Skip to contentSkip to conversation

arm/kirkwood: add dreamplug support.

RFC PATCH New linux_arm at lakedaemon.net 2 participants 5 messages Jun 14, 2011

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover arm/kirkwood: add dreamplug support.

From: Jason Cooper <[email protected]>

All,

This is an RFC patch series until mach-types is updated. This compiles, loads, runs, and sees the SPI flash.

Concerns:

- I sent an email to rmk a day or two ago regarding updating the mach-types, but haven't heard. I know he's busy, just wanted to make sure I was doing it right. I requested it here [1].

- I haven't had a chance to confirm the LED mappings are correct.

- Once the mach-types are updated, I'll drop the first patch, it's just for folks who want to try the series and have it build and run.

[1] http://www.arm.linux.org.uk/developer/machines/list.php?id=3550

Jason Cooper (2):
arm/kirkwood: TEMP hack till mach-types is updated. arm/kirkwood: add dreamplug support.

 arch/arm/mach-kirkwood/Kconfig           |    6 ++
 arch/arm/mach-kirkwood/Makefile          |    1 +
 arch/arm/mach-kirkwood/dreamplug-setup.c |  144 ++++++++++++++++++++++++++++++
 arch/arm/tools/mach-types                |    1 +
 4 files changed, 152 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-kirkwood/dreamplug-setup.c
#1 lore raw

RFC PATCH 1/2 arm/kirkwood: TEMP hack till mach-types is updated.

From: Jason Cooper <[email protected]>

DO NOT SUBMIT!

---
 arch/arm/tools/mach-types |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/tools/mach-types +1 -0
index 3b3776d..d5c5779 100644
@@ -1113,3 +1113,4 @@ blissc			MACH_BLISSC		BLISSC			3491
 thales_adc		MACH_THALES_ADC		THALES_ADC		3492
 ubisys_p9d_evp		MACH_UBISYS_P9D_EVP	UBISYS_P9D_EVP		3493
 atdgp318		MACH_ATDGP318		ATDGP318		3494
+dreamplug		MACH_DREAMPLUG		DREAMPLUG		3550
Signature · 1 line
1.7.0.4
#2 lore raw

RFC PATCH 2/2 arm/kirkwood: add dreamplug support.

In reply to linux_arm at lakedaemon.net

From: Jason Cooper <[email protected]>

Copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash.

---
 arch/arm/mach-kirkwood/Kconfig           |    6 ++
 arch/arm/mach-kirkwood/Makefile          |    1 +
 arch/arm/mach-kirkwood/dreamplug-setup.c |  144 ++++++++++++++++++++++++++++++
 3 files changed, 151 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-kirkwood/dreamplug-setup.c
arch/arm/mach-kirkwood/Kconfig +6 -0
index 7fc603b..e93c610 100644
@@ -44,6 +44,12 @@ config MACH_GURUPLUG
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell GuruPlug Reference Board.
 
+config MACH_DREAMPLUG
+	bool "Marvell DreamPlug Reference Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DreamPlug Reference Board.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
arch/arm/mach-kirkwood/Makefile +1 -0
index 5dcaa81..c443a13 100644
@@ -7,6 +7,7 @@ obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)	+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_GURUPLUG)		+= guruplug-setup.o
+obj-$(CONFIG_MACH_DREAMPLUG)		+= dreamplug-setup.o
 obj-$(CONFIG_MACH_DOCKSTAR)		+= dockstar-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
arch/arm/mach-kirkwood/dreamplug-setup.c new file +144 -0

144 lines not on this page · raw message

Signature · 1 line
1.7.0.4
#3 lore raw

cover arm/kirkwood: add dreamplug support.

In reply to linux_arm at lakedaemon.net

Am Dienstag 14 Juni 2011, 21:52:53 schrieb linux_arm at lakedaemon.net:

Quoted 3 lines

From: Jason Cooper <[email protected]>
This is an RFC patch series until mach-types is updated. This compiles, loads, runs, and sees the SPI flash.

Hi Jason,

in case no one else reply to your patch. I wanted to submit a patch, which adds support for the LS-XHL, based on kirkwood, too. Old-fashioned machine support files won't be accepted anymore. Instead you would have to submit a DTS once the kirkwood arch has support for device trees.

Signature · 1 line
Michael
author
#4 lore raw

cover arm/kirkwood: add dreamplug support.

Quoted 10 lines · Michael Walle

Am Dienstag 14 Juni 2011, 21:52:53 schrieb linux_arm at lakedaemon.net:

Quoted 3 lines

From: Jason Cooper <[email protected]>
This is an RFC patch series until mach-types is updated. This compiles, loads, runs, and sees the SPI flash.

in case no one else reply to your patch. I wanted to submit a patch, which adds support for the LS-XHL, based on kirkwood, too. Old-fashioned machine support files won't be accepted anymore. Instead you would have to submit a DTS once the kirkwood arch has support for device trees.

Ahhh, that's the key word I was missing. :-) I had been reading up on the arch/arm/* cleanup, and saw that SoC drivers should go in drivers/, but had missed the DTS bit.

Off to read...

thx,

Jason.