Initial support for the XPedite5170
Subsystems (2)
cover Initial support for the XPedite5170
Initial support for Extreme Engineering Solutions XPedite5170 - a MPC8640-based 3U VPX single board computer with a PMC/XMC site.
http://www.xes-inc.com/Products/XPedite5170/XPedite5170.html
Peter Tyser (6):
85xx: Add PORBMSR and PORDEVSR shift defines
86xx: Unlock l1 cache unconditionally
xes: Update Freescale PCI code to work with 86xx processors
xes: Update Freescale DDR code to work with 86xx processors
xes: Update Freescale clock code to work with 86xx processors XPedite5170 board support
Zach LeRoy (1):
tsec: Add support for BCM5482S PHY
MAINTAINERS | 1 +
MAKEALL | 1 +
Makefile | 3 +
board/xes/common/Makefile | 7 +-
.../xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} | 8 +
.../xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} | 8 +-
.../xes/common/{fsl_85xx_pci.c => fsl_8xxx_pci.c} | 81 ++-
board/xes/xpedite5170/Makefile | 52 ++
board/xes/xpedite5170/config.mk | 32 +
board/xes/xpedite5170/ddr.c | 168 +++++
board/xes/xpedite5170/law.c | 52 ++
board/xes/xpedite5170/u-boot.lds | 132 ++++
board/xes/xpedite5170/xpedite5170.c | 111 +++
drivers/net/tsec.c | 41 ++
include/asm-ppc/immap_85xx.h | 2 +
include/configs/XPEDITE5170.h | 758 ++++++++++++++++++++
include/tsec.h | 2 +
lib_ppc/board.c | 8 +-
lib_ppc/bootm.c | 3 +-
19 files changed, 1453 insertions(+), 17 deletions(-)
rename board/xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} (86%)
rename board/xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} (92%)
rename board/xes/common/{fsl_85xx_pci.c => fsl_8xxx_pci.c} (79%)
create mode 100644 board/xes/xpedite5170/Makefile
create mode 100644 board/xes/xpedite5170/config.mk
create mode 100644 board/xes/xpedite5170/ddr.c
create mode 100644 board/xes/xpedite5170/law.c
create mode 100644 board/xes/xpedite5170/u-boot.lds
create mode 100644 board/xes/xpedite5170/xpedite5170.c
create mode 100644 include/configs/XPEDITE5170.hPATCH 1/7 85xx: Add PORBMSR and PORDEVSR shift defines
Add defines similar to those already used for the the 86xx architecture. This will ease sharing of PCI code between the 85xx and 86xx architectures.
--- include/asm-ppc/immap_85xx.h | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
include/asm-ppc/immap_85xx.h +2 -0
@@ -1528,6 +1528,7 @@ typedef struct ccsr_gur {#endif uint porbmsr;/* 0xe0004 - POR boot mode status register */ #define MPC85xx_PORBMSR_HA 0x00070000 +#define MPC85xx_PORBMSR_HA_SHIFT 16uint porimpscr;/* 0xe0008 - POR I/O impedance status and control register */ uint pordevsr;/* 0xe000c - POR I/O device status regsiter */ #define MPC85xx_PORDEVSR_SGMII1_DIS 0x20000000
@@ -1537,6 +1538,7 @@ typedef struct ccsr_gur {#define MPC85xx_PORDEVSR_SRDS2_IO_SEL 0x38000000#define MPC85xx_PORDEVSR_PCI1 0x00800000#define MPC85xx_PORDEVSR_IO_SEL 0x00780000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19#define MPC85xx_PORDEVSR_PCI2_ARB 0x00040000#define MPC85xx_PORDEVSR_PCI1_ARB 0x00020000#define MPC85xx_PORDEVSR_PCI1_PCI32 0x00010000
Signature · 1 line
1.6.2.1
Kumar Gala
AppliedPATCH 1/7 85xx: Add PORBMSR and PORDEVSR shift defines
Quoted 9 lines · Peter Tyser
Add defines similar to those already used for the the 86xx architecture.
This will ease sharing of PCI code between the 85xx and 86xx architectures.Signed-off-by Peter Tyser <[email protected]>---
include/asm-ppc/immap_85xx.h| 2 ++1 files changed, 2 insertions(+), 0 deletions(-)
applied to next
- k
PATCH 2/7 tsec: Add support for BCM5482S PHY
In reply to Peter TyserFrom: Zach LeRoy <[email protected]>
--- drivers/net/tsec.c | 41 +++++++++++++++++++++++++++++++++++++++++ include/tsec.h | 2 ++ 2 files changed, 43 insertions(+), 0 deletions(-)
drivers/net/tsec.c +41 -0
@@ -468,6 +468,18 @@ uint mii_parse_link(uint mii_reg, struct tsec_private *priv) }/* +* "Ethernet at Wirespeed" needs to be enabled to achieve link in certain +* circumstances. eg a gigabit TSEC connected to a gigabit switch with +* a 4-wire ethernet cable. Both ends advertise gigabit, but can't +* link. "Ethernet at Wirespeed" reduces advertised speed until link +* can be achieved. +*/ +uint mii_BCM54xx_wirespeed (uint mii_reg,struct tsec_private *priv) +{ +return (read_phy_reg (priv, mii_reg) &0x8FFF ) |0x8010 ; +} + +/* * Parse the BCM54xx status register for speed and duplex information. * The linux sungem_phy has this information, but in a table format. */
@@ -1070,6 +1082,34 @@ struct phy_info phy_info_BCM5464S = { }, }; +struct phy_info phy_info_BCM5482S = { +0x0143bcb , +"Broadcom BCM5482S" , +4 , + (struct phy_cmd []) {/* config */ +/* Reset and configure the PHY */ + {MIIM_CONTROL ,MIIM_CONTROL_RESET ,NULL }, +/* Setup read from auxilary control shadow register 7 */ + {MIIM_BCM54xx_AUXCNTL,MIIM_BCM54xx_AUXCNTL_ENCODE (7 ),NULL }, +/* Read Misc Control register and or in Ethernet at Wirespeed */ + {MIIM_BCM54xx_AUXCNTL,0 , &mii_BCM54xx_wirespeed}, + {MIIM_CONTROL ,MIIM_CONTROL_INIT , &mii_cr_init}, + {miim_end,} + }, + (struct phy_cmd []) {/* startup */ +/* Status is read once to clear old link state */ + {MIIM_STATUS , miim_read,NULL }, +/* Auto-negotiate */ + {MIIM_STATUS , miim_read, &mii_parse_sr}, +/* Read the status */ + {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr}, + {miim_end,} + }, + (struct phy_cmd []) {/* shutdown */ + {miim_end,} + }, +}; +struct phy_info phy_info_M88E1011S = {0x01410c6 ,"Marvell 88E1011S" ,
@@ -1611,6 +1651,7 @@ struct phy_info *phy_info[] = { &phy_info_cis8201, &phy_info_BCM5461S, &phy_info_BCM5464S, + &phy_info_BCM5482S, &phy_info_M88E1011S, &phy_info_M88E1111S, &phy_info_M88E1118,
include/tsec.h +2 -0
@@ -152,6 +152,8 @@#define MIIM_EXT_PAGE_ACCESS 0x1f/* Broadcom BCM54xx -- taken from linux sungem_phy */ +#define MIIM_BCM54xx_AUXCNTL 0x18 +#define MIIM_BCM54xx_AUXCNTL_ENCODE (val) ((val & 0x7) << 12)|(val & 0x7)#define MIIM_BCM54xx_AUXSTATUS 0x19#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
Signature · 1 line
1.6.2.1
PATCH 2/7 tsec: Add support for BCM5482S PHY
Quoted 7 lines · Peter Tyser
From: Zach LeRoy <[email protected]>
Signed-off-by Zach LeRoy <[email protected]>---
drivers/net/tsec.c| 41 +++++++++++++++++++++++++++++++++++++++++include/tsec.h| 2 ++2 files changed, 43 insertions(+), 0 deletions(-)
Ben,
This seems fine to me.. can you pick it up via the u-boot-net tree for next.
- k
PATCH 2/7 tsec: Add support for BCM5482S PHY
Quoted 11 lines · Kumar Gala
Quoted 7 lines · Peter Tyser
From: Zach LeRoy <[email protected]>
Signed-off-by Zach LeRoy <[email protected]>---
drivers/net/tsec.c| 41 +++++++++++++++++++++++++++++++++++++++++include/tsec.h| 2 ++2 files changed, 43 insertions(+), 0 deletions(-)
Quoted 9 lines
Acked-by Kumar Gala <[email protected]>Ben,
This seems fine to me.. can you pick it up via the u-boot-net tree for next.
- k
Sure
-- Ben
PATCH 3/7 86xx: Unlock l1 cache unconditionally
In reply to Peter TyserPreviously, it was only unlocked when Linux was executed using the "bootm" command. Unlocking it unconditionally improves U-Boot performance and provides a common cache state when booting OSes.
--- lib_ppc/board.c | 8 +++++--- lib_ppc/bootm.c | 3 ++- 2 files changed, 7 insertions(+), 4 deletions(-)
lib_ppc/board.c +5 -3
@@ -68,7 +68,8 @@#if defined(CONFIG_LOGBUFFER )#include <logbuff.h> #endif -#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && defined(CONFIG_E500 ) +#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && \ + (defined(CONFIG_E500 ) || defined(CONFIG_MPC86xx))#include <asm/cache.h> #endif #ifdef CONFIG_PS2KBD
@@ -754,8 +755,9 @@ void board_init_r (gd_t *id, ulong dest_addr)icache_enable ();/* it's time to enable the instruction cache */ #endif -#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && defined(CONFIG_E500 ) -unlock_ram_in_cache ();/* it's time to unlock D-cache in e500 */ +#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && \ + (defined(CONFIG_E500 ) || defined(CONFIG_MPC86xx)) +unlock_ram_in_cache ();/* it's time to unlock D-cache */ #endif #if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45 )
lib_ppc/bootm.c +2 -1
@@ -71,7 +71,8 @@ static void boot_jump_linux(bootm_headers_t *images)show_boot_progress (15 ); -#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && !defined(CONFIG_E500 ) +#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && \ + !defined(CONFIG_E500 ) && !defined(CONFIG_MPC86xx)unlock_ram_in_cache ();#endif
Signature · 1 line
1.6.2.1
PATCH 3/7 86xx: Unlock l1 cache unconditionally
Quoted 9 lines · Peter Tyser
Previously, it was only unlocked when Linux was executed using the "bootm" command. Unlocking it unconditionally improves U-Boot performance and provides a common cache state when booting OSes.
Signed-off-by Peter Tyser <[email protected]>---
lib_ppc/board.c | 8 +++++--- lib_ppc/bootm.c | 3 ++- 2 files changed, 7 insertions(+), 4 deletions(-)
Wolfgang, do you know any reason we can't do the unlock for ALL ppc's in board_init_r()?
- k
Quoted 49 lines
lib_ppc/board.c +5
-3@@ -68,7 +68,8 @@#if defined(CONFIG_LOGBUFFER )#include <logbuff.h> #endif -#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && defined(CONFIG_E500 ) +#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && \ + (defined(CONFIG_E500 ) || defined(CONFIG_MPC86xx))#include <asm/cache.h> #endif #ifdef CONFIG_PS2KBD @@ -754,8 +755,9 @@ void board_init_r (gd_t *id, ulong dest_addr)icache_enable ();/* it's time to enable the instruction cache */ #endif -#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && defined(CONFIG_E500 ) -unlock_ram_in_cache ();/* it's time to unlock D-cache in e500 */ +#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && \ + (defined(CONFIG_E500 ) || defined(CONFIG_MPC86xx)) +unlock_ram_in_cache ();/* it's time to unlock D-cache */ #endif #if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45 )lib_ppc/bootm.c +2
-1@@ -71,7 +71,8 @@ static void boot_jump_linux(bootm_headers_t *images)show_boot_progress (15 ); -#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && !defined(CONFIG_E500 ) +#if defined(CONFIG_SYS_INIT_RAM_LOCK ) && \ + !defined(CONFIG_E500 ) && !defined(CONFIG_MPC86xx)unlock_ram_in_cache ();#endif Signature · 6 lines
1.6.2.1 _______________________________________________ U-Boot mailing list U-Boot at lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
PATCH 3/7 86xx: Unlock l1 cache unconditionally
Dear Kumar Gala,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines · Peter Tyser
Previously, it was only unlocked when Linux was executed using the "bootm" command. Unlocking it unconditionally improves U-Boot performance and provides a common cache state when booting OSes.
Quoted 8 lines
Quoted 5 lines
Signed-off-by Peter Tyser <[email protected]>---
lib_ppc/board.c | 8 +++++--- lib_ppc/bootm.c | 3 ++- 2 files changed, 7 insertions(+), 4 deletions(-)Wolfgang, do you know any reason we can't do the unlock for ALL ppc's in
board_init_r()?
Sorry, I don't remember if there was any speciofic reason, or what that might have been. Maybe the CHANGELOGs contain some hints?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Sometimes a feeling is all we humans have to go on. -- Kirk, "A Taste of Armageddon", stardate 3193.9
PATCH 3/7 86xx: Unlock l1 cache unconditionally
Quoted 16 lines · Wolfgang Denk
Dear Kumar Gala,
Quoted 13 lines · In message <[email protected]> you wrote:
Quoted 9 lines · Peter Tyser
Previously, it was only unlocked when Linux was executed using the "bootm" command. Unlocking it unconditionally improves U-Boot performance and provides a common cache state when booting OSes.
Signed-off-by Peter Tyser <[email protected]>---
lib_ppc/board.c | 8 +++++--- lib_ppc/bootm.c | 3 ++- 2 files changed, 7 insertions(+), 4 deletions(-)
Quoted 5 lines
Quoted 2 lines
Wolfgang, do you know any reason we can't do the unlock for ALL ppc's in
board_init_r()?Sorry, I don't remember if there was any speciofic reason, or what that might have been. Maybe the CHANGELOGs contain some hints?
The only platforms the define unlock_ram_in_cache() are 83xx, 85xx, 86xx, and 74xx_7xx.
It looks like the most of them had "issues" in their implementation that could explain why there weren't enabled:
83xx - ade50c7fa1b16ef98be17e9c3ae286aecf4f5605, 6eb2a44e27919fdc601e0c05404b298a7602c0e3
86xx - 392438406041415fe64ab8748ec5ab5ad01d1cf7
74xx - d685b74c64a38849f1a129b3ab846fbf67dd937e
85xx - this one works
My best guess was all the non-85xx implementations had bugs or other issues that caused U-Boot to become unstable after unlocking the cache. Perhaps those bugs are fixed now, but I only have 86xx hardware to test on. I've been running a few 86xx boards with the cache unlocked with no noticeable problems.
Peter
PATCH 3/7 86xx: Unlock l1 cache unconditionally
Dear Peter Tyser,
Quoted 13 lines · In message <[email protected]> you wrote:
The only platforms the define
unlock_ram_in_cache()are 83xx, 85xx, 86xx, and 74xx_7xx.It looks like the most of them had "issues" in their implementation that could explain why there weren't enabled:
83xx -ade50c7fa1b16ef98be17e9c3ae286aecf4f5605,6eb2a44e27919fdc601e0c05404b298a7602c0e386xx -
392438406041415fe64ab8748ec5ab5ad01d1cf774xx -
d685b74c64a38849f1a129b3ab846fbf67dd937e
Quoted 7 lines
85xx - this one works
My best guess was all the non-85xx implementations had bugs or other issues that caused U-Boot to become unstable after unlocking the cache. Perhaps those bugs are fixed now, but I only have 86xx hardware to test on. I've been running a few 86xx boards with the cache unlocked with no noticeable problems.
Thanks for the analysis. So let's go ahead and do this globally.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Karl's version of Parkinson's Law: Work expands to exceed the time alloted it.
PATCH 3/7 86xx: Unlock l1 cache unconditionally
Quoted 18 lines · Wolfgang Denk
Dear Peter Tyser,
Quoted 15 lines · In message <[email protected]> you wrote:
The only platforms the define
unlock_ram_in_cache()are 83xx, 85xx, 86xx, and 74xx_7xx.It looks like the most of them had "issues" in their implementation that could explain why there weren't enabled:
83xx -ade50c7fa1b16ef98be17e9c3ae286aecf4f5605,6eb2a44e27919fdc601e0c05404b298a7602c0e386xx -
392438406041415fe64ab8748ec5ab5ad01d1cf774xx -
d685b74c64a38849f1a129b3ab846fbf67dd937e85xx - this one works
Quoted 7 lines
Quoted 5 lines
My best guess was all the non-85xx implementations had bugs or other issues that caused U-Boot to become unstable after unlocking the cache. Perhaps those bugs are fixed now, but I only have 86xx hardware to test on. I've been running a few 86xx boards with the cache unlocked with no noticeable problems.
Thanks for the analysis. So let's go ahead and do this globally.
I'll submit a patch. Hopefully someone with an 83xx and 74xx/7xx board can give it a shot before you apply it.
Best,
Peter
PATCH 4/7 xes: Update Freescale PCI code to work with 86xx processors
In reply to Peter Tyser---
board/xes/common/Makefile | 2 +-
.../xes/common/{fsl_85xx_pci.c => fsl_8xxx_pci.c} | 81 +++++++++++++++++--
2 files changed, 73 insertions(+), 10 deletions(-)
rename board/xes/common/{fsl_85xx_pci.c => fsl_8xxx_pci.c} (79%)board/xes/common/Makefile +1 -1
@@ -29,7 +29,7 @@ endif LIB = $(obj)lib$(VENDOR).a -COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_85xx_pci.o +COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8572_clk.o COBJS-$(CONFIG_MPC85xx) += fsl_85xx_ddr.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o
board/xes/common/fsl_8xxx_pci.c renamed from board/xes/common/fsl_85xx_pci.c +72 -9
137 lines not on this page · raw message
Signature · 1 line
1.6.2.1
Kumar Gala
AppliedPATCH 4/7 xes: Update Freescale PCI code to work with 86xx processors
Quoted 7 lines · Peter Tyser
Signed-off-by Peter Tyser <[email protected]>---
board/xes/common/Makefile | 2 +-.../xes/common/{fsl_85xx_pci.c=>fsl_8xxx_pci.c} | 81 +++++++++++
++++++--2 files changed, 73 insertions(+), 10 deletions(-)rename
board/xes/common/{fsl_85xx_pci.c=>fsl_8xxx_pci.c} (79%)
applied to next
- k
PATCH 5/7 xes: Update Freescale DDR code to work with 86xx processors
In reply to Peter Tyser---
board/xes/common/Makefile | 2 +-
.../xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} | 8 +++++++-
2 files changed, 8 insertions(+), 2 deletions(-)
rename board/xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} (92%)board/xes/common/Makefile +1 -1
@@ -31,7 +31,7 @@ LIB = $(obj)lib$(VENDOR).a COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8572_clk.o -COBJS-$(CONFIG_MPC85xx) += fsl_85xx_ddr.o +COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
board/xes/common/fsl_8xxx_ddr.c renamed from board/xes/common/fsl_85xx_ddr.c +7 -1
@@ -32,9 +32,10 @@ phys_size_t initdram(int board_type) {phys_size_t dram_size =fsl_ddr_sdram (); +#ifdef CONFIG_MPC85xx dram_size =setup_ddr_tlbs (dram_size /0x100000 ); - dram_size *=0x100000 ; +#endif #if defined(CONFIG_DDR_ECC ) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER )/* Initialize and enable DDR ECC */
@@ -48,7 +49,12 @@ phys_size_t initdram(int board_type)void board_add_ram_info (int use_default) {#if (CONFIG_NUM_DDR_CONTROLLERS >1 ) +#if defined(CONFIG_MPC85xx)volatile ccsr_ddr_t *ddr1 = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); +#elif defined(CONFIG_MPC86xx) +volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; +volatile ccsr_ddr_t *ddr1 = &immap->im_ddr1; +#endif #endif puts (" (" );
Signature · 1 line
1.6.2.1
Kumar Gala
AppliedPATCH 5/7 xes: Update Freescale DDR code to work with 86xx processors
Quoted 6 lines · Peter Tyser
Signed-off-by Peter Tyser <[email protected]>---
board/xes/common/Makefile | 2 +- .../xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-)rename
board/xes/common/{fsl_85xx_ddr.c=>fsl_8xxx_ddr.c} (92%)
applied to next
- k
PATCH 6/7 xes: Update Freescale clock code to work with 86xx processors
In reply to Peter Tyser---
board/xes/common/Makefile | 3 ++-
.../xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} | 8 ++++++++
2 files changed, 10 insertions(+), 1 deletions(-)
rename board/xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} (86%)board/xes/common/Makefile +2 -1
@@ -30,7 +30,8 @@ endif LIB = $(obj)lib$(VENDOR).a COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o -COBJS-$(CONFIG_MPC8572) += fsl_8572_clk.o +COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o +COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o
board/xes/common/fsl_8xxx_clk.c renamed from board/xes/common/fsl_8572_clk.c +8 -0
@@ -27,7 +27,12 @@*/ unsigned long get_board_sys_clk (ulong dummy) { +#if defined(CONFIG_MPC85xx)volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#elif defined(CONFIG_MPC86xx) +immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; +volatile ccsr_gur_t *gur = &immap->im_gur; +#endif u32 gpporcr = gur->gpporcr;if (gpporcr &0x10000 )
@@ -36,8 +41,10 @@ unsigned long get_board_sys_clk(ulong dummy)return 50000000 ; } +#ifdef CONFIG_MPC85xx/* * Return DDR input clock - synchronous with SYSCLK or 66 MHz +* Note: 86xx doesn't support asynchronous DDR clk */ unsigned long get_board_ddr_clk (ulong dummy) {
@@ -49,3 +56,4 @@ unsigned long get_board_ddr_clk(ulong dummy) return 66666666; } +#endif
Signature · 1 line
1.6.2.1
Kumar Gala
AppliedPATCH 6/7 xes: Update Freescale clock code to work with 86xx processors
Quoted 6 lines · Peter Tyser
Signed-off-by Peter Tyser <[email protected]>---
board/xes/common/Makefile | 3 ++- .../xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} | 8 ++++++++ 2 files changed, 10 insertions(+), 1 deletions(-)rename
board/xes/common/{fsl_8572_clk.c=>fsl_8xxx_clk.c} (86%)
applied to next
- k
PATCH 7/7 XPedite5170 board support
In reply to Peter TyserInitial support for Extreme Engineering Solutions XPedite5170 - a MPC8640-based 3U VPX single board computer with a PMC/XMC site.
--- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/xes/xpedite5170/Makefile | 52 +++ board/xes/xpedite5170/config.mk | 32 ++ board/xes/xpedite5170/ddr.c | 168 ++++++++ board/xes/xpedite5170/law.c | 52 +++ board/xes/xpedite5170/u-boot.lds | 132 ++++++ board/xes/xpedite5170/xpedite5170.c | 111 +++++ include/configs/XPEDITE5170.h | 758 +++++++++++++++++++++++++++++++++++ 10 files changed, 1310 insertions(+), 0 deletions(-) create mode 100644 board/xes/xpedite5170/Makefile create mode 100644 board/xes/xpedite5170/config.mk create mode 100644 board/xes/xpedite5170/ddr.c create mode 100644 board/xes/xpedite5170/law.c create mode 100644 board/xes/xpedite5170/u-boot.lds create mode 100644 board/xes/xpedite5170/xpedite5170.c create mode 100644 include/configs/XPEDITE5170.h
MAINTAINERS +1 -0
@@ -428,6 +428,7 @@ Rune Torgersen <[email protected]> Peter Tyser <[email protected]> + XPEDITE5170 MPC8640 XPEDITE5200 MPC8548 XPEDITE5370 MPC8572
MAKEALL +1 -0
@@ -407,6 +407,7 @@ LIST_86xx=" \ MPC8610HPCD \ MPC8641HPCN \ sbc8641d \ + XPEDITE5170 \ " #########################################################################
Makefile +3 -0
@@ -2558,6 +2558,9 @@ MPC8641HPCN_config: unconfig sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d +XPEDITE5170_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes + ######################################################################### ## 74xx/7xx Systems #########################################################################
board/xes/xpedite5170/Makefile new file +52 -0
52 lines not on this page · raw message
board/xes/xpedite5170/config.mk new file +32 -0
@@ -0,0 +1,32 @@ +# +# Copyright 2009 Extreme Engineering Solutions, Inc. +# Copyright 2007-2008 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# XPedite5170 +# +TEXT_BASE = 0xfff00000 + +PLATFORM_RELFLAGS += -mrelocatable + +PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float
board/xes/xpedite5170/ddr.c new file +168 -0
168 lines not on this page · raw message
board/xes/xpedite5170/law.c new file +52 -0
52 lines not on this page · raw message
board/xes/xpedite5170/u-boot.lds new file +132 -0
132 lines not on this page · raw message
board/xes/xpedite5170/xpedite5170.c new file +111 -0
111 lines not on this page · raw message
include/configs/XPEDITE5170.h new file +758 -0
758 lines not on this page · raw message
Signature · 1 line
1.6.2.1