Reset doesn't work on the 440EP Bamboo reference board
Hi,
I have been trying to get U-Boot and Linux running on the AMCC 440EP "Bamboo" reference board. Most U-Boot commands are working. However, I've got problems about reset command and switch.
First, reset command does not work except after cp.b command performed (i.e. cp.b 100000 fff80000 80000). I don't know why it works well after cp.b command. Reboot command in Linux doesn't work neither. U-Boot version is 1.1.3 and Linux kernel is 2.6.13. Is it related to the same reason?
Second, the reset switch does not work. I've been confirmed that SYSTEM_RESET line is getting pulled down when I push the reset switch.
When I try to get PIBS instead of U-Boot on the same board, the above problems haven't happened.
Had the problems been discussed before in this list? I can't find any of conversations about them. If so, give me the url please.
Let me know how to fix them up.
Thanks in advance,
Youngchul Bang
Hi Youngchul,
Quoted 3 lines · Youngchul Bang
I have been trying to get U-Boot and Linux running on the AMCC 440EP "Bamboo" reference board. Most U-Boot commands are working. However, I've got problems about reset command and switch.
I just checked this problem with our bamboo board and a current U-Boot
version: No problem here:
Hit any key to stop autoboot: 0
=> reset
U-Boot 1.1.4 (Aug 24 2005 - 11:12:52)
AMCC PowerPC 440EP Rev. B
Board: Bamboo - AMCC PPC440EP Evaluation Board
VCO: 800 MHz
CPU: 400 MHz
PLB: 100 MHz
OPB: 50 MHz
EPB: 25 MHz
I2C: ready
DRAM: 192 MB
FLASH: 5 MB
PCI: Bus Dev VenId DevId Class Int
In: serial
Out: serial
Err: serial
NAND: 64 MBType "run flash_nfs" to mount root filesystem over NFS
Hit any key to stop autoboot: 0
Quoted 5 lines
First, reset command does not work except after cp.b command performed (i.e. cp.b 100000
fff8000080000). I don't know why it works well after cp.b command. Reboot command in Linux doesn't work neither. U-Boot version is 1.1.3 and Linux kernel is 2.6.13. Is it related to the same reason?
Hmmm. U-Boot version 1.1.3 covers over 1/2 year of code versions. Please use the current version (top cvs) and give it a nother try. As you may have noticed, the AMCC 4xx boards have received a major cleanup in the last weeks.
Quoted 2 lines
Second, the reset switch does not work. I've been confirmed that
SYSTEM_RESETline is getting pulled down when I push the reset switch.
Do I understand this right: You push the reset button, and the board does not reset! Strange.
Quoted 5 lines
When I try to get PIBS instead of U-Boot on the same board, the above problems haven't happened.
Had the problems been discussed before in this list? I can't find any of conversations about them. If so, give me the url please.
No.
Quoted 1 line
Let me know how to fix them up.
See above. Try the current version and let me know, if the problem still occurs.
Another question: Do you have a debugger connected while resetting the board?
Best regards,
Stefan
Hi Stefan,
Thank you for your reply.
Quoted 3 lines · Stefan Roese
Hmmm. U-Boot version 1.1.3 covers over 1/2 year of code versions. Please use the current version (top cvs) and give it a nother try. As you may have noticed, the AMCC 4xx boards have received a major cleanup in the last weeks.
I tried the current version. Reset command works well.
Quoted 5 lines
Quoted 2 lines
Second, the reset switch does not work. I've been confirmed that
SYSTEM_RESETline is getting pulled down when I push the reset switch.Do I understand this right: You push the reset button, and the board does not reset! Strange.
I forgot I deleted some of codes in flash_get_size() when I added support for SST flash. It's the reason for my problems. My mistake.
Quoted 1 line
Another question: Do you have a debugger connected while resetting the board?
No. I don't
Best regards,
Youngchul