doesn't work neither. U-Boot version is 1.1.3 and Linux kernel is 2.6.13. Is it related to the same reason?

Hmmm. U-Boot version 1.1.3 covers over 1/2 year of code versions. Please use the current version (top cvs) and give it a nother try. As you may have noticed, the AMCC 4xx boards have received a major cleanup in the last weeks.

Quoted 2 lines

Second, the reset switch does not work. I've been confirmed that SYSTEM_RESET line is getting pulled down when I push the reset switch.

Do I understand this right: You push the reset button, and the board does not reset! Strange.

Quoted 5 lines

When I try to get PIBS instead of U-Boot on the same board, the above problems haven't happened.

Had the problems been discussed before in this list? I can't find any of conversations about them. If so, give me the url please.

No.

Quoted 1 line

Let me know how to fix them up.

See above. Try the current version and let me know, if the problem still occurs.

Another question: Do you have a debugger connected while resetting the board?

Best regards,
Stefan

#2 lore raw

Hi Stefan,

Thank you for your reply.

Quoted 3 lines · Stefan Roese

Hmmm. U-Boot version 1.1.3 covers over 1/2 year of code versions. Please use the current version (top cvs) and give it a nother try. As you may have noticed, the AMCC 4xx boards have received a major cleanup in the last weeks.

I tried the current version. Reset command works well.

Quoted 5 lines
Quoted 2 lines

Second, the reset switch does not work. I've been confirmed that SYSTEM_RESET line is getting pulled down when I push the reset switch.

Do I understand this right: You push the reset button, and the board does not reset! Strange.

I forgot I deleted some of codes in flash_get_size() when I added support for SST flash. It's the reason for my problems. My mistake.

Quoted 1 line

Another question: Do you have a debugger connected while resetting the board?

No. I don't

Best regards,

Youngchul