Fix -Wunused-but-set-variable in mwifiex/

This patchset is part of the effort led by Arnd Bergmann to clean up warnings in the kernel. This and following patchsets will focus on "-Wunused-but-set-variable" as it among the noisier ones. These were found compiling with W=1.

---
Changes in v2:
- Reapplied patches on top of wireless-drivers-next.
- Patch 5/7 ("mwifiex: Remove unused 'pm_flag' variable") had to be redone slightly. The others applied cleanly with 'patch -p1'.

Kirtika Ruchandani (7):
mwifiex: Removed unused mwifiex_private* 'priv' variable
mwifiex: Remove unused 'chan_num' variable
mwifiex: Remove unused 'sta_ptr' variable
mwifiex: Remove unused 'adapter'variable
mwifiex: Remove unused 'pm_flag' variable
mwifiex: Removed unused 'pkt_type' variable
mwifiex: Remove unused 'bcd_usb' variable

 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 --
 drivers/net/wireless/marvell/mwifiex/main.c     | 3 ---
 drivers/net/wireless/marvell/mwifiex/scan.c     | 8 +++-----
 drivers/net/wireless/marvell/mwifiex/sdio.c     | 5 -----
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c  | 2 --
 drivers/net/wireless/marvell/mwifiex/usb.c      | 3 +--
 6 files changed, 4 insertions(+), 19 deletions(-)

2.8.0.rc3.226.g39d4020

Commit bec568ff5107 removed the last remaining usage of struct mwifiex_private* priv in mwifiex_fw_dpc(), by removing the call to mwifiex_del_virtual_intf().
Compiling mwifiex/ with W=1 gives the following warning, fix it. mwifiex/main.c: In function ‘mwifiex_fw_dpc’:
mwifiex/main.c:520:26: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable]

---
 drivers/net/wireless/marvell/mwifiex/main.c | 3 ---
 1 file changed, 3 deletions(-)

index eac44fe..e5c3a8a 100644
@@ -518,7 +518,6 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 {
 	int ret;
 	char fmt[64];
-	struct mwifiex_private *priv;
 	struct mwifiex_adapter *adapter = context;
 	struct mwifiex_fw_image fw;
 	bool init_failed = false;

@@ -576,8 +575,6 @@ static void mwifiex_fw_dpc(const struct firmware *firmware, void *context)
 			goto err_init_fw;
 	}
 
-	priv = adapter->priv[MWIFIEX_BSS_ROLE_STA];
-
 	if (!adapter->wiphy) {
 		if (mwifiex_register_cfg80211(adapter)) {
 			mwifiex_dbg(adapter, ERROR,

2.8.0.rc3.226.g39d4020

7 patches applied to wireless-drivers-next.git, thanks.

70d740598713 mwifiex: Removed unused mwifiex_private* 'priv' variable 8ac9134161d9 mwifiex: Remove unused 'chan_num' variable 2c2bcabf02e1 mwifiex: Remove unused 'sta_ptr' variable 60261b266a84 mwifiex: Remove unused 'adapter'variable e9f1db8b6859 mwifiex: Remove unused 'pm_flag' variable 67dd2a754906 mwifiex: Removed unused 'pkt_type' variable 4133828c76c3 mwifiex: Remove unused 'bcd_usb' variable

https://patchwork.kernel.org/patch/9444651/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

Commit b5413e6b2228 removed all uses of chan_num in mwifiex_config_scan(). Compiling mwifiex with W=1 gives the following warning, fix it.

mwifiex/scan.c: In function ‘mwifiex_config_scan’:
mwifiex/scan.c:830:6: warning: variable ‘chan_num’ set but not used [-Wunused-but-set-variable]

---
 drivers/net/wireless/marvell/mwifiex/scan.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

index 98ce072..1816916 100644
@@ -827,7 +827,6 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 	u32 num_probes;
 	u32 ssid_len;
 	u32 chan_idx;
-	u32 chan_num;
 	u32 scan_type;
 	u16 scan_dur;
 	u8 channel;

@@ -1105,13 +1104,12 @@ mwifiex_config_scan(struct mwifiex_private *priv,
 			mwifiex_dbg(adapter, INFO,
 				    "info: Scan: Scanning current channel only\n");
 		}
-		chan_num = chan_idx;
 	} else {
 		mwifiex_dbg(adapter, INFO,
 			    "info: Scan: Creating full region channel list\n");
-		chan_num = mwifiex_scan_create_channel_list(priv, user_scan_in,
-							    scan_chan_list,
-							    *filtered_scan);
+		mwifiex_scan_create_channel_list(priv, user_scan_in,
+						 scan_chan_list,
+						 *filtered_scan);
 	}
 
 }

2.8.0.rc3.226.g39d4020

Commit 429d90d2212b introduced mwifiex_cmd_tdls_oper() which initializes
struct mwifiex_sta_node* sta_ptr, but does not use it. Compiling with W=1 gives
the following warning, fix it.
mwifiex/sta_cmd.c: In function ‘mwifiex_cmd_tdls_oper’:
mwifiex/sta_cmd.c:1732:27: warning: variable ‘sta_ptr’ set but not used [-Wunused-but-set-variable]

---
 drivers/net/wireless/marvell/mwifiex/sta_cmd.c | 2 --
 1 file changed, 2 deletions(-)

index bcd6408..768c519 100644
@@ -1746,7 +1746,6 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 {
 	struct host_cmd_ds_tdls_oper *tdls_oper = &cmd->params.tdls_oper;
 	struct mwifiex_ds_tdls_oper *oper = data_buf;
-	struct mwifiex_sta_node *sta_ptr;
 	struct host_cmd_tlv_rates *tlv_rates;
 	struct mwifiex_ie_types_htcap *ht_capab;
 	struct mwifiex_ie_types_qos_info *wmm_qos_info;

@@ -1764,7 +1763,6 @@ mwifiex_cmd_tdls_oper(struct mwifiex_private *priv,
 
 	tdls_oper->reason = 0;
 	memcpy(tdls_oper->peer_mac, oper->peer_mac, ETH_ALEN);
-	sta_ptr = mwifiex_get_sta_entry(priv, oper->peer_mac);
 
 	pos = (u8 *)tdls_oper + sizeof(struct host_cmd_ds_tdls_oper);
 

2.8.0.rc3.226.g39d4020

Commit 3935ccc14d2c introduced mwifiex_tm_cmd() which initializes
struct mwifiex_adapter* adapter, but doesn't use it.
Compiling with W=1 gives the following warning, fix it.
mwifiex/cfg80211.c: In function ‘mwifiex_tm_cmd’:
mwifiex/cfg80211.c:3973:26: warning: variable ‘adapter’ set but not used [-Wunused-but-set-variable]

---
 drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 --
 1 file changed, 2 deletions(-)

index c26469a..a231f09 100644
@@ -3980,13 +3980,11 @@ static int mwifiex_tm_cmd(struct wiphy *wiphy, struct wireless_dev *wdev,
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
 	struct mwifiex_ds_misc_cmd *hostcmd;
 	struct nlattr *tb[MWIFIEX_TM_ATTR_MAX + 1];
-	struct mwifiex_adapter *adapter;
 	struct sk_buff *skb;
 	int err;
 
 	if (!priv)
 		return -EINVAL;
-	adapter = priv->adapter;
 
 	err = nla_parse(tb, MWIFIEX_TM_ATTR_MAX, data, len,
 			mwifiex_tm_policy);

2.8.0.rc3.226.g39d4020

mwifiex_sdio_resume() intializes pm_flag, just like
mwifiex_sdio_suspend(), but does not use it. Compiling with W=1 gives
the following warning, fix it.
mwifiex/sdio.c: In function ‘mwifiex_sdio_resume’:
mwifiex/sdio.c:234:16: warning: variable ‘pm_flag’ set but not used [-Wunused-but-set-variable]

sdio_get_host_pm_caps() is just an acessor, so the call to it is safe to remove. The unused variable seems to be present since 5e6e3a92b9a4 which introduced mwifiex_sdio_resume().

---
 drivers/net/wireless/marvell/mwifiex/sdio.c | 2 --
 1 file changed, 2 deletions(-)

index 0d00db5..6c9f16e 100644
@@ -186,9 +186,7 @@ static int mwifiex_sdio_resume(struct device *dev)
 	struct sdio_func *func = dev_to_sdio_func(dev);
 	struct sdio_mmc_card *card;
 	struct mwifiex_adapter *adapter;
-	mmc_pm_flag_t pm_flag = 0;
 
-	pm_flag = sdio_get_host_pm_caps(func);
 	card = sdio_get_drvdata(func);
 	if (!card || !card->adapter) {
 		dev_err(dev, "resume: invalid card or adapter\n");

2.8.0.rc3.226.g39d4020

Commit 92263a841b15 introduced mwifiex_deaggr_sdio_pkt which initializes variable pkt_type but does not use it. Compiling with W=1 gives the following warning, fix it.
mwifiex/sdio.c: In function ‘mwifiex_deaggr_sdio_pkt’:
mwifiex/sdio.c:1198:6: warning: variable ‘pkt_type’ set but not used [-Wunused-but-set-variable]

---
 drivers/net/wireless/marvell/mwifiex/sdio.c | 3 ---
 1 file changed, 3 deletions(-)

index 6c9f16e..09c586f 100644
@@ -1134,7 +1134,6 @@ static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter,
 {
 	u32 total_pkt_len, pkt_len;
 	struct sk_buff *skb_deaggr;
-	u32 pkt_type;
 	u16 blk_size;
 	u8 blk_num;
 	u8 *data;

@@ -1155,8 +1154,6 @@ static void mwifiex_deaggr_sdio_pkt(struct mwifiex_adapter *adapter,
 			break;
 		}
 		pkt_len = le16_to_cpu(*(__le16 *)(data + SDIO_HEADER_OFFSET));
-		pkt_type = le16_to_cpu(*(__le16 *)(data + SDIO_HEADER_OFFSET +
-					 2));
 		if ((pkt_len + SDIO_HEADER_OFFSET) > blk_size) {
 			mwifiex_dbg(adapter, ERROR,
 				    "%s: error in pkt_len,\t"

2.8.0.rc3.226.g39d4020

mwifiex_usb_probe() defines and sets bcd_usb but does not use it,
Compiling with W=1 gives the following warning, fix it.
mwifiex/usb.c: In function ‘mwifiex_usb_probe’:
mwifiex/usb.c:383:41: warning: variable ‘bcd_usb’ set but not used [-Wunused-but-set-variable]

The unused variable seems to be present since 4daffe354366 which introduced mwifiex_usb_probe().

---
 drivers/net/wireless/marvell/mwifiex/usb.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

index c3f696a..c563160 100644
@@ -379,7 +379,7 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
 	struct usb_endpoint_descriptor *epd;
 	int ret, i;
 	struct usb_card_rec *card;
-	u16 id_vendor, id_product, bcd_device, bcd_usb;
+	u16 id_vendor, id_product, bcd_device;
 
 	card = devm_kzalloc(&intf->dev, sizeof(*card), GFP_KERNEL);
 	if (!card)

@@ -390,7 +390,6 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
 	id_vendor = le16_to_cpu(udev->descriptor.idVendor);
 	id_product = le16_to_cpu(udev->descriptor.idProduct);
 	bcd_device = le16_to_cpu(udev->descriptor.bcdDevice);
-	bcd_usb = le16_to_cpu(udev->descriptor.bcdUSB);
 	pr_debug("info: VID/PID = %X/%X, Boot2 version = %X\n",
 		 id_vendor, id_product, bcd_device);
 

2.8.0.rc3.226.g39d4020

Thanks for this cleanup work.
Patch series looks fine to me.

Regards,
Amitkumar